Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Materion AlBeMet® AM 162 HIP'd Billet, Annealed

Category Metal , Metal Matrix Composite , Nonferrous Metal , Beryllium Alloy
Manufacturer Materion Corporation (former Brush Wellman)
Trade Name AlBeMet®
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Materion AlBeMet® AM 162 HIP'd Billet, Annealed.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
This is a powder metallurgical product produced by gas atomization available as rod, bar, tube and sheet. These shapes are derived by consolidating the Al/Be powder by hot isostatic pressing (HIP) and cold isostatic pressing (CIP) followed by extrusion or sheet rolling processes. The material is also available as an investment casting under the name AlBeCastâ„¢.Used for heat sinks and structural parts in aircraft and satellite avionics because of its low density, high modulus, high thermal conductivity, low CTE, thermal stability and isotropic properties. Please note that there are health hazards associated with beryllium, especially when present as airborne particles generated during processing. As with any material, be aware of hazards and take steps to reduce exposure to a safe level.Information provided by Brush Wellman.Brush Engineered Materials Inc. changed its name to Materion Corporation in March 2011.
Physical Properties Metric English Comments
Density 2.071 g/cc
0.07482 lb/in³
Mechanical Properties Metric English Comments
Tensile Strength, Ultimate >= 262 MPa
>= 38000 psi
Minimum
307 MPa
44500 psi
Typical
Tensile Strength, Yield >= 193 MPa
>= 28000 psi
Minimum
226 MPa
32800 psi
Typical
Elongation at Break >= 2.0 %
>= 2.0 %
Minimum
5.0 %
5.0 %
Typical
Modulus of Elasticity 193 GPa
28000 ksi
Poissons Ratio 0.17
0.17
Shear Modulus 82.0 GPa
11900 ksi
calculated
Thermal Properties Metric English Comments
CTE, linear 13.91 µm/m-°C

@Temperature 25.0 °C
7.728 µin/in-°F

@Temperature 77.0 °F
Specific Heat Capacity 1.56 J/g-°C

@Temperature 20.0 °C
0.373 BTU/lb-°F

@Temperature 68.0 °F
Thermal Conductivity 210 W/m-K
1460 BTU-in/hr-ft²-°F
Melting Point 1082 °C
1980 °F
Component Elements Properties Metric English Comments
Aluminum, Al 38 %
38 %
As remainder
Beryllium, Be 60 - 64 %
60 - 64 %
Carbon, C 0.00 - 0.10 %
0.00 - 0.10 %
Other, each 0.00 - 0.20 %
0.00 - 0.20 %
Oxygen, O 0.00 - 1.0 %
0.00 - 1.0 %
Electrical Properties Metric English Comments
Electrical Resistivity 0.00000350 ohm-cm

@Temperature 20.0 °C
0.00000350 ohm-cm

@Temperature 68.0 °F
Copyright © lookpolymers.com All Rights Reserved