Solvay Specialty Polymers Amodel® A-4122 LS WH678 Polyphthalamide (PPA) (Unverified Data**)

Category	Polymer , Thermoplastic , Polyphthalamide (PPA) , Polyphthalamide (PPA), 20% Glass Fiber Reinforced
Manufacturer
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Solvay Specialty Polymers Amodel® A-4122 LS WH678 Polyphthalamide (PPA) (Unverified Data**).pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Amodel A-4122 LS is a 22% glass fiber reinforced, light-stabilized, high-reflectivity white grade of Amodel polyphthalamide (PPA). It is designed to provide high crystallinity when molded in water-cooled molds. This resin exhibits high heat resistance, high strength and stiffness over a broad temperature range, low moisture absorption, excellent chemical resistance and excellent electrical properties. Its rapid crystallization rate and high flow can result in short cycles and therefore high molding productivity and lower part cost. - White: A-4122 LS WH678Injection Notes: Injection Rate: 3 to 4 in/sec Holding Pressure: 50% of injection pressureInformation provided by Solvay Specialty Polymers.

Physical Properties	Metric	English	Comments
Density	1.59 g/cc	0.0574 lb/in³	ISO 1183/A
Filler Content	22 %	22 %	Glass Fiber Reinforcement
Water Absorption	0.19 % @Time 86400 sec	0.19 % @Time 24.0 hour	ASTM D570
Linear Mold Shrinkage, Flow	0.0040 cm/cm	0.0040 in/in	ASTM D955
Linear Mold Shrinkage, Transverse	0.0060 cm/cm	0.0060 in/in	ASTM D955

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell R	124	124	R-Scale; ASTM D785
Tensile Strength	104 MPa	15100 psi	ASTM D638
Elongation at Break	1.2 %	1.2 %	ASTM D638
Tensile Modulus	9.10 GPa	1320 ksi	ASTM D638
Flexural Strength	165 MPa	23900 psi	ASTM D790
Flexural Modulus	8.10 GPa	1170 ksi	ASTM D790
Izod Impact, Notched	0.180 J/cm	0.337 ft-lb/in	ASTM D256

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	190 µm/m-°C @Temperature 150 - 250 °C	106 µin/in-°F @Temperature 302 - 482 °F	TMA; ASTM E831
	250 µm/m-°C @Temperature 0.000 - 100 °C	139 µin/in-°F @Temperature 32.0 - 212 °F	TMA; ASTM E831
Melting Point	323 °C	613 °F	Peak; ASTM D3418
Deflection Temperature at 0.46 MPa (66 psi)	290 °C	554 °F	Unannealed; ASTM D648

Optical Properties	Metric	English	Comments
Reflection Coefficient, Visible (0-1)	>= 0.90	>= 0.90	460 nm; ASTM E1331
	>= 0.90	>= 0.90	540 nm; ASTM E1331
	>= 0.90	>= 0.90	615 nm; ASTM E1331

Processing Properties	Metric	English
Rear Barrel Temperature	318 - 324 °C	604 - 615 °F
Middle Barrel Temperature	318 - 324 °C	604 - 615 °F
Front Barrel Temperature	327 - 332 °C	621 - 630 °F
Melt Temperature	329 - 343 °C	624 - 649 °F
Mold Temperature	65.0 - 93.0 °C	149 - 199 °F
Drying Temperature	120 °C	248 °F
Dry Time	4.00 hour	4.00 hour
Moisture Content	0.030 - 0.060 %	0.030 - 0.060 %

Descriptive Properties	Value	Comments
Additive	UV Stabilizer
Appearance	White
Availability	Africa & Middle East
	Asia Pacific
	Europe
	North America
	South America
Features	Fast Molding Cycle
	Good Chemical Resistance
	Good Color Stability
	High Reflectivity
	High Stiffness
	Light Stabilized
	Low Moisture Absorption
Forms	Pellets
Generic	PPA
Processing Method	Water-Heated Mold Injection Molding
RoHS Compliance	RoHS Compliant
Uses	Automotive Applications
	Automotive Electronics

Users viewing this material also viewed the following: