Polymer Property : Linear Mold Shrinkage = 0.0090 cm/cm Product List

Physical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Physical Properties	Metric	English	Comments
Linear Mold Shrinkage	0.0090 cm/cm	0.0090 in/in	ASTM D955-89
Multibase Multi-Flex® TPO 1047-1000 COMPOUND The burn rate is 0.53 in/min; ASTM FM VSS 302.Data provided by Multibase.
Linear Mold Shrinkage	0.0090 cm/cm	0.0090 in/in	ASTM D955-89
Multibase Multi-Pro® 2005 T BLK Polypropylene PP compound suitable for automotive applications, meets elevated temperature resistance. Meets ESH-M4D-293-B specifications.Data provided by Multibase.
Linear Mold Shrinkage	0.0090 cm/cm	0.0090 in/in	ASTM D955
Multibase Multi-Pro® 2010 M Polypropylene Mica Filled, 20% by weight.Forms:PelletsProcessing Methods:Injection MoldingInformation provided by Multibase
Linear Mold Shrinkage	0.0090 cm/cm	0.0090 in/in	ASTM D955-89
Multibase Multi-Pro® 2518 CU 25% Mineral Filled Polypropylene Multi-Pro 2518 CU is a mineral reinforced polypropylene compound offering overall balanced impact and stiffness properties. This material is specially formulated with UV stabilization for outdoor ex..
Linear Mold Shrinkage	0.0090 cm/cm	0.0090 in/in	ASTM D955
Multibase Multi-Pro® 2518 CU Polypropylene Calcium Carbonate Filler, 25% by weight.Features:Gloss, High Forms:PelletsProcessing Methods:Injection MoldingInformation provided by Multibase
Linear Mold Shrinkage	0.0090 cm/cm	0.0090 in/in	ASTM D955
RheTech Products FRP257-00 32% Talc Reinforced Polypropylene Copolymer, Flame Retardant, Natural Applications: Electrical component housingsInjection molding conditions reported in table.Information provided by RheTech Products.
Linear Mold Shrinkage	0.0090 - 0.013 cm/cm	0.0090 - 0.013 in/in	With Flow; ISO 2577
Polykemi AB POLYelast TPE RCZ350D UV4 Thermoplastic Elastomer, UV-Resistant Information provided by Polykemi AB
Linear Mold Shrinkage	0.0090 - 0.013 cm/cm	0.0090 - 0.013 in/in	Across Flow; ISO 2577
Polykemi AB POLYelast TPE RCZ350D UV4 Thermoplastic Elastomer, UV-Resistant Information provided by Polykemi AB
Linear Mold Shrinkage	0.0090 - 0.011 cm/cm	0.0090 - 0.011 in/in	Across Flow; ISO 2577
Polykemi AB POLYfill PP CIP15015 UV Polypropylene, Mineral Reinforced Information provided by Polykemi AB
Linear Mold Shrinkage	0.0090 - 0.011 cm/cm	0.0090 - 0.011 in/in	Across Flow; ISO 2577
Polykemi AB POLYfill PPC TS4030 H Polypropylene Copolymer, Mineral Reinforced Information provided by Polykemi AB
Linear Mold Shrinkage	0.0090 - 0.011 cm/cm	0.0090 - 0.011 in/in	With Flow; ISO 2577
Polykemi AB POLYfill PPH TS15040 D Polypropylene Homopolymer, Mineral Reinforced, Detergent Resistant Information provided by Polykemi AB
Linear Mold Shrinkage	0.0090 - 0.013 cm/cm	0.0090 - 0.013 in/in	(longitudinal) Injection; ISO 2257
Raschig Group MELOPLAS® 181 MF Cellulose-reinforced, phenol-modified MF molding compound (MPF) in white and colored shades. High surface hardness, good electrical properties, good mechanical strength, high UV and heat resistanc..
Linear Mold Shrinkage	0.0090 - 0.011 cm/cm	0.0090 - 0.011 in/in	Across Flow; ISO 2577
Polykemi AB POLYfill PP CIP6015F VTUV Polypropylene, Mineral Reinforced, Heat and UV Stabilized Information provided by Polykemi AB
Linear Mold Shrinkage	0.0090 - 0.011 cm/cm	0.0090 - 0.011 in/in	With Flow; ISO 2577
Polykemi AB POLYfill PPH Q15030 E10 Polypropylene Homopolymer, Mineral Reinforced, Elastomer Modified Information provided by Polykemi AB
Linear Mold Shrinkage	0.0090 - 0.015 cm/cm	0.0090 - 0.015 in/in	FRISETTA Test Method
Nilit RECONYL A KV30 Recycled nylon 6.6 for injection molding, 30% glass ball reinforced Recycled nylon 6.6 for injection molding (available only in black).Information provided by Frisetta Polymer, which merged into Nilit Plastics
Linear Mold Shrinkage	0.0090 - 0.014 cm/cm	0.0090 - 0.014 in/in
Lehmann & Voss LUVOCOMÂ® 80-8222 Polyacetal-copolymer, with mineral filler, lubricant modified Applications: Automotive industry, textile- and office machinery, apparatus- and precision engineering.Improved friction and wear behaviour. Emergency running property.Isotropic shrinkage characteri..
