Polymer Property : Dielectric Strength = 457 kV/in Product List

Electrical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Electrical Properties	Metric	English	Comments
Dielectric Strength	18.0 kV/mm	457 kV/in	50% RH; IEC 60243-1
Murtfeldt Murylon® A Nylon 66 This material combines the excellent properties of the Murylon® range with additional high tensile and compressive strength, increased wear resistance, and a lower level of moisture absorption than..
Dielectric Strength	18.0 kV/mm	457 kV/in
Pyrotek TS-111 Thermoset Electrical Insulation Product (Nema Grade: G-11) Glass reinforcement, Epoxy Resin, Natural Color. Good electrical and mechanical properties.ApplicationsSuperstructure support pads Bus bar insulators Pot cradle insulators Exhaust duct insulators M..
Dielectric Strength	18.0 kV/mm @Thickness 3.20 mm	457 kV/in @Thickness 0.126 in	in oil; IEC 60243-1
SABIC Innovative Plastics Lexan® EXL6414 PC (Europe-Africa-Middle East) PC-Siloxane copolymer with excellent processability. Impact modified, medium flow, extreme low temp. ductility.This data was supplied by SABIC-IP for the Europe-Africa-Middle East region.
Dielectric Strength	18.0 kV/mm	457 kV/in
Aremco Aremco-Bond™ 855 Epoxy Adhesive (discontinued **) High performance epoxy for specialty bonding and potting applications to 350ºF (175°C). Can be applied to a myriad of substrates, offering exceptional chemical, electrical, and mechanical properti..
Dielectric Strength	18.0 - 41.0 kV/mm	457 - 1040 kV/in	Average value: 32.1 kV/mm Grade Count:36
Overview of materials for Acrylonitrile Butadiene Styrene (ABS), Heat Resistant, Molded This property data is a summary of similar materials in the MatWeb database for the category "Acrylonitrile Butadiene Styrene (ABS), Heat Resistant, Molded". Each property range of values reported i..
Dielectric Strength	18.0 kV/mm	457 kV/in	ASTM D149
Chevron Phillips Ryton® R-7 Polyphenylene Sulfide Compound (discontinued **) Natural Color Polyphenylene Sulfide CompoundRyton® R-7 is polyphenylene sulfide compounded with glass fibers and mineral fibers to produce an injection moldable high temperature engineering compoun..
Dielectric Strength	18.0 kV/mm	457 kV/in	JIS-K-6249; ASTM D-149
Fujipoly Industries SarconÂ® GR-c Gap Filler Pad Sarcon GR-c is a highly conformable, thermally conductive (no electric conductive) and electromagnetic wave absorption material in areas where space between surfaces is uneven and surface textures v..
Dielectric Strength	18.0 kV/mm	457 kV/in	70Â°C for 1,000 hrs; JIS-K-6249
Fujipoly Industries SarconÂ® GR-n Gap Filler Pad Sarcon GR-n is a highly formable, thermally conductive gel material (no electicity conductive) in a versatile sheet form that easily fits and adheres to most all shapes and sizes of components, and ..
Dielectric Strength	18.0 kV/mm	457 kV/in	JIS-K-6249; ASTM D-149
Fujipoly Industries SarconÂ® XR-e Gap Filler Pad Sarcon XR-e and XR-j are highly conformable/thermally conductive gel material (no electicity conductive) in a versatile sheet form that easily fits and adheres to most all shapes and sizes of compon..
Dielectric Strength	18.0 kV/mm	457 kV/in	IEC 60243-1
Mitsubishi XantarÂ® MX 1021 FD MX 1021 Polycarbonate XantarÂ® materials are engineered for performance, consistency and reliability. This makes XantarÂ® resins ideal for interior automotive components, electrical equipment and consumer appliances ..
Dielectric Strength	18.0 - 50.0 kV/mm	457 - 1270 kV/in	DIN 53481
Isoflon PVDF Polyvinylidene fluoride Electrical and thermal insulating products with food slipping propertiesChemically inertInformation provided by Isoflon.
