- HOME
- POLYMER SEARCH
- Polymer Property : Glass Transition Temp, Tg = -40.0 °F
Polymer Property : Glass Transition Temp, Tg = -40.0 °F Product List
Thermal PropertiesTips: 30 items are displayed at most. For the rest of the results, please contact customer service.
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Glass Transition Temp, Tg | -40.0 °C | -40.0 °F | DSC |
| Solvay Specialty Polymers Solef® 5130 Polyvinylidene Fluoride (PVDF)
(Unverified Data**) Solef® 5130 PVDF has an ultra high viscosity ideal for its usage in lithium batteries.Additional Information: Intrinsic Viscosity: 0.27 - 0.37 l/gInformation provided by Solvay Specialty Polymers. |
|||
| Glass Transition Temp, Tg | -40.0 °C | -40.0 °F | ASTM D4065 |
| Solvay Specialty Polymers Solef® 6008 Polyvinylidene Fluoride (PVDF)
(Unverified Data**) Solef® 6008 PVDF homopolymer is a low-viscosity PVDF resin and is typically processed by injection molding.Information provided by Solvay Specialty Polymers. |
|||
| Glass Transition Temp, Tg | -40.0 °C | -40.0 °F | ASTM D4065 |
| Solvay Specialty Polymers Solef® 6010 Polyvinylidene Fluoride (PVDF)
(Unverified Data**) Solef® 6010 PVDF homopolymer has medium viscosity and is typically processed by extrusion.Information provided by Solvay Specialty Polymers. |
|||
| Glass Transition Temp, Tg | -40.0 °C | -40.0 °F | DMTA |
| Solvay Specialty Polymers Solef® 3208/0150 Anti-friction PVDF Compound
(discontinued **) Key features of this grade: Anti-friction, Formulated. Recommended processing is injection. Available as granules.General information about SOLEF® PVDF: SOLEF® PVDF is a fluorinated semi-crysta.. |
|||
| Glass Transition Temp, Tg | -40.0 °C | -40.0 °F | |
| Mallard Creek Polymers TYLAC® 873 Nitrile Emulsion Tylac® 873 is a carboxylated acrylonitrile-butadiene copolymer latex. Features: good resistance to oil, grease and solvent, compatible with anionic asphalt emulsions, broadens the temperature ran.. |
|||
| Glass Transition Temp, Tg | -40.0 °C | -40.0 °F | ASTM D1329 |
| Seals Eastern 5241 Neoprene / Chloroprene General purpose neopreneInformation provided by Seals Eastern, Inc. |
|||
| Glass Transition Temp, Tg | -40.0 °C | -40.0 °F | ASTM D1329 |
| Seals Eastern 7282 Neoprene / Chloroprene UL-flame resistant, non-blooming neopreneInformation provided by Seals Eastern, Inc. |
|||
| Glass Transition Temp, Tg | -40.0 °C | -40.0 °F | ASTM E1356 |
| Solvay Specialty Polymers Solef® 6008 Polyvinylidene Fluoride (PVDF) Solef® 6008 PVDF homopolymer is a low-viscosity PVDF resin and is typically processed by injection molding.Features: Homopolymer; Low ViscosityAdditional Properties: Crystallization Heat - ASTM D.. |
|||
| Glass Transition Temp, Tg | -40.0 °C | -40.0 °F | ASTM E1356 |
| Solvay Specialty Polymers Solef® 6010 Polyvinylidene Fluoride (PVDF) Solef® 6010 PVDF homopolymer has medium viscosity and is typically processed by extrusion.Features: Homopolymer; Medium ViscosityAdditional Properties: Crystallization Heat - ASTM D3417 54.0 to 6.. |
|||
| Glass Transition Temp, Tg | -40.0 °C | -40.0 °F | ASTM E1356 |
| Solvay Specialty Polymers Solef® 6012 Polyvinylidene Fluoride (PVDF) Solef® 6012 PVDF homopolymer is a high-viscosity PVDF resin and is typically processed by extrusion or compression molding.Features: High Viscosity; HomopolymerAdditional Properties: Crystallizat.. |
|||