Linear Mold Shrinkage	0.0090 cm/cm	0.0090 in/in	ASTM-D955
Ineos ABS TriaxÂ® 3050 ABS/Nylon Alloy, Injection Molding Grade (DAM) TriaxÂ® 3050 resin is an ABS (Acrylonitrile Butadiene Styrene)/Nylon 6 alloy for injection molding. It is a semicrystalline thermoplastic with improved stability to light exposure, excellent proce..
Linear Mold Shrinkage	0.0090 cm/cm	0.0090 in/in	0.125inch wall
Spartech EP5140 Talc Filled Homopolymer Provides the highest level of stiffness and heat resistance of filled olefins. Talc filled grades offer the highest strength properties. Typical applications include extrusion/thermoformed food cont..
Linear Mold Shrinkage	0.0090 - 0.011 cm/cm	0.0090 - 0.011 in/in
A. Schulman POLYTROPE™ TPP 293 Injection Molding Grade Olefinic Thermoplastic Elastomer DescriptionPolytrope TPP293 is an injection molding grade olefinic thermoplastic elastomer. This product is recommended for parts requiring excellent low temperature impact properties with good dim..
Linear Mold Shrinkage	0.0090 - 0.011 cm/cm	0.0090 - 0.011 in/in
A. Schulman POLYTROPE™ TPP 512 Injection Molding Grade Olefinic Thermoplastic Elastomer DescriptionPolytrope TPP 512 is an injection molding grade olefinic thermoplastic elastomer. This product has excellent low temperature impact properties and flow characteristics suitable for moldi..
Linear Mold Shrinkage	0.0090 cm/cm	0.0090 in/in	ASTM D955
Plenco 5482 Phenolic, Granular, Injection Molded PLENCO 05482 is an organic reinforced phenolic molding compound formulated with graphite to improve the abrasion resistance. 05482 is available in black and brown. 05482 is not recommended for elect..
Linear Mold Shrinkage	0.0090 cm/cm	0.0090 in/in
Tisan TISLAMID® 6 30% Mineral Reinforced Nylon 6 TISLAMID has a wide area of application in electric/electronic, automotive, durable goods and telecommunications industries. It demonstrates characteristics such as Excellent chemical resistanceElec..
Linear Mold Shrinkage	0.0090 - 0.011 cm/cm	0.0090 - 0.011 in/in
A. Schulman POLYTROPE™ TPP 293 Injection Molding Grade Olefinic Thermoplastic Elastomer DescriptionPolytrope TPP293 is an injection molding grade olefinic thermoplastic elastomer. This product is recommended for parts requiring excellent low temperature impact properties with good dim..
Linear Mold Shrinkage	0.0090 cm/cm	0.0090 in/in	MD; ASTM D955
Aclo Accutech Polypropylene Homopolymer HP0339W20L Wollastonite Reinforced
Linear Mold Shrinkage	0.0090 cm/cm	0.0090 in/in	ASTM Data; MD
BASF Ultramid® B50 01 PA6 Ultramid B50 01 is a high-viscosity, general-purpose extrusion PA6 grade. It conforms to FDA requirements including, 21 CFR 177.1500,EU Directive 2002/72/EC, the German BfR recommendation "X Polyam..
Linear Mold Shrinkage	0.0090 cm/cm	0.0090 in/in	ASTM D955
Ashley Polymers Ashlene® 830LN Nylon 6 Basic Nylon 6, medium viscosity, lubricated and nucleated for injection molding.Data provided by the manufacturer
Linear Mold Shrinkage	0.0090 cm/cm	0.0090 in/in	ASTM D955
PolyOne Synprene® RT-3890MS Thermoplastic Elastomer - SBC (discontinued **) Description/Features:High Performance Thermoplastic ElastomerUV StabilizedTranslucentApplications:Multi-PurposeMarket:Consumer GoodsProcessing Method:Injection MoldingPolyOne First ChoiceInformation..
Linear Mold Shrinkage	0.0090 - 0.012 cm/cm	0.0090 - 0.012 in/in	ASTM D955
Polymer Resources PPX/NY GP1 Modified PPO, General Purpose PPX/Nylon 6,6 Alloy (Unverified Data**) Process: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples. Information provided by Polymer Resources Corporation.
Linear Mold Shrinkage	0.0090 cm/cm	0.0090 in/in	Injection; ASTM D955
Plaslok 308 Black (INJ) Mineral/Flock Filled Phenolic Molding Compound (discontinued **) Plaslok Corporation was purchased by Plastics Engineering Company (maker of Plenco brand materials) in March 2000. The Plaslok name is no longer in use.Plaslok 308 is a two-stage, mineral and flock..