POLYMER SEARCH

KratonÂ® D1101 E (SBS) Liner Block Copolymer

Category	Polymer , Thermoplastic , Styrene-Butadiene , Styrene/Butadiene/Styrene (SBS)
Manufacturer	Kraton
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	KratonÂ® D1101 E (SBS) Liner Block Copolymer.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Description: Kraton D1101 E polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied from Europe in the physical forms identified as follows in the grade nomenclature:D1101 ET - supplied as porous pellets dusted with talcD1101 ES - supplied as porous pellets dusted with amorphous silicaD1101 ESM - supplied as powder dusted with amorphous silicaRegion: Asia Pacific, Europe, Japan, North America and South AmericaUses: Kraton D1101 E polymer is used as a modifier of bitumen in roofing felt compounds, roads and pipe coating. It may also be suitable for use in formulating adhesives, sealants and coatings and in the modification of polymers.Applications: Bitumen Modification; Adhesives, Sealant and Coatings; Compounding and Personal Hygiene; Footwear; Impact Modification; Medical; Packaging and Polymod; Personal Care; and Roads and RoofingInformation provided by KratonÂ®

Physical Properties	Metric	English	Comments
Specific Gravity	0.940 g/cc	0.940 g/cc	ISO 2781
Bulk Density	0.400 g/cc	0.0145 lb/inÂ³	ASTM D 1895 method B
Volatiles	<= 0.30 %	<= 0.30 %	KM 04
Viscosity	3000 - 5000 cP	3000 - 5000 cP	25% Toluene Solution; KM 06
Melt Flow	<= 1.0 g/10 min @Load 5.00 kg, Temperature 200 Â°C	<= 1.0 g/10 min @Load 11.0 lb, Temperature 392 Â°F	ISO 1133
Ash	0.15 - 0.40 %	0.15 - 0.40 %	ET; ISO 247
	0.15 - 0.40 %	0.15 - 0.40 %	ES; ISO 247
	2.5 - 5.0 %	2.5 - 5.0 %	ESM; ISO 247

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	72 @Time 10.0 sec	72 @Time 0.00278 hour	Measure on compression molded slabs; ISO 868
Tensile Strength	33.0 MPa	4790 psi	measured on films cast from a solution in toluene; ISO 37
Elongation at Break	880 %	880 %	Measured on films cast from a solution in toluene; ISO 37
300% Modulus	0.00290 GPa	0.421 ksi	measured on films cast from a solution in toluene; ISO 37

Descriptive Properties	Value	Comments
Content	Antioxidants	0.15-0.4%, KM 08
	Polystyrene	30-32%, KM 03
	Total Extractables	<1.0%, KM 05

Users viewing this material also viewed the following: