Zotefoams Plastazote® LD33FM Low Density Polyethylene Foam, Flame Retarded

Category	Polymer , Thermoplastic , Polyethylene (PE) , LDPE
Manufacturer	Zotefoams
Trade Name	Plastazote®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Zotefoams Plastazote® LD33FM Low Density Polyethylene Foam, Flame Retarded.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Plastazote® is a closed cell, cross-linked polyethylene foam manufactured using nitrogen expansion technology to produce foams with exceptional cell size uniformity, low odor / high purity and outstanding physical attributes.Compliant with EC food contact and US FDA regulations.Information provided by Zotefoams

Physical Properties	Metric	English	Comments
Density	0.0270 - 0.0360 g/cc	0.000975 - 0.00130 lb/in³	sheet density
	0.0330 g/cc	0.00119 lb/in³	Nominal skin/skin; BS ISO 7214 1998
Cell Length	0.370 mm	0.0146 in	Typical Diameter
	0.250 - 0.600 mm	0.00984 - 0.0236 in

Mechanical Properties	Metric	English	Comments
Hardness, Shore OO	55	55	10 mm cell/cell thickness; ISO 868 1985
Tensile Strength	0.380 MPa	55.1 psi	ISO 7214 1998
Elongation at Break	150 %	150 %
Compressive Yield Strength	0.0510 MPa @Strain 10.0 %	7.40 psi @Strain 10.0 %	BS ISO 7214 1998
	0.0680 MPa @Strain 25.0 %	9.86 psi @Strain 25.0 %	BS ISO 7214 1998
	0.102 MPa @Strain 40.0 %	14.8 psi @Strain 40.0 %	BS ISO 7214 1998
	0.137 MPa @Strain 50.0 %	19.9 psi @Strain 50.0 %	BS ISO 7214 1998
Tear Strength	0.830 kN/m	4.74 pli	BS EN ISO 8067 1995
Compression Set	3.5 % @Time 79200 sec, Strain 25.0 %	3.5 % @Time 22.0 hour, Strain 25.0 %	24 hr recovery; BS ISO 7214 1998
	10 % @Time 79200 sec, Strain 25.0 %	10 % @Time 22.0 hour, Strain 25.0 %	0.5 hr recovery; BS ISO 7214 1998
	14.5 % @Time 79200 sec, Strain 50.0 %	14.5 % @Time 22.0 hour, Strain 50.0 %	24 hr recovery; BS ISO 7214 1998
	22.5 % @Time 79200 sec, Strain 50.0 %	22.5 % @Time 22.0 hour, Strain 50.0 %	0.5 hr recovery; BS ISO 7214 1998

Thermal Properties	Metric	English	Comments
Thermal Conductivity	0.0390 W/m-K	0.271 BTU-in/hr-ft²-°F	mean temp of 10°C; ISO 8302 1991
Maximum Service Temperature, Air	100 °C	212 °F
Minimum Service Temperature, Air	-70.0 °C	-94.0 °F

Descriptive Properties	Value	Comments
Flammability	Automotive: FMVSS.302 burn rate	Pass: 2 mm and thicker
	Construction: DIN4102 pt14-B1	Pass: 6 to 20 mm thick
	Horizontal Burn Rate: ISO 7214 1998	Extinguishes and melts from flame

Users viewing this material also viewed the following: