Polymer Property : Tensile Strength, Ultimate = 480 MPa Product List

Mechanical Properties

Tips: 30 items are displayed at most.

Mechanical Properties	Metric	English	Comments
Tensile Strength, Ultimate	>= 480 MPa	>= 69600 psi
MetalTek MTEK 23-35WCo Heat Resistant Stainless Steel Information provided by MetalTekCast ASTM A297 MOD.
Tensile Strength, Ultimate	480 - 655 MPa	69600 - 95000 psi
MetalTek MTEK WC 9 Cast UNS J42045 Alloy Steel Information provided by MetalTek
Tensile Strength, Ultimate	480 - 655 MPa	69600 - 95000 psi
MetalTek WC 6 Cast UNS J24054 Alloy Steel General structural use.Applications: Cylinders, rolls, hollow shafts.Information provided by MetalTek
Tensile Strength, Ultimate	480 - 655 MPa	69600 - 95000 psi
MetalTek WCB UNS J13345 Cast Alloy Steel General structural use.Applications: Cylinders, rolls, hollow shafts.Information provided by MetalTek
Tensile Strength, Ultimate	>= 480 MPa	>= 69600 psi
H.C. Starck WCu 90/10 Tungsten-Copper Composite Material Description of Product: Tungsten-copper composite materials are produced by copper infiltration of porous sintered tungsten. They are available with different copper contents (10 - 30 %). A therm..
Tensile Strength, Ultimate	480 - 655 MPa	69600 - 95000 psi
MetalTek WCC Cast 105-85 Alloy Steel General structural use.Applications: Cylinders, rolls, hollow shafts.Information provided by MetalTek
Tensile Strength, Ultimate	480 MPa <br>@Temperature 550 Â°C	69600 psi <br>@Temperature 1020 Â°F	Annealed prior to test
Special Metals INCOLOYÂ® Alloy 800HTâ„¢ A nickel-iron-chromium alloy having the same basic composition as INCOLOY alloy 800 but with significantly higher creep-rupture strength. The higher strength results from close control of the carbo..
Tensile Strength, Ultimate	480 - 540 MPa	69600 - 78300 psi
SSAB Tunnplat Aluzink 380A YP High-strength Metal-coated Steel High-strength Metal-coated SteelComments: Aluzink YP - HSLA steel (aluminum-zinc coated sheet). Property values are for thicknesses 0.4 - 2.0 mm. Iron content is approximate - exact composition is ..
Tensile Strength, Ultimate	480 - 620 MPa	69600 - 89900 psi
SSAB Tunnplat DomexÂ® 420MC HSLA Steel HSLA SteelCharacteristics: Some thicknesses of these steel grades are available with a maximum of 0.03% Si for thin Zn coating. If the material is to be hot-dip galvanized and steel with a maximum ..
Tensile Strength, Ultimate	>= 480 MPa	>= 69600 psi
SSAB Tunnplat DomexÂ® 420XP Extra High-strength Cold-forming Steel Extra High-strength Cold-forming Steel, HSLACharacteristics: DomexÂ® is the brand name of hot rolled products from SSAB Tunnplat. DomexÂ® cold-forming steels are modern structural steels. Gene..
Tensile Strength, Ultimate	>= 480 MPa	>= 69600 psi
AK Steel ASTM A 1011, Class 2 Formable, Grade 55F Hot Rolled Carbon Steel, Medium/High Strength Low Alloy Steel (HSLA-F) Not listed in the ASTM.Information provided by AK Steel
Tensile Strength, Ultimate	>= 480 MPa	>= 69600 psi
AK Steel ASTM A 607 Class 1 Formable, Grade 55K Hot Rolled Carbon Steel, Medium/High Strength Low Alloy (HSLA) ASTM A 607 is for Hot Rolled and Cold Rolled grades. AK Steel produces Type 1 (columbium bearing only), Class 1 has limits placed on C, Mn, P and S with a 15 ksi difference between the minimum spec..
Tensile Strength, Ultimate	>= 480 MPa	>= 69600 psi
AK Steel ASTM A 607 Class 2 Formable, Grade 60K Hot Rolled Carbon Steel, Medium/High Strength Low Alloy (HSLA) ASTM A 607 is for Hot Rolled and Cold Rolled grades. AK Steel produces Type 1 (columbium bearing only), Class 2 limits only C and has a 10 ksi difference between the minimum specified YS and UTS. ..
Tensile Strength, Ultimate	>= 480 MPa	>= 69600 psi
AK Steel ASTM A 715 Class 2 Formable, Grade 60F Hot Rolled Carbon Steel, Medium/High Strength Low Alloy (HSLA) ASTM A 715 is for Hot Rolled and Cold Rolled grades. AK Steel produces Type 1 (columbium bearing only), Class 2 limits only C and has a 10 ksi difference between the minimum specified YS and UTS. ..
Tensile Strength, Ultimate	480 MPa <br>@Temperature 371 °C	69600 psi <br>@Temperature 700 °F	Plate
AK Steel NITRONIC® 30 Austenitic Stainless Steel AK Steel NITRONIC 30 Stainless Steel offers significantly higher strength than Type 304 and potential for applications requiring good resistance to aqueous and atmospheric corrosion resistance combi..
Tensile Strength, Ultimate	480 MPa	69600 psi
ATI Allegheny Ludlum AL 409 Cb™ Brazeable Ferritic Stainless Steel, 8.5% Cold Work AL 409 Cb™ is normally 12.5% chromium ferritic stainless steel with columbium stabilization and with restricted titanium and aluminum contents. As a result of these alloying adjustments, the braze..
Tensile Strength, Ultimate	>= 480 MPa	>= 69600 psi
AK Steel ASTM A 1011, Class 1 Formable, Grade 55K Hot Rolled Carbon Steel, Medium/High Strength Low Alloy Steel (HSLA) Information provided by AK Steel
Tensile Strength, Ultimate	>= 480 MPa	>= 69600 psi
AK Steel ASTM A 1011, Class 2 Formable, Grade 60K Hot Rolled Carbon Steel, Medium/High Strength Low Alloy Steel (HSLA) Information provided by AK Steel
Tensile Strength, Ultimate	>= 480 MPa	>= 69600 psi
AK Steel SAE J1392, Grade 55F Hot Rolled Carbon Steel, Medium/High Strength Low Alloy (HSLA) AK Steel Formable Grade - F indicates inclusion controlled low alloy.Information provided by AK Steel
Tensile Strength, Ultimate	480 MPa	69600 psi	As Cast
AFE Technologies Cronite 37Ni/18Cr/Nb No. HR32 High temperature nickel alloy castings. Applications include heat treatment and handling products, furnace products, tubes, power generation, and petrochemical industries.Information provided by AF..
Tensile Strength, Ultimate	480 MPa <br>@Temperature 704 °C	69600 psi <br>@Temperature 1300 °F
Haynes Hastelloy® N, 1.6 mm sheet, heat treated at 1175°C, rapid air cooled Applications include containers for molten fluoride salts. Good oxidation resistance to hot fluoride salts at 705-870°C (1300-1600°F), good oxidation resistance in air.Data provided by the manufac..
Tensile Strength, Ultimate	480 - 590 MPa	69600 - 85600 psi
Materion Beryllium Copper Alloy 3 Plate & Rolled Bar; H (TD04) Temper; up to 76 mm Thickness (UNS C17510) Treatment required for max strength: as suppliedTabulated properties apply to products after age hardening. Information supplied by Brush Wellman.Brush Engineered Materials Inc. changed its name to..