Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

LG Chemical LUPOL TE5208 PP+Rubber+MF, High Impact

Category Polymer , Thermoplastic , Polypropylene (PP) , Polypropylene, Mineral Reinforced, Impact Modified
Manufacturer LG Chemical
Trade Name LUPOL
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF LG Chemical LUPOL TE5208 PP+Rubber+MF, High Impact.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Description: Injection Molding, PP+Rubber+MF, High Impact, Good WeatherabilityApplication: Automotive Exterior (Bumper Fascia, Rear Bumper Step)Information provided by LG Chemical
Physical Properties Metric English Comments
Specific Gravity 0.970 - 1.00 g/cc
0.970 - 1.00 g/cc
ASTM D792
Maximum Moisture Content 0.010
0.010
Injection Molding
Linear Mold Shrinkage, Flow 0.0070 - 0.010 cm/cm

@Thickness 3.20 mm
0.0070 - 0.010 in/in

@Thickness 0.126 in
ASTM D955
Melt Flow 30 g/10 min

@Load 2.16 kg,
Temperature 230 °C
30 g/10 min

@Load 4.76 lb,
Temperature 446 °F
ASTM D1238
Mechanical Properties Metric English Comments
Tensile Strength, Yield 18.6 MPa

@Thickness 3.20 mm
2700 psi

@Thickness 0.126 in
50mm/min; ASTM D638
Elongation at Break 180 %

@Thickness 3.20 mm
180 %

@Thickness 0.126 in
50mm/min; ASTM D638
Flexural Yield Strength 27.0 MPa

@Thickness 6.40 mm
3910 psi

@Thickness 0.252 in
10mm/min; ASTM D790
Flexural Modulus 1.57 GPa

@Thickness 6.40 mm
228 ksi

@Thickness 0.252 in
10mm/min; ASTM D790
Izod Impact, Notched >= 0.598 J/cm

@Thickness 6.40 mm,
Temperature -30.0 °C
>= 1.12 ft-lb/in

@Thickness 0.252 in,
Temperature -22.0 °F
ASTM D256
>= 4.71 J/cm

@Thickness 6.40 mm,
Temperature 23.0 °C
>= 8.82 ft-lb/in

@Thickness 0.252 in,
Temperature 73.4 °F
ASTM D256
Thermal Properties Metric English Comments
Deflection Temperature at 0.46 MPa (66 psi) 120 °C

@Thickness 6.40 mm
248 °F

@Thickness 0.252 in
Unannealed; ASTM D648
Processing Properties Metric English Comments
Rear Barrel Temperature 190 - 210 °C
374 - 410 °F
Injection Molding
Middle Barrel Temperature 200 - 230 °C
392 - 446 °F
Injection Molding
Front Barrel Temperature 200 - 230 °C
392 - 446 °F
Injection Molding
Nozzle Temperature 210 - 230 °C
410 - 446 °F
Injection Molding
Melt Temperature 200 - 230 °C
392 - 446 °F
Injection Molding
Mold Temperature 40.0 - 60.0 °C
104 - 140 °F
Injection Molding
Drying Temperature 70.0 - 80.0 °C
158 - 176 °F
Injection Molding
Dry Time 3.00 - 4.00 hour
3.00 - 4.00 hour
Injection Molding
Back Pressure 29.4 - 58.8 MPa
4260 - 8530 psi
Injection Molding
Screw Speed 30 - 60 rpm
30 - 60 rpm
Injection Molding
Copyright © lookpolymers.com All Rights Reserved