Thermal Properties | Metric | English | Comments |
---|---|---|---|
Melting Point | 220 °C | 428 °F | ASTM D789 |
NYCOA 589 PA 6 FDA approved molding, extrusion and blown film gradeInformation provided by NYCOA, Inc. |
|||
Melting Point | 220 °C | 428 °F | STN EN 11357-1 |
Plastcom PLASTAMID® 6 GF 30 002 TS PA6 reinforced with glass fiber, heat stabilized PA 6 for injection molding, reinforced with 30% glass fiber, heat stabilized. Decrease in tensile strength by 50 % after 5000 hours at 170°C. Used for holders of hand tools, hobby tools, gear wheel.. |
|||
Melting Point | 220 °C | 428 °F | DSC; STN EN ISO 3146 |
Plastcom SLOVAMID 6 FRB 4 Polyamide 6, Halogen Free Flame Retardant FeaturesPA 6 for injection moulding with increased flammability resistance. Halogen-free flame retardant. Intended for electrical purposes. Manufacturing of simple large scale products. Good flo.. |
|||
Melting Point | 220 °C | 428 °F | |
Plastcom SLOVAMID 6 FRM 2 PA6, flame retardant FeaturesDetermined for electrotechnical use. Delivered in natural mode. PA 6 for injection moulding with reduced flammability, with nonhalogen flame retardant. Excellent fluidity of the material pre.. |
|||
Melting Point | 220 °C | 428 °F | |
Plastcom SLOVAMID 6 GF 30 FRG 4 LW PA6, 30% glass fibre, flame retardant FeaturesPA 6 for injection moulding, chemically reinforced with 30% glass fibre, with nonhalogen flame retardant. Main features: flammability in accordance with UL 94 V0 at 1.6 mm, glow wire at 960°.. |
|||
Melting Point | 220 °C | 428 °F | |
Polikim KESTAMID® PA6G Polyamide 6 Kestamid® is also known as Cast Polyamide or Cast Nylon. Kestamid® is an engineering plastic used commonly in all industrial branches for its superior mechanical, physical, chemical and electrical.. |
|||
Melting Point | 220 °C | 428 °F | ISO 11357-1 |
Radici Radilon® S 35FL (dry) Nylon 6 Radilon® S (homopolyamides) are normally used in cast and blown extrusion for the production of packaging films. Radilon® S grades can be extruded to a thickness varying from 20 mm to 100 mm.Appl.. |
|||
Melting Point | 220 °C | 428 °F | (Dry) |
Radici Radilon® S LHS (cond.) Nylon 6 Radilon® S is a range of polyamide 6 (PA6) products obtained through the polymerization of caprolactam and used for injection, extrusion and blow-molding.Information provided by Radici group. |
|||
Melting Point | 220 °C | 428 °F | |
Radici Radilon® S RV500 (dry) Nylon 6 Radilon® S is a range of polyamide 6 (PA6) products obtained through the polymerization of caprolactam and used for injection, extrusion and blow-molding.Information provided by Radici group. |
|||
Melting Point | 220 °C | 428 °F | ASTM and ISO test |
BASF Capron® HPN 9233G 33% Glass-Filled Nylon 6 (Dry)
(discontinued **) Capron HPN 9233G is a 33% glass reinforced polyamide 6 injection molding compound combining exceptional strength, stiffness and high temperature performance with excellent surface aesthetics. It is.. |
|||
Melting Point | 220 °C | 428 °F | ISO 11357-1 |
Akro-Plastic Akromid® S31 (3484) PA 6.10 Conditioned
(discontinued **) A characteristic property of AKROMID® S (PA 6.10) is that it has a renewable-resource content of up to 70 % and therefore fulfils the current definition of a bioplastic. The plant-based raw materia.. |
|||
Melting Point | 220 °C | 428 °F | 10 K/min |
BASF Capron® B73QP Nylon 6 (DAM)
(discontinued **) Information provided by BASF Corporation.Capron® is no longer a part of the BASF standard line. The BASF nylon products have been consolidated in the Ultramid ® line. |
|||
Melting Point | 220 °C | 428 °F | (Dry) |
BASF Capron® 8202C HS Nylon 6 (Conditioned)
(discontinued **) Capron 8202C HS is a heat stabilized, low viscosity, polyamide 6 injection molding homopolymer possessing a modified crystalline structure for increased property performance and faster cycles. It i.. |
|||
Melting Point | 220 °C | 428 °F | 10°C/min; ISO 11357-1,-3 |
Gromax BTE25-DN00N1 Nylon 6 (Dry) Information provided by Gromax Enterprises Corp. |
