Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | 30.0 - 50.0 MPa | 4350 - 7250 psi | Compression; ISO 527 |
Raschig Group AMPLA® 2500 melamine-modified polyester Halogen-free, organically and inorganically filled melamine-modified Polyester molding compound. Excellent elasticity and shock resistance, low post-shrinkage, very good electrical values, high heat.. |
|||
Tensile Strength, Yield | 30.0 MPa | 4350 psi | ISO 527 |
Polimeri Europa Eraclene® MP 90 High Density Polyethylene - Injection Molding Eraclene MP 90 is a high density polyethylene homopolymer resin (HDPE) with antioxidants, suitable for injection molding application.Eraclene MP 90 has a narrow molecular weight distribution and a h.. |
|||
Tensile Strength, Yield | 30.0 MPa | 4350 psi | 50 mm/min |
Polimeri Europa EDISTIR PD RK4514H High Impact Polystyrene (HIPS)
(discontinued **) Symbol according to ISO 1043-1: S/B Designation: Thermoplastic ISO 2897-SB,M,093-06-07-23 UL94 V-2, polybromodiphenylether (PBBE) free, antimony free, HIPS satisfying at 960°C the glow wire test.. |
|||
Tensile Strength, Yield | 30.0 MPa | 4350 psi | ASTM D638 |
Ineos Nova 5800 High Impact Polystyrene
(discontinued **) Balance of toughness and rigidity, Good gloss, USP Class VIApplications: Thermoformed and molded packaging, Drink cups and lids, Structural foam, Custom sheetProperties were determined on injection .. |
|||
Tensile Strength, Yield | 30.0 MPa @Temperature 23.0 °C |
4350 psi @Temperature 73.4 °F |
50 mm/min; ASTM D638 |
Solvay Specialty Polymers Halar® 5001C Polyethylene, Chlorotrifluoroethylene (ECTFE)
(Unverified Data**)& Powder grades for masterbatches.Information provided by Solvay Specialty Polymers. |
|||
Tensile Strength, Yield | 30.0 - 98.0 MPa | 4350 - 14200 psi | Average value: 72.2 MPa Grade Count:209 |
Overview of materials for Nylon 66, Unreinforced This property data is a summary of similar materials in the MatWeb database for the category "Nylon 66, Unreinforced". Each property range of values reported is minimum and maximum values of appropr.. |
|||
Tensile Strength, Yield | 30.0 MPa | 4350 psi | 50 mm/min; ISO 527-1,-2 |
Inno-Comp INNOPOL® CS 2-3000 Polypropylene Block-Copolymer INNOPOL® CS 2-3000 is a polypropylene block-copolymer compound. This grade is available in nature and custom colored form.INNOPOL® CS 2-3000 is developed for producing injection molded automot.. |
|||
Tensile Strength, Yield | 30.0 MPa | 4350 psi | ASTM D638 |
IRPC Polimaxx Polene 2100N Polypropylene Block Copolymer CHARACTERISTICS: MEDIUM FLOW, HIGH STIFFNESSAPPLICATIONS: INJECTION MOLDING FOR HOUSEWARES, ELECTRICAL PARTS, AUTOPARTS |
|||
Tensile Strength, Yield | 30.0 MPa | 4350 psi | Type I, 5 mm/min; ASTM D638 |
SABIC Innovative Plastics LNP STAT-KON AX01706 ABS LNP* STAT-KON* AX01706 is a compound based on ABS containing proprietary fillers. Added feature of this grade is: Electrically Conductive. |
|||
Tensile Strength, Yield | 30.0 MPa | 4350 psi | 50 mm/min; ASTM D638 |
Solvay Specialty Polymers Halar® 5001C Ethylene Chlorotrifluoroethylene Copolymer (ECTFE) Powder grades for masterbatches.Features: Low ViscosityUses: Masterbatch; Wire & Cable ApplicationsAdditional Properties: Crystallization Heat - ASTM D3418 40.0 J/g; Heat of Fusion - ASTM D3418 42.0.. |
|||
Tensile Strength, Yield | 30.0 MPa | 4350 psi | |
UBE UBEPOL BR15HB HIPS (n-DM =0.03 wt %) Description: UBEPOL-BR15HB is characterized by the highest branching of these 3 grades and is adapted by many PS manufacturers.Information provided by UBE. |
|||
Tensile Strength, Yield | 30.0 MPa | 4350 psi | ASTM D638 |
Tipco Tipcolene® FPC 20 HG - 20% Calcium Carbonate Reinforced, High Gloss Polypropylene Homopolymer 20% Calcium Carbonate Filled PP Homopolymer with High GlossApplications: Furniture & AppliancesProcessing: Injection MoldingInformation provided by the Manufacturer, Tipco Industries Ltd.,
India. |
|||
Tensile Strength, Yield | 30.0 MPa | 4350 psi | ISO 527-2 |
Total PPH 10099 Polypropylene, Homopolymer ATOFINA Polypropylene PPH 1099 is a controlled-rheology homopolymer having a very narrow molecular weight distribution. PPH 10099 is characterized by high fluidity for high speed spinning on spunla.. |
|||
Tensile Strength, Yield | 30.0 MPa | 4350 psi | ISO 527-2 |
