- HOME
- POLYMER SEARCH
- Thermoset
- Epoxy
- Epoxy Adhesive
- Devcon Carbide Putty Epoxy
Devcon Carbide Putty Epoxy
| Category | Polymer , Adhesive , Thermoset , Epoxy , Epoxy Adhesive |
| Manufacturer | Devcon |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Devcon Carbide Putty Epoxy.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Abrasion-Resistant SystemComments: PuttyData provided by Ellsworth Adhesives.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.74 g/cc | 0.0629 lb/in³ |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 85 | 85 | ASTM D2240 |
| Tensile Strength, Ultimate | 18.2 MPa | 2640 psi | ASTM D638 |
| Modulus of Elasticity | 5.52 GPa | 800 ksi | In Tension; ASTM D638 |
| Flexural Yield Strength | 37.8 MPa | 5480 psi | ASTM D790 |
| Compressive Yield Strength | 56.3 MPa | 8160 psi | ASTM D695 |
| Adhesive Bond Strength | 9.31 MPa | 1350 psi | Adhesive tensile shear strength; ASTM D1002 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 25.0 µm/m-°C @Temperature 20.0 °C |
13.9 µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
| Thermal Conductivity | 0.523 W/m-K | 3.62 BTU-in/hr-ft²-°F | ASTM C177 |
| Maximum Service Temperature, Air | 121 °C | 250 °F | Operating Temperature |
| Shrinkage | 0.090 % | 0.090 % | During Cure; ASTM D2566 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Dielectric Constant | 25 | 25 | ASTM D150 |
| Dielectric Strength | 7.87 kV/mm | 200 kV/in | ASTM D149 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Processing Temperature | 21.1 °C | 70.0 °F | |
| Pot Life | 50.0 min @Temperature 23.9 °C |
50.0 min @Temperature 75.0 °F |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Coverage per lb. | 64 in² | at 1/4 inch thick |
| Mix Ratio by Volume | 4 to 1 | resin:hardener |
| Mix Ratio By Weight | 8 to 1 | resin:hardener |
Users viewing this material also viewed the following:
- SABIC Innovative Plastics ULTEM 8015 PEI
- Chase Plastics CP Pryme® PC110R Polycarbonate, 10% Glass Fiber Reinforced
- A. Schulman CP810-01 Natural Linear, Low-Density Polyethylene
- Total PSI 825 Polystyrene
- ExxonMobil LDPE LD 103.59 Low Density Polyethylene Resin
- Abatron AboCast/AboCure 8109-8
- World Minerals Celite® Super Floss® E Diatomaceous Earth Antiblock Additive
- Arkema Group Lacovyl® GA 7701 H Vinyl Copolymer
- HP Alloys Alloy 718, 30% Cold Worked
- Techmer ES HiFill FR® PBT FR-S
Copyright © lookpolymers.com All Rights Reserved