- HOME
- POLYMER SEARCH
- Polymer Property : Maximum Service Temperature, Air = 100 °C
Polymer Property : Maximum Service Temperature, Air = 100 °C Product List
Thermal PropertiesTips: 30 items are displayed at most.
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 100 °C | 212 °F | Recommended |
|
Nye Lubricants 123S (Nyeoil2) Oil
Information provided by Nye Lubricants.
|
|||
| Maximum Service Temperature, Air | 100 °C | 212 °F | ISO.75 DN.53461 |
|
Polimersan Plastics POLIPOM® (POM)
POLIPOM® is a plastic which is manufactured by the polymerization of formaldehyde. Its high proportional crystallized structure of the oxygen and methyl groups inside, provides it high proportional..
|
|||
| Maximum Service Temperature, Air | 100 °C | 212 °F | |
|
Parker Chomerics CHO-BOND 4669 Conductive Caulk/Sealant
Chomerics two-component conductive epoxy caulks provide excellent adhesion to dissimilar substrates and can be used in lap or butt joint applications. They feature large silver-plated-copper particl..
|
|||
| Maximum Service Temperature, Air | 100 °C | 212 °F | |
|
Parker Chomerics Tecknit Teckshield®-F 100 OPI 0.001" Diameter Wire, Allycarbonate EMI Shielding Window
Description: Tecknit Allylcarbonate shielded windows are manufactured by casting a woven EMI shield mesh into a material that has optical properties similar to that of glass. The window offers a lig..
|
|||
| Maximum Service Temperature, Air | 100 °C | 212 °F | Maximum Operating Temperature |
|
Piezo Kinetics 906 Lead Nickel Niobate Piezoelectric
PKI 906 is slightly different in composition than the "general" PZT formulations. Its PZT-doped Lead Nickel Niobate composition was developed to enhance the d33 and dielectric properties of Navy Typ..
|
|||
| Maximum Service Temperature, Air | 100 °C | 212 °F | |
|
Lehmann & Voss LUVOCOM® 80/TF/18/NT Polyacetal-copolymer, with PTFE
Applications: Automotive industry, textile- and office machinery, apparatus- and precision engineering.Improved friction and wear behaviour. Emergency running property.Emergency running property, gl..
|
|||
| Maximum Service Temperature, Air | 100 °C | 212 °F | |
|
Lehmann & Voss LUVOCOM® 80-8470 Polyacetal-copolymer, unreinforced
Applications: Automotive industry, textile- and office machinery, apparatus- and precision engineering.Isotropic shrinkage characteristics.Strong, stiff parts.Impact resistance.Control disks, cams, ..
|
|||
| Maximum Service Temperature, Air | 100 °C | 212 °F | short term |
|
Lehmann & Voss LUVOCOM® 94-8485 LD-PE, unreinforced
Applications: Automotive industry, textile- and office machinery, apparatus- and precision engineering.Reduced moment of inertia compared with metal parts.Dynamic stressed parts.Especially suitable ..
|
|||
| Maximum Service Temperature, Air | 100 - 120 °C | 212 - 248 °F | Long Term |
|
Kolon Kocetal® K700 General Purpose Grade Acetal Copolymer
Thermal properties: Kocetal has excellent heat stability; heat degradation is little under long term and high temperature application, compared to other POM. Maximum applicable temperature of produ..
|
|||
| Maximum Service Temperature, Air | 100 °C | 212 °F | Continuous |
|
Global EPP PA 6C Cast Polyamide 6
Cast nylons are generally accepted as the primary engineering polymer, suitable for virtually any plain bearing application. By varying the conditions of polymerisation the mechanical properties of ..
|
|||
| Maximum Service Temperature, Air | 100 °C | 212 °F | 20,000 hours; 50% Tensile Strength; IEC 216; DIN 53446 |
|
Zell-Metall Engineering Plastics Zellamid 900 (POM-C)
Zellamid® 900 is the registered trademark of Zell-Metall’s high molecular weight Acetal resin.Acetal (POM) is noted for it’s high mechanical strength, heat resistance and good antifriction ..
|
|||
| Maximum Service Temperature, Air | 100 °C | 212 °F | |
|
Tra-Con Tra-Bond 2111 Rigid Epoxy Staking Compound
TRA-BOND 2111 is a thixotropic epoxy resin and hardener formulation developed for industrial adhesive, staking, laminating, repair and manufacturing applications where long pot-life, good wetting, n..
|
|||
| Maximum Service Temperature, Air | 100 °C | 212 °F | |
|
Zotefoams Plastazote® LD24FR Low Density Polyethylene Foam, Flame Retardant
Plastazote® is a closed cell, cross-linked polyethylene foam manufactured using nitrogen expansion technology to produce foams with exceptional cell size uniformity, low odor / high purity and outs..
|
|||
| Maximum Service Temperature, Air | 100 °C | 212 °F | |
|
Zotefoams Plastazote® LD29 Low Density Polyethylene Foam
Plastazote® is a closed cell, cross-linked polyethylene foam manufactured using nitrogen expansion technology to produce foams with exceptional cell size uniformity, low odor / high purity and outs..
