Polymer Property : Izod Impact, Notched = 0.267 J/cm Product List

Mechanical Properties

Tips: 30 items are displayed at most.

Mechanical Properties	Metric	English	Comments
Izod Impact, Notched	0.267 J/cm @Temperature 23.0 °C	0.500 ft-lb/in @Temperature 73.4 °F	ASTM D256
RheTech Products FRP300-01 20% Talc Reinforced Polypropylene Copolymer, Flame Retardant, Black Applications: Electrical component housingsInjection molding conditions reported in table.Information provided by RheTech Products.
Izod Impact, Notched	0.267 J/cm	0.500 ft-lb/in	0.125 inch bar; ASTM D256
Network Polymers MS 150 IF Styrene Methyl Methacrylate Terpolymer Description: Styrene Methyl Methacrylate TerpolymerInformation provided by Network Polymers Inc.
Izod Impact, Notched	0.267 J/cm	0.500 ft-lb/in	Test Method A (0.125 in bar); ASTM D256
Network Polymers NPP 30-1200 Description: Homopolymer PolypropyleneInformation provided by Network Polymers Inc.
Izod Impact, Notched	0.267 J/cm	0.500 ft-lb/in	ASTM D256 Type A
Quadrant EPP Nylatron® GSM Nylon, Cast MoS2 Filled Type 6 (ASTM Product Data Sheet)
Izod Impact, Notched	0.267 J/cm	0.500 ft-lb/in	ASTM D256
I. Stern 1320NA Prime Homopolymer Polypropylene Features:Good flow characteristicsAntistat propertiesLow odorApplicationsThin wall packagingSmall appliancesAutomotiveInformation provided by I. Stern & Co. Inc.
Izod Impact, Notched	0.267 J/cm	0.500 ft-lb/in	ASTM D256
Global MPP-120-C 20% Mica Reinforced Polypropylene Information provided by Global Polymers Corporation.
Izod Impact, Notched	0.267 J/cm @Temperature 23.0 Â°C	0.500 ft-lb/in @Temperature 73.4 Â°F	1/8'' notched bar; ASTM D256
Ineos H38G-02 Polypropylene Homopolymer This is a polypropylene homopolymer for general purpose injection molding and high speed spinning applications. It is useful for spun bonded nonwovens and partially oriented yarn (POY). This mater..
Izod Impact, Notched	0.267 J/cm @Thickness 3.17 mm	0.500 ft-lb/in @Thickness 0.125 in	ASTM D256
Lucent Polymers TPP-110 Polypropylene, Homopolymer, 10% Talc Filled Melt Flow Adjustable for ApplicationAdd "U" for UV StabilizedAdd "H" for Heat StabilizedInformation provided by Lucent Polymers, Inc.
Izod Impact, Notched	0.267 J/cm @Thickness 3.17 mm	0.500 ft-lb/in @Thickness 0.125 in	ASTM D256
Techmer ES HiFillÂ® PP 0096 S LE Polypropylene Availability: North AmericaForms: PelletsFiller/Reinforcement: Unspecified Filler/ReinforFeatures: Low ExtractablesInformation provided by TP Composites, Inc.
Izod Impact, Notched	0.267 J/cm @Thickness 3.17 mm	0.500 ft-lb/in @Thickness 0.125 in	ASTM D256
Techmer ES HiFillÂ® PP 0096 S2 LE Polypropylene Availability: North AmericaForms: PelletsFiller/Reinforcement: Unspecified Filler/ReinforFeatures: Low ExtractablesInformation provided by TP Composites, Inc.
Izod Impact, Notched	0.267 J/cm @Thickness 3.17 mm	0.500 ft-lb/in @Thickness 0.125 in	ASTM D256
Techmer ES HiFillÂ® PP 0142 B Polypropylene Availability: North AmericaForms: PelletsFiller/Reinforcement: Unspecified Filler/ReinforInformation provided by TP Composites, Inc.
Izod Impact, Notched	0.267 J/cm	0.500 ft-lb/in	ASTM D256
Sumitomo Bakelite DurezÂ® 23570 Phenolic, Injection Grade Durez 23570 Black Phenolic is a glass and mineral filled two-stage, special purpose molding material. It is designed for high strength, good dimensional stability, and electrical properties even aft..
Izod Impact, Notched	0.267 J/cm	0.500 ft-lb/in	ASTM D256
A. Schulman PP 3482-01 Polypropylene Nucleated Homopolymer Polypropylene DescriptionPP 3482 is a nucleated homopolymer polypropylene with excellent heat resistance and stiffness properties.ApplicationThis product is for injection molded applications and is in compliance ..
Izod Impact, Notched	0.267 J/cm	0.500 ft-lb/in	ASTM D256
