- HOME
- POLYMER SEARCH
- Thermoplastic
- Fluoropolymer
- PFA
- Quadrant EPP Symalit® PFA Tetrafluoroethylene-perfluoroalkylvinylether (ASTM Product Data Sheet)
Quadrant EPP Symalit® PFA Tetrafluoroethylene-perfluoroalkylvinylether (ASTM Product Data Sheet)
| Category | Polymer , Thermoplastic , Fluoropolymer , PFA |
| Manufacturer | Quadrant Engineering Plastics Products |
| Trade Name | Symalit® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Quadrant EPP Symalit® PFA Tetrafluoroethylene-perfluoroalkylvinylether (ASTM Product Data Sheet).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 2.15 g/cc | 2.15 g/cc | ASTM D792 |
| Water Absorption | 0.050 % | 0.050 % | Immersion, 24hr; ASTM D570(2) |
| Water Absorption at Saturation | 0.050 % | 0.050 % | Immersion; ASTM D570(2) |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell M | 23 | 23 | ASTM D785 |
| Hardness, Rockwell R | 78 | 78 | ASTM D785 |
| Hardness, Shore D | 62 | 62 | ASTM D2240 |
| Tensile Strength | 20.7 MPa | 3000 psi | ASTM D638 |
| Elongation at Break | 500 % | 500 % | ASTM D638 |
| Tensile Modulus | 0.689 GPa | 100 ksi | ASTM D638 |
| Flexural Strength | 17.2 MPa | 2500 psi | ASTM D790 |
| Flexural Modulus | 0.586 GPa | 85.0 ksi | ASTM D790 |
| Compressive Strength | 20.7 MPa | 3000 psi | 10% Def.; ASTM D695 |
| Compressive Modulus | 0.517 GPa | 75.0 ksi | ASTM D695 |
| Shear Strength | 19.3 MPa | 2800 psi | ASTM D732 |
| Izod Impact, Notched | 7.79 J/cm | 14.6 ft-lb/in | ASTM D256 Type A |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 135 µm/m-°C @Temperature -40.0 - 149 °C |
75.0 µin/in-°F @Temperature -40.0 - 300 °F |
ASTM E831 |
| Melting Point | 302 °C | 575 °F | Crystalline, Peak; ASTM D3418 |
| Maximum Service Temperature, Air | 260 °C | 500 °F | Long Term |
| Deflection Temperature at 1.8 MPa (264 psi) | 79.4 °C | 175 °F | ASTM D648 |
| Flammability, UL94 | V-0 | V-0 | 1/8 inch (Estimated Rating) |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Surface Resistivity per Square | >= 1.00e+13 ohm | >= 1.00e+13 ohm | EOS/ESD S11.11 |
| Dielectric Constant | 2.1 @Frequency 1e+6 Hz |
2.1 @Frequency 1e+6 Hz |
ASTM D150 |
| Dielectric Strength | 3.94 kV/mm | 100 kV/in | Short Term; ASTM D149 |
| Dissipation Factor | 0.0001 - 0.001 @Frequency 1e+6 Hz |
0.0001 - 0.001 @Frequency 1e+6 Hz |
ASTM D150 |
| Compliance Properties | Metric | English | Comments |
|---|---|---|---|
| 3A-Dairy | Yes | Yes | |
| Canada AG | No | No | |
| FDA | Yes | Yes | |
| NSF | No | No | |
| USDA | No | No | |
| USP Class VI | Yes | Yes |
| Chemical Resistance Properties | Metric | English | Comments |
|---|---|---|---|
| Acids, Strong (pH 1-3) | Acceptable | Acceptable | |
| Acids, Weak | Acceptable | Acceptable | |
| Alcohols | Acceptable | Acceptable | |
| Alkalies, Strong (pH 11-14) | Unacceptable | Unacceptable | |
| Alkalies, Weak | Limited | Limited | |
| Chlorinated Solvents | Limited | Limited | |
| Conductive / Static Dissipative | No | No | |
| Continuous Sunlight | Limited | Limited | |
| Hot Water / Steam | Acceptable | Acceptable | |
| Hydrocarbons - Aliphatic | Acceptable | Acceptable | |
| Hydrocarbons - Aromatic | Acceptable | Acceptable | |
| Inorganic Salt Solutions | Acceptable | Acceptable | |
| Ketones, Esters | Unacceptable | Unacceptable |
Users viewing this material also viewed the following:
- MF-5062 Polyurethane-based Biomedical Elastomer
- Overview of materials for Polycarbonate, Gamma Radiation Resistant
- Gouda Vuurvast GOLITE 1.2.4. MIX GM Refractory Insulating Castable
- Shakespeare FN-29 Freshwater Nylon Copolymer Fishing Line, 17 lb
- A. Schulman POLYBLAK™ 3422 Black Color Concentrate, 35% Carbon Black Based In LDPE
- Formosa Plastics Formolene® 4101M Staple Fiber and Injection Molding Polypropylene
- ATI Allvac® Nickelvac® C 22 UNS N06022 Nickel Superalloy
- Overview of materials for Thermoplastic Olefinic Elastomer (TPO), Film Grade
- E-Polymers SEPAZ® V230A 30% Glass Fiber Reinforced PPA
Copyright © lookpolymers.com All Rights Reserved