|||
Melting Point | 220 °C | 428 °F | 10°C/min; ISO 11357-1,-3 |
Gromax BTE30-DN00N1 Nylon 6 (Conditioned) Information provided by Gromax Enterprises Corp. |
|||
Melting Point | 220 °C | 428 °F | 10°C/min; ISO 11357-1,-3 |
Gromax BBG30-AN00N1 Nylon 6, Flame Retardant (Dry) Information provided by Gromax Enterprises Corp. |
|||
Melting Point | 220 °C | 428 °F | 10°C/min; ISO 11357-1,-3 |
Gromax BTE70-DN001N1 Nylon 6 (Dry) Information provided by Gromax Enterprises Corp. |
|||
Melting Point | 220 °C | 428 °F | ISO 3146 |
Wellman Wellamid® 42LN2-NBK2 Nylon 6, General Purpose All information provided by Wellman Engineered Resins. |
|||
Melting Point | 220 - 225 °C | 428 - 437 °F | |
Zig Sheng Industrial ZISAMIDE® HP3207 Nylon 6 ZISAMIDE® HP3207 is a spinning grade Polyamide 6. Application: textile brightInformation provided by ZIG SHEN Industrial Co., LTD. |
|||
Melting Point | 220 °C | 428 °F | 10°C/min; ISO 11357-1/-3 |
DSM Akulon® K224-LG6 Nylon 6-30% Glass Reinforced (European and Asian Grade) (Dry) The Akulon® product portfolio is engineered for optimum performance to suit different processing techniques and end use markets. Akulon Nylon 6 is used for extrusion applications including barrier .. |
|||
Melting Point | 220 °C | 428 °F | 10°C/min; ISO 11357-1/-3 |
DSM Akulon® N24-G8 PA6-GF40 40% Glass Reinforced |
|||
Melting Point | 220 °C | 428 °F | ASTM Test |
BASF Ultramid® 8202 PA6 (Conditioned) Ultramid 8202 is a low viscosity, general purpose polyamide 6 injection molding homopolymer exhibiting excellent melt fluidity for filling thin sections. It is also available in heat stabilized (Ult.. |
|||
Melting Point | 220 °C | 428 °F | DIN 53765 |
BASF Ultramid® B3WGM 24 HP BK 23210 10/20% Glass/Mineral Filled PA6-1 (Conditioned) Description: 20% mineral-filled and 10% glass-fiber reinforced injection-molding grade with outstanding flowability for technical parts with medium rigidity and high dimensional stability, e.g. for.. |
|||
Melting Point | 220 - 225 °C | 428 - 437 °F | |
BASF Ultradur S 4090 G6 30% Glass Filled PBT Ultradur S 4090 G6 is a 30% glass reinforced PBT+ASA blend. It produces moldings with good surface finish, is resistant to chemicals and stress cracking, and has low shrinkage and warpage.Applicati.. |
|||
Melting Point | 220 - 225 °C | 428 - 437 °F | DSC; ISO 11357-3 |
BASF Ultradur® B 6550 LN PBT Description: High-viscosity grades for the extrusion of loose buffer tubes for optical fibers, semi-finished products for machining, profiles and pipes.Information provided by BASF |
|||
Melting Point | 220 °C | 428 °F | 10 K/min |
BASF Ultramid® B32 01 PA6 (Dry) Ultramid B32 01 is an intermediate viscosity, PA6 grade.It conforms to FDA requirements including, 21 CFR 177.1500,EU Directive 2002/72/EC, the German BfR recommendation "X Polyamide", 1.6.1998 or l.. |
|||
Melting Point | 220 °C | 428 °F | 10 K/min |
BASF Nypel® 2367G HS BK 15/25% Glass/Mineral Filled PA6 (Dry) Nypel 2367G HS BK-4 is a black pigmented, heat stabilized, 40% mineral and glass fiber reinforced injection molding compound based on recycled PA6 feedstocks. It possesses a balance of engineering .. |
|||
Melting Point | 220 - 225 °C | 428 - 437 °F | DSC; ISO 11357-3 |
BASF Ultradur® B 4300 GM42 20/10% Glass/Mineral Filled PBT Description: Is a PBT-HI, mixed glass-fiber-reinforced and mineral-reinforced injection-molding grade with good surface quality and rigidity, and with low warpage for parts such as housings and PCBs.. |
|||
Melting Point | 220 °C | 428 °F | DIN 53765 |
BASF Ultramid® B3M6 BK60564 30% Mineral Filled PA6 (Conditioned) Ultramid B3M6 BK60564 is a 30% mineral reinforced, pigmented black injection molding PA6 grade for industrial items requiring high impact strength and very high dimensional stability, excellent lase.. |
|||
Melting Point | 220 °C | 428 °F | ASTM D2133 |
E-Polymers TEKAMID® TB120GM40 , 40% GF/MF Reinforced PA6, DAM 40% GF/MF reinforced, Good surface, Low warpageInformation provided by E-Polymers Co. Ltd. |