A. Schulman PP 1102-01 Polypropylene General Purpose, Molding Grade Polypropylene DescriptionPolypropylene PP 1102-01 is a general purpose, molding grade with UL 94 HB approval for use in large and thin wall applications. ApplicationPolypropylene PP 1102-01 meets FDA Regulation..
Izod Impact, Notched	0.267 J/cm	0.500 ft-lb/in	ASTM D256
A. Schulman PP 3482-01 Polypropylene Nucleated Homopolymer Polypropylene DescriptionPP 3482 is a nucleated homopolymer polypropylene with excellent heat resistance and stiffness properties.ApplicationThis product is for injection molded applications and is in compliance ..
Izod Impact, Notched	0.267 J/cm	0.500 ft-lb/in	ASTM D256
A. Schulman PP 3489-01 Polypropylene Homopolymer DescriptionPolypropylene PP 3489-01 is a specially designed homopolymer with excellent stiffness properties. ApplicationTypical applications include high speed extrusion, high speed thin wall injec..
Izod Impact, Notched	0.267 J/cm	0.500 ft-lb/in	ASTM D256
A. Schulman PP 3476 Polypropylene Homopolymer Polypropylene DescriptionPolypropylene PP 3476 is a homopolymer polypropylene for use in the process of multi-filaments, high tenacity continuous filament yarn and fine denier staple fibers. Information provided ..
Izod Impact, Notched	0.267 J/cm	0.500 ft-lb/in	ASTM D256
A. Schulman PP 3468-01 Polypropylene Homopolymer For High Speed Extrusion DescriptionPolypropylene PP 3468-01 is a specially designed homopolymer for high speed extrusion applications. ApplicationTypical applications of PP 3468-01 include profile extrusions, strapping, r..
Izod Impact, Notched	0.267 J/cm	0.500 ft-lb/in	ASTM D256
A. Schulman PP 3476 Polypropylene Homopolymer Polypropylene DescriptionPolypropylene PP 3476 is a homopolymer polypropylene for use in the process of multi-filaments, high tenacity continuous filament yarn and fine denier staple fibers. Information provided ..
Izod Impact, Notched	0.267 J/cm @Thickness 3.17 mm	0.500 ft-lb/in @Thickness 0.125 in	ASTM D256
Entec Hypro™ PPH-T40 Homopolymer Polypropylene, 40% Talc Reinforced Information provided by Entec
Izod Impact, Notched	0.267 J/cm	0.500 ft-lb/in	ASTM D256A
Braskem D115A Homopolymer Polypropylene Description: Multi Purpose, Good Color and Process StabilityApplications: Suggested Uses Include Housewares, Patio Furniture, ClosuresThis resin meets the requirements for olefin polymers as defined..
Izod Impact, Notched	0.267 J/cm	0.500 ft-lb/in	ASTM D256A
Braskem FF018F Homopolymer Polypropylene Description: Excellent Color and Processing Stability, Superior Optical and Mechanical Properties, Broad Processing WindowApplications: Suggested Uses Include BOPP ApplicationsThis resin meets the r..
Izod Impact, Notched	0.267 J/cm @Thickness 3.17 mm	0.500 ft-lb/in @Thickness 0.125 in	ASTM D-256
Axiall 9275J Clear 40 Rigid PVC, Molding, Clear 40 Information provided by Georgia GulfGeorgia Gulf became Axiall Corporation in 2013.
Izod Impact, Notched	0.267 J/cm	0.500 ft-lb/in	ASTM D256
Aclo Accutech Polypropylene HP0315V Homopolymer High Heat Approved to GMP.PP.013
Izod Impact, Notched	0.267 - 0.801 J/cm	0.500 - 1.50 ft-lb/in	Average value: 0.498 J/cm Grade Count:3
Overview of materials for Polyphenylene Sulfide (PPS), NCG Fiber This property data is a summary of similar materials in the MatWeb database for the category "PPS + NGG". Each property range of values reported is minimum and maximum values of appropriate MatWeb e..
Izod Impact, Notched	0.267 J/cm	0.500 ft-lb/in	ASTM D256
A. Schulman PP 1102-01 Polypropylene General Purpose, Molding Grade Polypropylene DescriptionPolypropylene PP 1102-01 is a general purpose, molding grade with UL 94 HB approval for use in large and thin wall applications. ApplicationPolypropylene PP 1102-01 meets FDA Regulation..