- HOME
- POLYMER SEARCH
- Oxide
- Magnesium Oxide
- GBC L3 Steatite
GBC L3 Steatite
| Category | Ceramic , Oxide , Magnesium Oxide , Silicon Oxide |
| Manufacturer | GBC Materials |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | GBC L3 Steatite.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Ideal for high frequency, low loss, high voltage insulation. Much less expensive than alumina insulatorsApplications: resistor forms, surge arrestors, standoffs, spacers, and coil forms.Machinability: easily fabricated to close tolerances.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 2.50 g/cc | 0.0903 lb/in³ |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Ultimate | 59.0 MPa | 8560 psi | |
| Flexural Strength | 120 MPa | 17400 psi | |
| Compressive Strength | 600 MPa | 87000 psi |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 8.00 µm/m-°C @Temperature 20.0 °C |
4.44 µin/in-°F @Temperature 68.0 °F |
|
| Thermal Conductivity | 3.00 W/m-K | 20.8 BTU-in/hr-ft²-°F | |
| Maximum Service Temperature, Air | 1000 °C | 1830 °F |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Electrical Resistivity | 2.10e+12 ohm-cm | 2.10e+12 ohm-cm | |
| Dielectric Constant | 5.9 | 5.9 | |
| Dielectric Strength | 8.86 kV/mm | 225 kV/in | |
| Dissipation Factor | 0.0035 | 0.0035 | |
| Dielectric Loss Index | 0.016 | 0.016 | at 100 MHz |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Color | Off White |
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved