Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Teknor Apex Uniprene® UN-2467A Thermoplastic Vulcanizate

Category Polymer , Thermoplastic , Elastomer, TPE , Thermoplastic Vulcanizate Elastomer (TPV)
Manufacturer Teknor Apex Company
Trade Name UNIPRENE®
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Teknor Apex Uniprene® UN-2467A Thermoplastic Vulcanizate.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Notes: Injection Rate: Fast Uses: Expansion Joint; Grommets; Tubing; Gaskets; Plugs; Weatherstripping; Glazing; Shock Absorbing Pads Forms: Pellets Processing Method: Extrusion; Injection Molding Extrusion Notes: Screw Speed: 30 to 100 rpmInformation Provided by Teknor Apex
Physical Properties Metric English Comments
Specific Gravity 0.990 g/cc
0.990 g/cc
ASTM D792
Linear Mold Shrinkage 0.015 cm/cm
0.015 in/in
ASTM D955
Linear Mold Shrinkage, Transverse 0.014 cm/cm
0.014 in/in
ASTM D955
Mechanical Properties Metric English Comments
Hardness, Shore A 85
85
15 seconds; ASTM D2240
Tensile Strength at Break 16.5 MPa
2400 psi
ASTM D412
Tensile Stress 7.93 MPa

@Strain 100 %
1150 psi

@Strain 100 %
ASTM D412
Elongation at Break 400 %
400 %
ASTM D412
Tear Strength 70.1 kN/m
400 pli
ASTM D624
Compression Set 60 %

@Temperature 125 °C,
Time 79200 sec
60 %

@Temperature 257 °F,
Time 22.0 hour
ASTM D395B
Processing Properties Metric English Comments
Rear Barrel Temperature 173 - 213 °C
344 - 416 °F
Middle Barrel Temperature 179 - 219 °C
354 - 426 °F
Front Barrel Temperature 184 - 224 °C
364 - 436 °F
Nozzle Temperature 190 - 230 °C
374 - 446 °F
Zone 1 166 - 204 °C
330 - 400 °F
Zone 2 171 - 210 °C
340 - 410 °F
Zone 3 177 - 216 °C
350 - 420 °F
Zone 5 182 - 221 °C
360 - 430 °F
Die Temperature 190 - 227 °C
374 - 440 °F
Melt Temperature 190 - 230 °C
374 - 446 °F
Processing Temperature
Mold Temperature 35.0 - 60.0 °C
95.0 - 140 °F
Injection Pressure 1.38 - 6.89 MPa
200 - 1000 psi
Back Pressure 0.172 - 0.862 MPa
25.0 - 125 psi
Cushion 0.381 - 2.54 cm
0.150 - 1.00 in
Screw Speed 50 - 120 rpm
50 - 120 rpm
Descriptive Properties Value Comments
Appearance Opaque
Copyright © lookpolymers.com All Rights Reserved