PolyOne OnFlex™ S HS 70A-3E2543 Thermoplastic Elastomer (TPE)

Category	Polymer , Thermoplastic , Elastomer, TPE
Manufacturer	PolyOne Corporation
Trade Name	OnFlex™
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	PolyOne OnFlex™ S HS 70A-3E2543 Thermoplastic Elastomer (TPE).pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

This OnFlex™-S HS thermoplastic elastomer compounds is based on hydrogenated styrenic block copolymers. This range of compounds are formulated to deliver high strength and medium-low density in addition to typical OnFlex™-S properties such as a wide hardness range, good mechanical properties, good processability, good colourability and a wide temperature operating range.Properties are measured using injection molded plaques.Information provided by PolyOne

Physical Properties	Metric	English	Comments
Density	1.00 g/cc	0.0361 lb/in³	ISO 1183

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	70	70	ISO 868
Tensile Strength at Break	7.20 MPa @Thickness 2.00 mm	1040 psi @Thickness 0.0787 in	Flow Injection molded; ISO 37
	10.9 MPa @Thickness 2.00 mm	1580 psi @Thickness 0.0787 in	FlowExtruded; ISO 37
	11.1 MPa @Thickness 2.00 mm	1610 psi @Thickness 0.0787 in	Across Flow Injection molded; ISO 37
Elongation at Break	420 % @Thickness 2.00 mm	420 % @Thickness 0.0787 in	Flow Injection molded; ISO 37
	560 % @Thickness 2.00 mm	560 % @Thickness 0.0787 in	Across Flow Injection molded; ISO 37
	590 % @Thickness 2.00 mm	590 % @Thickness 0.0787 in	FlowExtruded; ISO 37

Processing Properties	Metric	English
Zone 1	170 °C	338 °F
Zone 2	180 °C	356 °F
Zone 3	190 °C	374 °F
Die Temperature	190 - 200 °C	374 - 392 °F
Melt Temperature	180 - 220 °C	356 - 428 °F
Mold Temperature	30.0 - 60.0 °C	86.0 - 140 °F

Descriptive Properties	Value	Comments
Features	General Purpose
	High Strength
Forms	Pellets
Generic Material	TPE
Generic Material Type	Styrenic Thermoplastic Elastomer (TES)
Generic Name	Thermoplastic Elastomer (TPE)
Injection Rate	Fast
Manufacturer / Supplier	GLS Thermoplastic Elastomers
Processing Method	Injection Molding
	Pipe Extrusion
Regional Availability	Africa & Middle East
	Asia Pacific
	Europe
	North America
	South America
RoHS Compliance	RoHS Compliant
Uses	Appliances
	Automotive Applications
	Consumer Applications
	General Purpose
	Industrial Applications

Users viewing this material also viewed the following: