- HOME
- POLYMER SEARCH
- Thermoplastic
- Elastomer, TPE
- Radici Heraflex® E 3918 TPC-ET Thermoplastic Elastomer
Radici Heraflex® E 3918 TPC-ET Thermoplastic Elastomer
| Category | Polymer , Thermoplastic , Elastomer, TPE |
| Manufacturer | Radici Group Plastics |
| Trade Name | Heraflex® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Radici Heraflex® E 3918 TPC-ET Thermoplastic Elastomer.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
TPC-ET Thermoplastic Elastomer. Lowest Modulus, Nominal Shore D/15s 35. Natural colorProcessing technology: Injection moldingInformation provided by Radici group.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.12 g/cc | 1.12 g/cc | |
| Water Absorption | 0.73 % @Time 86400 sec |
0.73 % @Time 24.0 hour |
MI / 08 |
| Melt Flow | 34 g/10 min @Load 2.16 kg, Temperature 230 °C |
34 g/10 min @Load 4.76 lb, Temperature 446 °F |
ISO 1133 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 39 | 39 | Instantaneous; ISO 868 |
| 35 @Time 15.0 sec |
35 @Time 0.00417 hour |
ISO 868 | |
| Tensile Strength at Break | 26.0 MPa | 3770 psi | ISO 527-1/2 |
| Elongation at Break | 968 % | 968 % | ISO 527 1/2 |
| Flexural Modulus | 0.0590 GPa | 8.56 ksi | ISO 178/1A |
| Izod Impact, Notched | NB | NB | ASTM D256 |
| Tear Strength | 113 kN/m | 645 pli | ASTM D1004 |
| Abrasion | 26 | 26 | mm<sup>3</sup>; DIN 53516 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Melting Point | 180 °C | 356 °F | |
| Vicat Softening Point | 128 °C @Load 5.10 kg |
262 °F @Load 11.2 lb |
50°C/h |
| Flammability, UL94 | HB @Thickness 1.60 mm |
HB @Thickness 0.0630 in |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Comparative Tracking Index | 600 V | 600 V |
Users viewing this material also viewed the following:
- PolyOne Trilliant™ HC HC9820-0030 RS Natural Polyetheretherketone (PEEK)
- Polimeri Europa Riblene® MQ 10 R Low Density Polyethylene - Injection Molding
- Pau Tai UNISTAB MS-505 Solid Complex Stabilizer
- Minelco FordaTal Talc
- Tra-Con Tra-Bond 9349M Room Temperature Cure Flexible Epoxy Adhesive
- Eastman Tenite 550E3V45510 Cellulose Acetate Butyrate, Water Clear, Trsp
- Aearo E-A-R Specialty Composites VersaDamp™ V-2725 TPE
- Arlon 56141R025 0.025" (0.635 mm) Uncured Silicone Rubber with Fiberglass Substrate
- Techmer ES HiFill® PP LGF40 CC HS BK 40% Glass Filled
Copyright © lookpolymers.com All Rights Reserved