Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.31 g/cc | 0.0473 lb/in³ | ISO 1183 |
Polykemi AB SCANAMID 66 A12^ F25 NH10 Nylon 66, Glass Fiber Reinforced, Flame Retardant Information provided by Polykemi AB |
|||
Density | 1.31 g/cc | 0.0473 lb/in³ | ±0.03 g/cm³; DIN 53479 |
PolyOne Bergamid™ A700 G15 HW UF Polyamide 66 (Nylon 66) These products contain flame retardants which are activated by longer residence times in the cylinder and then can decompose. At interruption of the moulding cycle (approx. >5 min) it is recommended.. |
|||
Density | 1.31 g/cc | 0.0473 lb/in³ | ASTM D792 |
SABIC Innovative Plastics LNP LUBRICOMP EX00548C PEI LNP LUBRICOMP* EX00548C is a compound based on Polyetherimide resin containing Proprietary Fillers. Added features of this material include: Clean Compounding System, Wear Resistant. |
|||
Density | 1.31 g/cc | 0.0473 lb/in³ | ASTM D792 |
SABIC Innovative Plastics LNP LUBRICOMP GL003 PSU LNP* Lubricomp* GL003 is a compound based on Polysulfone resin containing 15% PTFE. Added features of this material include: Internally Lubricated. |
|||
Density | 1.31 g/cc | 0.0473 lb/in³ | ASTM D 792 |
SABIC Innovative Plastics LNP Lubricomp GX07409X PSU Wear resistant PSUThis data was supplied by SABIC-IP for the Americas region. |
|||
Density | 1.31 g/cc | 0.0473 lb/in³ | ISO 1183 |
SABIC Innovative Plastics LNP LUBRICOMP RCL34 PA 66 (Europe-Africa-Middle East) LNP* Lubricomp* RCL34 is a compound based on Nylon 66 resin containing PTFE, Carbon Fiber. Added features of this material include: Electrically Conductive. |
|||
Density | 1.31 g/cc | 0.0473 lb/in³ | ASTM D792 |
Techmer ES HiFill® PA4/6 CF30 30% Carbon Filled (Conditioned) Availability: North AmericaForms: PelletsFiller/Reinforcement: Carbon Fiber Reinforcement, 30% Filler by WeightAdditive: Heat StabilizerFeatures: Heat StabilizedInformation provided by TP Composites.. |
|||
Density | 1.31 g/cc | 0.0473 lb/in³ | ASTM D792 |
Techmer ES HiFill® PA6 GF/M25 HS L BK 25% Glass/Mineral Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass/Mineral, 25% Filler by WeightAdditive: Heat Stabilizer and LubricantFeatures: Heat Stabilized and LubricatedAppearance: BlackTPCI.. |
|||
Density | 1.31 g/cc | 0.0473 lb/in³ | ASTM D792 |
SABIC Innovative Plastics LNP STAT-LOY 9X03508 PPO+PA66 LNP* STAT-LOY* 9X03508 is a compound based on PPO+PA66 resin containing Proprietary Filler(s). Added features of this material include: Antistatic, Flame Retardant, High Impact. |
|||
Density | 1.31 g/cc | 0.0473 lb/in³ | ASTM D792 |
Techmer ES HiFill® PBT 1226 Availability: North AmericaForms: PelletsFeatures: Medium FlowAppearance: Natural ColorInformation provided by TP Composites, Inc. |
|||
Density | 1.31 g/cc | 0.0473 lb/in³ | ASTM D792 |
Techmer ES HiFill® PBT 620 Availability: North AmericaForms: PelletsFeatures: Medium FlowAppearance: Natural ColorInformation provided by TP Composites, Inc. |
|||
Density | 1.31 g/cc | 0.0473 lb/in³ | ISO 1183 |
SABIC Innovative Plastics LNP STAT-LOY AF3009 ABS LNP* STAT-LOY* AF3009 is a compound based on ABS resin containing 10% Glass Fiber. Added features of this material include: Antistatic, Flame Retardant. |
|||
Density | 1.31 g/cc | 0.0473 lb/in³ | ASTM D792 |
Techmer ES HiFill® PSU GF10 10% Glass Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber Reinforcement, 10% Filler by WeightInformation provided by TP Composites, Inc. |
|||
Density | 1.31 g/cc | 0.0473 lb/in³ | ASTM D792 |
SABIC Innovative Plastics LNP THERMOCOMP DF003E PC LNP* Thermocomp* DF003E is a compound based on Polycarbonate resin containing 15% Glass Fiber. Added features of this material include: Easy Molding. |
|||
Density | 1.31 g/cc | 0.0473 lb/in³ | ISO 1183 |
SABIC Innovative Plastics Xenoy® X4850 PBT+PC (Asia Pacific) Xenoy X4850 is a hydrostable, high modulus, high ductile PC/PBT blend. Furthermore, this resin provides high chemicalresistance, very low creep, low CTE, excellent fatique and high heat dimensional .. |
|||
Density | 1.31 g/cc | 0.0473 lb/in³ | |
Covestro Makroblend® UT-620 G Polycarbonate + Polyester Blend Key Features:Contains FillerHigh impact or high impact modifiedLight stabilized or stable to lightSuitable processing methods:Injection moldingInformation provided by Bayer Polymers.As of 1 Septembe.. |
|||
Density | 1.31 g/cc | 0.0473 lb/in³ | DAM; ISO 1183 |
DuPont Performance Polymers Zytel® RS 30G30HSL BK038A Nylon 610 30% Glass Reinforced Renewably Sourced Polyamide 610 Developed for Extrusion Information provided by DuPont Performance Polymers |
|||
Density | 1.31 g/cc | 0.0473 lb/in³ | JIS-Z-8807 |
Denka REOMER G G3015 Thermoplastic Elastomer, For Extrusion Essentially a thermoplastic elastomer with the characteristics of PVC resin and rubber, with excellent rubber-like elasticity. Offers excellent rubbery characteristics, such as permanent compressive.. |
|||
Density | 1.31 g/cc | 0.0473 lb/in³ | ISO 1183 |
Eurotec® Tecomid® NB40 GR25 NL PA 6 25% glass fiber reinforced Excellent stiffness/toughness balanceHigh mechanical strengthVery good thermal stabilityExcellent flammability characteristicsGood electrical propertiesHigh wear resistance and low frictionVery good.. |
|||
Density | 1.31 g/cc @Temperature 23.0 °C |
0.0473 lb/in³ @Temperature 73.4 °F |
ISO 1183 |
Akro-Plastic Akromid® S3 GF 30 1 (3222) PA 6.10 Dry, 30% Glass Filled A characteristic property of AKROMID® S (PA 6.10) is that it has a renewable-resource content of up to 70 % and therefore fulfils the current definition of a bioplastic. The plant-based raw materia.. |
|||
Density | 1.31 g/cc | 0.0473 lb/in³ | ASTM D792 |
Ashley Polymers Ashlene® 520-25G Nylon 66, 25% Glass Reinforced Nylon 66, 25% glass reinforced.Data provided by the manufacturer |
|||
Density | 1.31 g/cc | 0.0473 lb/in³ | ASTM D792 |
Performance Polymers IPS II PPL-C4050 PEKK (Polyetherketoneketone) Linear Molding Grade Amber pellets; neat resinInformation provided by Infinite Polymer System II. |