|
|||
| Maximum Service Temperature, Air | 100 °C | 212 °F | long term; EMS |
|
EMS-Grivory Grivory® 1SVX-65H nat PA1010-GF65
Product Description: Grilamid 1SVX-65H natural is a 65% glass fiber reinforced Polyamide 1010 injection molding grade with the following product profile: Raw materials based on renewable resources E..
|
|||
| Maximum Service Temperature, Air | 100 - 120 °C | 212 - 248 °F | long term; EMS |
|
EMS-Grivory Grivory® TSM-30/2 PA666-MD30
Product description: Grilon TSM-30/2 is a heat stabilized, normal viscosity PA66 + PA6 injection molding grade with 30% mineral filler. Grilon TSM-30/2 has the following important properties: Excell..
|
|||
| Maximum Service Temperature, Air | 100 °C | 212 °F | 20000 h; VDE 0304/P2-1, IEC 216 |
|
EPICHEM Epinyl PA 66 GF 30 Polyamide 66, 30% Glass
Characteristics: 30% glass fibre filled
|
|||
| Maximum Service Temperature, Air | 100 °C | 212 °F | Continuous use |
|
Hippe PE 1000 Polyethylene
Tough, flexible and stiff, depending on the crystalline structure (density). Resinous surface. Excellent dielectric properties, Good resistance against solvents, acids and alkalis. Physiologicall..
|
|||
| Maximum Service Temperature, Air | 100 °C | 212 °F | Deflection Temp at unknown load |
|
Abatron AboCast 8103-21 High-Performance Dielectric Epoxy
AboCast 8103-21 is a dielectric in/outdoor epoxy system with superior arc-track resistance, high voltage and heat resistance, low ash and ion content, and it is chlorine-free. This system combines r..
|
|||
| Maximum Service Temperature, Air | 100 °C | 212 °F | |
|
Azoty Tarnow™ TARNOFORM 300 SI POM
Tribological modified grade with silicon, for better sliding properties in plastic-plastic contact.Information provided by Zakłady Azotowe w Tarnowie-Moscicach S.A.
|
|||
| Maximum Service Temperature, Air | 100 °C | 212 °F | |
|
Azoty Tarnow™ TARNOFORM 400 POM
Easy flowing, fast cycling injection molding grade for manufacturing of thin-wall detailsInformation provided by Zakłady Azotowe w Tarnowie-Moscicach S.A.
|
|||
| Maximum Service Temperature, Air | 100 °C | 212 °F | Dry |
|
3M Scotchkote™ GP 830 WB Epoxy Primer
3M Scotchkote WB Epoxy Primer GP 830 is a member of a range of Scotchkote waterborne coatings and has been specifically developed as a primer/tie coat for use on sealed mineral surfaces and existing..
|
|||
| Maximum Service Temperature, Air | 100 °C | 212 °F | |
|
BASF Ultraform® W2320 0035 POM
Description: Is a POM, very free-flowing and rapidly solidifying grade for high processing demands.Information provided by BASF
|
|||
| Maximum Service Temperature, Air | 100 °C | 212 °F | continuous |
|
CENTROPLAST CENTRODAL MD Polyoxymethylene, Magnetically Detectable
During the modification with POM MD, metal fillings are added to the basic polyoxymethylene, which allows the plastic to be detectable. The excellent machinability, tenacity and dimensional stabilit..
|
|||
| Maximum Service Temperature, Air | 100 °C | 212 °F | Long Term |
|
CENTROPLAST CENTROLEN PPS Polypropylene flame resistant
This material is a low density, easily machined plastic that can be welded and is flame resistant. Applications include exhaust systems for heating systems, and apparatus engineering.Information pr..
|
|||
| Maximum Service Temperature, Air | 100 °C | 212 °F | |
|
BASF Ultraform S 1320 0021 UNC POM
Ultraform S1320 0021 UNC is an easy flowing, rapidly freezing injection molding POM grade with enhanced stiffness and heat distortion resistance. It is highly stabilized to resist aggressive fuels,..
|
|||
| Maximum Service Temperature, Air | 100 °C | 212 °F | |
|
BASF Ultraform® N2650 Z6 POM + PUR
Description: Elastomer-modified injection molding grade for applications requiring highest impact strength together with low stiffness.Information provided by BASF
|
|||
| Maximum Service Temperature, Air | 100 °C | 212 °F | |
|
BASF Ultraform® N2644 Z9 POM + PUR
Description: Elastomer modified injection molding grade for applications requiring low modulus. Good acoustic damping.Information provided by BASF
|
|||
| Maximum Service Temperature, Air | 100 °C | 212 °F | |
|
BASF Ultraform® W2320 0035 LEV POM
Description: Is a POM, very free-flowing, rapidly solidifying grade for injection molding, with reduced emission potential.Information provided by BASF
|
|||
Copyright © lookpolymers.com All Rights Reserved