| Glass Transition Temp, Tg | -40.0 °C | -40.0 °F | ASTM E1356 |
| Solvay Specialty Polymers Solef® 9007 Polyvinylidene Fluoride (PVDF) Solef® 9007 PVDF homopolymer has low viscosity and is used in film extrusion and injection molding.Features: Homopolymer; Low ViscosityAdditional Properties: Crystallization Heat - ASTM D3418 53... |
|||
| Glass Transition Temp, Tg | -40.0 °C | -40.0 °F | |
| Solvay SIPOMER® PAM-300 Phosphate Esters of Ppg Monoacrylate Description: Sipomer PAM-200 incorporated into acrylic resin systems improves adhesion to metallic substrates and glass. Due to its versatile compatibility characteristics with various common solven.. |
|||
| Glass Transition Temp, Tg | -40.0 °C | -40.0 °F | ASTM D3418 |
| Wanhua Chemical Wanthane® WHT-1180 Polyester Based TPU Excellent mechanical properties, high abrasion resistance, tear resistance, short cycle timeInformation provided by Wanhua Chemical Group Co., Ltd. |
|||
| Glass Transition Temp, Tg | -40.0 °C | -40.0 °F | |
| Wanhua Chemical Wanthane® WHT-8195 Polyether-Based TPU Excellent hydrolytic stability, fungus resistance, low temperature flexibility & UV resistanceInformation provided by Wanhua Chemical Group Co., Ltd. |
|||
| Glass Transition Temp, Tg | -40.0 °C | -40.0 °F | |
| Wanhua Chemical Wanthane® WHT-A890 Aliphatic TPU Non-yellowish, high tensile strength, good abrasion resistance, excellent hydrolytic stability, fungus resistance, low temperature flexibilityInformation provided by Wanhua Chemical Group Co., Ltd. |
|||
| Glass Transition Temp, Tg | -40.0 °C | -40.0 °F | DSC |
| Lubrizol ESTANE® 58130 Ester Based Thermoplastic Polyurethane Features: Fast cycling, broad temperature performance, and durabilityUse: Injection Molding.Available in Americas, Europe, Middle East, Africa, India and AsiaInformation provided by Lubrizol |
|||
| Glass Transition Temp, Tg | -40.0 °C | -40.0 °F | |
| Lubrizol Estane® 2102-80A Thermoplastic Polyurethane Elastomer Formerly PellethaneFeature: Low compression setAvailable in Americas, Europe, Middle East, Africa, India and AsiaData provided by LubrizolLubrizol acquired the Pellethane product line from Dow in 20.. |
|||
| Glass Transition Temp, Tg | -40.0 °C | -40.0 °F | DSC |
| Lubrizol Estane® 58144 Thermoplastic Polyurethane Type: Estane® 58144 is a 65D Polyether-type thermoplastic polyurethane (TPU) compound.Features: FDA (contact Lubrizol for details). Pre-drying: 2 hours at 104C (220F) in Dehumidifying Hopper Dryer.. |
|||
| Glass Transition Temp, Tg | -40.0 °C | -40.0 °F | 10°C/min |
| Covestro Texin® 945U Urethane Thermoplastic Elastomer Key Features:UnfilledU.V. stabilized or stable to weatherSuitable processing methods:Injection moldingProfile extrusionSheet extrusionInformation provided by Bayer Polymers.As of 1 September 2015, B.. |
|||
| Glass Transition Temp, Tg | -40.0 °C | -40.0 °F | |
| 3M Dyneon™ LTFE 6400Z Low Temperature Fluoroelastomer 3M™ Dyneon™ Low Temperature Fluoroelastomers LTFE 6400Z are technically advanced low temperature, peroxide-cured fluoroelastomers, designated as a FKM type 3 elastomer per ASTM D1418. They are des.. |
|||
| Glass Transition Temp, Tg | -40.0 - -38.0 °C @Frequency 1.00 Hz |
-40.0 - -36.4 °F @Frequency 1.00 Hz |
DMA |
| Arkema Group KYNAR FLEX® 2850-02 Polyvinylidene Fluoride Copolymer - Extrusion Characteristics: Natural resin - translucent, off-white hemispheres. 150°C Temperature rating. High stability in harsh thermal, chemical and ultraviolet environments. High toughness and mechani.. |
