Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 0.144 g/cc | 0.00521 lb/in³ | ASTM D3574-95 Test A |
Rogers Corporation Poron® 4790-92-09 Urethane Foam, Extra Soft, Slow Rebound, PET Reinforced Extra soft, slow rebound with a very low closure force. Standard available thickness range from 0.021" to 0.500" (0.53 mm to 12.7 mm).Features and Benefits of PORON Products: Excellent compression .. |
|||
Density | 0.144 g/cc | 0.00521 lb/in³ | ASTM D3574-95 Test A |
Rogers Corporation Poron® Shock Seal™ 4790-79-9 Handheld Urethane Foam, Handheld Grade, PET Reinforced Extreme Impact Protection, Ultimate ReliabilitySpecifically engineered to protect sensitive components from damage caused by impactConsistent cushioning performance through repeated impactsExcellent.. |
|||
Density | 0.144 g/cc | 0.00521 lb/in³ | ASTM D3574-95 Test A |
Rogers Corporation Poron® ThinStik ShockSeal™ 79-09021 Self-Adhesive Urethane Foam PORON® ThinStik™ materials utilize an acrylic pressure sensitive adhesive manufactured to Roger's specifications. This adhesive provides reliable bonding to a wide variety of substrates, exhibits.. |
|||
Density | 0.144 g/cc | 0.00521 lb/in³ | ASTM D3574-95 Test A |
Rogers Corporation Poron® ThinStik™ 92-09020 Self-Adhesive Urethane Foam PORON® ThinStik™ materials utilize an acrylic pressure sensitive adhesive manufactured to Roger's specifications. This adhesive provides reliable bonding to a wide variety of substrates, exhibits.. |
|||
Density | 0.144 g/cc | 0.00521 lb/in³ | Compressed Density |
Northstar Polymers MPP-M09D "Slow Cure" Semi-Rigid Foam Formulation This foam polyurethane formulation is designed yield structural foam by either hand-mixing or machine casting method. The pot-life of this material is set longer than ordinary rigid foam formulatio.. |
|||
Density | 0.144 - 0.176 g/cc | 0.00521 - 0.00637 lb/in³ | |
Mid-Mountain Materials CERMEX® MT1000 Needled Fiberglass Mat CERMEX® MT1000 fiberglass mat is comprised of high purity, highly resilient E-Glass fibers. CERMEX® MT1000 is lightweight, strong, and highly efficient as insulation in most high heat environm.. |
|||
Density | 0.144 - 0.272 g/cc | 0.00521 - 0.00984 lb/in³ | |
Monmouth Rubber & Plastics Durafoamâ„¢ DK5151 NEO/EPDM Polymeric Blend Information provided by Monmouth Rubber & Plastics Corp. |
|||
Density | 0.144 - 0.160 g/cc | 0.00521 - 0.00579 lb/in³ | |
Unifrax Insulfrax® Paper Insulfrax® Paper is an evolutionary product which is manufactured by forming Insulfrax Fiber in a nonwoven matrix. These fibers are randomly oriented during manufacturing and then held in place wi.. |
|||
Density | 0.144 g/cc | 0.00521 lb/in³ | |
Hexcel® HexWeb® CFC™-20-1/8-9.0 Composite Flooring Honeycomb Core Hexweb CFC™-20 is manufactured from NOMEX aramid fiber sheets. A thermosetting adhesive is used to bond these sheets at the nodes and, after expanding to the hexagonal confiation, the block is dipp.. |
|||
Density | 0.144 g/cc | 0.00521 lb/in³ | |
Hexcel® HexWeb® CFC™-20-1/8-9.0 Composite Flooring Honeycomb Core Hexweb CFC™-20 is manufactured from NOMEX aramid fiber sheets. A thermosetting adhesive is used to bond these sheets at the nodes and, after expanding to the hexagonal confiation, the block is dipp.. |
|||
Density | 0.144 g/cc | 0.00521 lb/in³ | |
Hexcel® HexWeb® HRH-10 - 1/8- 9.0 Aramid Fiber/Phenolic Resin Honeycomb Designation: Material-Cell Size-Density.Hexweb HRH-10 is manufactured from NOMEX aramid fiber sheets. A thermosetting adhesive is used to bond these sheets at the nodes, and after expanding to the h.. |