Dielectric Strength	18.0 kV/mm	457 kV/in	IEC 60243
Solvay TECHNYLÂ® C 502XT PA6, Conditioned Description: Unreinforced polyamide 6, very high viscosity, for extrusion.Available in: Europe Product Applications: It is suitable for extruded semi-finished products, such as: Rods, profiles, shee..
Dielectric Strength	18.0 kV/mm @Thickness 3.20 mm	457 kV/in @Thickness 0.126 in	in oil; IEC 60243-1
SABIC Innovative Plastics NORYL GFN1V PPE+HIPS (Europe-Africa-Middle East) NORYL GFN1V is a 10 % glass fibre reinforced material with a HDT/A of 110C according ISO 75. NORYL GFN1V cust spec 1977 has been approved for potable water applications up to 85C by the UK WFBS acco..
Dielectric Strength	18.0 kV/mm @Thickness 3.20 mm	457 kV/in @Thickness 0.126 in	in oil; IEC 60243-1
SABIC Innovative Plastics NORYL CTI2550 PPE+HIPS (Europe-Africa-Middle East) NORYL CTI2550 is a glass/mineral filled material with a Vicat B/120 of 160 Â°C according ISO 306.
Dielectric Strength	18.0 kV/mm @Thickness 3.20 mm	457 kV/in @Thickness 0.126 in	in oil; IEC 60243-1
SABIC Innovative Plastics NORYL GFN1520V PPE+HIPS NORYL GFN1520V is a 20% glass fibre reinforced material with improved hydrolytic stability. This grade has been certified for potable water applications up to 85C in Europe and North America, color ..
Dielectric Strength	18.0 kV/mm	457 kV/in	IEC 60250
Polyram RamLloy PN300G6 PPE/PS Alloy, 30% Glass Fiber PPE/PS alloy, 30% glass fiber reinforced for injection molding applications.Information provided by Polyram.
Dielectric Strength	18.0 kV/mm	457 kV/in	Full-wave Impulse; ASTM D3426
DuPont™ Nomex® 411 Paper, 5 mil Nominal Thickness Nomex® Type 411 is the uncalendared precursor of Type 410. It has a lower density and lower property values. It is used in applications such as motor phase insulation and transformer coil end fil..
Dielectric Strength	18.0 kV/mm	457 kV/in	IEC 60243-1
DuPont Performance Polymers Hytrel® 4053FG NC010 Polyester Elastomer TPC-ET (Unverified Data**) 40 Shore D High Performance Polyester Elastomer Developed for Food Contact ApplicationsInformation provided by DuPont Performance Polymers
Dielectric Strength	18.0 kV/mm	457 kV/in	ASTM D149
Ashley Polymers Ashlene® 527LDS Nylon 66 A very high impact, slightly lubricated and heat stabilized nylon resin.Data provided by the manufacturer
Dielectric Strength	18.0 kV/mm	457 kV/in	in transformer oil; IEC 60243-1
CENTROPLAST CENTROPHEN GF Polyphenylene ether 30% glass fiber This material is a lightweight plastic with low moisture absorption, and is impact resistant at low temperatures. Applications include electronic housings, valve pistons, and support rollers.Inform..
Dielectric Strength	18.0 kV/mm	457 kV/in	ASTM D149
Chem Polymer Durlex 730 GVH PBT, 30% Glass Fiber Reinforced A glass fiber reinforced, flame retardant PBT exhibiting excellent strength, dimensional stability and elevated temperature performance. The material has a V0 flammability rating according to UL94 ..
Dielectric Strength	18.0 kV/mm @Thickness 3.20 mm	457 kV/in @Thickness 0.126 in	in oil; IEC 60243-1
SABIC Innovative Plastics NORYL GFN1520V PPE+HIPS (Asia Pacific) NORYL GFN1520V is a 20% glass fibre reinforced material with improved hydrolytic stability. This grade has been certified for potable water applications up to 85C in Europe and North America, color ..
Dielectric Strength	18.0 kV/mm	457 kV/in	VDE 0303
GEHR Plastics PPE-30GF Polyphenylene Ether, 30% Glass Fiber (discontinued **) The 30% glass fiber reinforced PPE has an improved dimensional stability, a very high stiffness and heat resistance that allows further uses.