Total PPH 6080 Polypropylene Homopolymer, Cast Film Polypropylene PPH 6080 is a homopolymer polypropylene with a Melt Flow index of 9 g/10 min for the cast extrusion of film with excellent optical properties and good sterilizability.Polypropylene PPH.. |
|||
Tensile Strength, Yield | 30.0 MPa | 4350 psi | GB/1040 |
Zhejiang Juner JEPPB005 High Glossy PP Applications: Shell of Air ConditionerInformation provided by Zhejiang Juner New Materials Co, Ltd. |
|||
Tensile Strength, Yield | 30.0 MPa | 4350 psi | ASTM D638 |
A. Schulman POLYFORT™ FXP 2600-3120 CaC02 Filled Homopolymer Polypropylene DescriptionPolyfort® FXP 2600-3120 is a 20% GAC02 filled homopolymer polypropylene compound.Information provided by A. Schulman. |
|||
Tensile Strength, Yield | 30.0 MPa | 4350 psi | ISO 527-2 |
Total PPC 13442 Polypropylene, Heterophasic Copolymer ATOFINA Propylene 13442 is a nucleated antistatic heterophasic copolymer. PPC 13442 is characterized by very high fluidity with good mechanical properties. It has been formulated for excellent ant.. |
|||
Tensile Strength, Yield | 30.0 MPa | 4350 psi | ASTM D638 |
Goodfellow TPX® DX845 Extrusion Grade Polymethylpentene This grade is highly recommended for film extrusion; also for injection molding, fiber extrusion and blow molding.TPX® is semi-crystalline, transparent, very light and - for a polyolefin - expensiv.. |
|||
Tensile Strength, Yield | 30.0 MPa | 4350 psi | dry; ISO 527-1/-2 |
EMS-Grivory Grivory® L 25 W 20 X PA12-I Product Description: Grilamid L 25 W 20 X is a semi-flexible plasticized high viscosity extrusion grade of Polyamide 12 (PA12). Grilamid L 25 W 20 X is impact modified and UV and heat stabilized. Th.. |
|||
Tensile Strength, Yield | 30.0 MPa | 4350 psi | |
Axion Polymers Axplas® PS04 0000 Mixed Polystyrene Granules with FR The PS04 series of clean, mixed polystyrene granular chips offers a low-cost option for manufacturers to add post-consumer, engineering polymers to a wide range of products. The polymer mix includes.. |
|||
Tensile Strength, Yield | 30.0 MPa | 4350 psi | 50 mm/min |
Arkema Group Rilsan® BMN P20 D Nylon 11 (Dry) Designation ISO 1874-PA11-P,MR,12-004Flexible grade for injection molding. Available colors: black and natural. Mold release agent.Outstanding working properties. Easy filling of the mold due to its.. |
|||
Tensile Strength, Yield | 30.0 MPa @Temperature 120 °C |
4350 psi @Temperature 248 °F |
ASTM Test |
BASF Ultramid® 8202C HS PA6 (Dry) Ultramid 8202C HS is a heat stabilized, low viscosity, PA6 injection molding homopolymer possessing a modified crystalline structure for increased property performance and faster cycles. It is also.. |
|||
Tensile Strength, Yield | 30.0 MPa | 4350 psi | ASTM D638 |
Aclo Accutech Polyethylene HD0234G10UVL High Density Glass Reinforced UV Stabilized |
|||
Tensile Strength, Yield | 30.0 MPa | 4350 psi | ASTM D638 |
Ineos Nova Zylar® 535 Clear Impact Modified Acrylic Copolymer
(discontinued **) Features: High clarity, strength and toughnessStyrenic processing advantagesExcellent property retention after ETO and gamma sterilizationAnti-stat packageEnhanced mold releaseUL 94HB @ 1.5 mm for a.. |
|||
Tensile Strength, Yield | 30.0 - 80.0 MPa | 4350 - 11600 psi | Average value: 58.1 MPa Grade Count:8 |
Overview of materials for Epoxy, Molded, Glass Fiber Filler This property data is a summary of similar materials in the MatWeb database for the category "Epoxy, Molded, Glass Fiber Filler". Each property range of values reported is minimum and maximum values.. |
|||
Tensile Strength, Yield | 30.0 MPa | 4350 psi | |
TSE Industries Millathane® E34 Millable Polyether Polyurethane Rubber with 2.0 PHR MBTS MILLATHANE E34 is a high performance polyether polyurethane rubber for applications requiring: high abrasion resistance, low temperature flexibility, ozone resistance, oil and fuel resistance, outst.. |
|||
Tensile Strength, Yield | 30.0 MPa | 4350 psi | ASTM D638 |
A. Schulman POLYFORT™ FPP 1068-32 Black40% Mineral Filled Polypropylene DescriptionPolyfort® FPP 1068-32 Black is a 40% mineral filled polypropylene designed for use when improved heat resistance, dimensional stability and high stiffness is needed. ApplicationApplicati.. |