- HOME
- POLYMER SEARCH
- Lubricant
- Lithium Gellant
- Nye Lubricants 781D (NG) Synthetic Oil
Nye Lubricants 781D (NG) Synthetic Oil
| Category | Fluid , Lubricant , Lithium Gellant , Organic Soap Gellant , Silicone Base |
| Manufacturer | Nye Lubricants |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Nye Lubricants 781D (NG) Synthetic Oil.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information provided by Nye Lubricants.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Viscosity Measurement | 371 | 371 | Viscosity Index of Base Oil; ASTM D2270 |
| Kinematic Viscosity at 40°C (104°F) | 55 cSt | 55 cSt | Base Oil; ASTM D445 |
| Kinematic Viscosity at 100°C (212°F) | 19.5 cSt | 19.5 cSt | Base Oil; ASTM D445 |
| Evaporation Loss | 0.30 % | 0.30 % | 24 hrs, 100C; ASTM D972 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Penetration P(0), 1/10 mm | 255 | 255 | ASTM D217 |
| Penetration P(60), 1/10 mm | 281 | 281 | ASTM D217 |
| Oil Separation | 1.2 % | 1.2 % | 24 hrs, 100C; FTM 719B, 321.2 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 200 °C | 392 °F | Recommended |
| Minimum Service Temperature, Air | -70.0 °C | -94.0 °F | Recommended |
| Pour Point | -73.0 °C | -99.4 °F | Base Oil; ASTM D97 |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Base Fluid Type | Sil.(Clrphn) | |
| Gellant Type | Li soap |
Users viewing this material also viewed the following:
- SABIC Innovative Plastics LNP STAT-KON PFD06 PA 6 (Asia Pacific)
- Master Bond SteelMaster 43HT Stainless Steel Filled Two Component Epoxy System
- ConocoPhillips Conoflex® 32 SRI Lubricant ISO
- Barlog Plastics KEBAFORM C 2027 POM Copolymer, 20% glass fiber reinforced
- American Computer Optics 17in Tempered LCD Glass
- Ashley Polymers Ashlene® 525-B2 Nylon 66
- MV Labs RH465 Na3RhCl6 Sodium hexachlororhodate(III)
- Phillips 66 COPYLENE® CM360N Polypropylene, Impact Copolymer, Injection Molding
- Saint-Gobain CHR® M57 Polyester Film Backing Natural Rubber Adhesive Pressure Sensitive Tape
Copyright © lookpolymers.com All Rights Reserved