|||
| Glass Transition Temp, Tg | -40.0 - -38.0 °C @Frequency 1.00 Hz |
-40.0 - -36.4 °F @Frequency 1.00 Hz |
DMA |
| Arkema Group KYNAR® 740 Polyvinylidene Fluoride Homopolymer - Injection Molding and Extrusion Characteristics: Natural resin - translucent, off-white hemispheres. High stability in harsh thermal, chemical and ultraviolet environments. High toughness and mechanical strength, low permeabili.. |
|||
| Glass Transition Temp, Tg | -40.0 - -38.0 °C @Frequency 1.00 Hz |
-40.0 - -36.4 °F @Frequency 1.00 Hz |
DMA |
| Arkema Group KYNAR® 460 Polyvinylidene Fluoride Homopolymer - Extrusion Characteristics: Natural resin - translucent, off-white hemispheres. Broad molecular weight distribution. High stability in harsh thermal, chemical and ultraviolet environments. High toughness a.. |
|||
| Glass Transition Temp, Tg | -40.0 - -38.0 °C @Frequency 1.00 Hz |
-40.0 - -36.4 °F @Frequency 1.00 Hz |
DMA |
| Arkema Group KYNAR® 460 Red Polyvinylidene Fluoride Homopolymer - Injection Molding and Extrusion Characteristics: Broad molecular weight distribution, pigmented. High stability in harsh thermal, chemical and ultraviolet environments. High toughness and mechanical strength, low permeability, .. |
|||
| Glass Transition Temp, Tg | -40.0 °C | -40.0 °F | ASTM D4065 |
| Solvay Specialty Polymers Solef® 6020 Polyvinylidene Fluoride (PVDF)
(Unverified Data**) Solef® 6020 PVDF homopolymer has very high viscosity for membranes and lithium batteries. It is available exclusively as powder.Information provided by Solvay Specialty Polymers. |
|||
| Glass Transition Temp, Tg | -40.0 °C | -40.0 °F | ASTM D4065 |
| Solvay Specialty Polymers Solef® 60512 Polyvinylidene Fluoride (PVDF)
(Unverified Data**) Solef® 60512 PVDF copolymer has high viscosity of the melt and it is a grade for offshore piping.Information provided by Solvay Specialty Polymers. |
|||
| Glass Transition Temp, Tg | -40.0 °C | -40.0 °F | 10°C/min |
| Arkema Group Kynar® 6000 HDC N 119 PVDF
(discontinued **) Designation ISO 12086-PVDF-E,GG1Z,Q.6E5.J.A.I.D, CD,Kynar PVDF are fluorinated thermoplastic homopolymers.Outstanding characteristics of Kynar: chemical resistance, imperviousness to UV, high barrie.. |
|||
| Glass Transition Temp, Tg | -40.0 °C | -40.0 °F | Pellet sample |
| BASF Elastollan® 1185A10Y Wire & Cable Grade Polyurethane Elastomer Compliant with NSF Standard 61 (Drinking water contact). As with all TPU products this grade must be dried prior to processing.Information provided by BASF Corporation. |
|||
| Glass Transition Temp, Tg | -40.0 °C | -40.0 °F | DSC |
| Lubrizol ESTANE® 58215 Ether Based Thermoplastic Polyurethane Features: Excellent physical properties, hydrolysis resistance and improved temperature resistance. Wide processing window for extrusion.Uses: Blown and flat die/cast film extrusion, Injection and b.. |
|||
| Glass Transition Temp, Tg | -40.0 - -38.0 °C @Frequency 1.00 Hz |
-40.0 - -36.4 °F @Frequency 1.00 Hz |
DMA |
| Arkema Group KYNAR FLEX® 2850-00 Polyvinylidene Fluoride Copolymer - Extrusion & Molding Characteristics: Natural resin - translucent, off-white hemispheres. 150°C Temperature rating. High stability in harsh thermal, chemical and ultraviolet environments. High toughness and mechani.. |
|||
Copyright © lookpolymers.com All Rights Reserved