Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.01 g/cc | 0.0365 lb/in³ | ASTM D792 |
Multibase Multi-Flex® TPE A 8592 MEDIUM TAUPE Heating aging the material 1000 hours at 125°C leads to a +7% change in the tensile strength, +4% change in elongation, and +12% change in tear strength. Ash is 16%. Multi-Flex TPE contains Krato.. |
|||
Density | 1.01 g/cc | 0.0365 lb/in³ | ASTM D792 |
Multibase Multi-Flex® TPE G 7680 NAT The burn rate is 1.2 in/min (30 mm/min) based on ASTM FM VSS 302. Multi-Flex TPE contains Kraton™ G.Data provided by Multibase. |
|||
Density | 1.01 g/cc | 0.0365 lb/in³ | |
Plastcom SLOVALEN PC 71 T 15 PP, 15% mineral filling FeaturesModified PP for injection moulding with the content of 15% mineral filling. Increased rigidity, strength and thermal. Decreased shrinkage. General application in all industry branches - pack.. |
|||
Density | 1.01 g/cc | 0.0365 lb/in³ | |
Premix Thermoplastics PRE-ELEC® PP 1398 Conductive Thermoplastic Compound PRE-ELEC® PP 1398 is a conductive thermoplastic compound based on polypropylene. Conductivity is achieved by using special conductive carbon black. In addition to a low electrical resistivity PRE-E.. |
|||
Density | 1.01 g/cc | 0.0365 lb/in³ | ISO 1183 |
SABIC Innovative Plastics LNP Faradex MS003XXC PP (Europe-Africa-Middle East) LNP* Faradex* MS003XXC is a compound based on Polypropylene resin containing Stainless Steel Fiber. Added features of this material include: EMI/RFI Shielding.This data was supplied by SABIC-IP for.. |
|||
Density | 1.01 g/cc | 0.0365 lb/in³ | Finaprene 2602 Test |
Total Finaprene® 507 Styrene-Butadiene TPE Copolymer
(discontinued **) Styrene-Butadiene CopolymerDescription: Finaprene® 507 is a thermoplastic elastomer type radial styrene-butadiene block copolymer. Thanks to its high styrene content, Finaprene® 507 provides exce.. |
|||
Density | 1.01 g/cc | 0.0365 lb/in³ | ASTM D792 |
Chevron Phillips K-Resin® BK15 Styrene-Butadiene Copolymer, Injection Molding Grade
(discontinued **) Styrene-Butadiene CopolymerCustomer Benefits: BK15 is an SBC consisting of our developmental BK10 grade with a mold release added for easier processing. BK15 molded parts give excellent detail on f.. |
|||
Density | 1.01 g/cc | 0.0365 lb/in³ | ISO 1183 |
Inno-Comp INNOPOL® CS 2-2523 EP 16% Talc Filled, Elastomer Modified Polypropylene Copolymer INNOPOL® CS 2-2523 EP is a 16% talc-filled, elastomer modified compound based on polypropylene block-copolymer. This grade is available in natural and custom colored form.INNOPOL® CS 2-2523 EP.. |
|||
Density | 1.01 g/cc | 0.0365 lb/in³ | ASTM D792 |
Techmer ES Luriblend® HDPE TL10 Availability: North AmericaForms: PelletsAdditive: PTFE LubricantInformation provided by TP Composites, Inc. |
|||
Density | 1.01 g/cc @Temperature 20.0 °C |
0.0365 lb/in³ @Temperature 68.0 °F |
Relative density |
Suqian Unitechem Light Stabilizer 944 Chemical Name: Poly-{[6-[(1,1,3,3-tetramethylbutyl)amino]-1,3,5-triazine-2,4-diyl][(2,2,6,6-tetramethyl-4-piperidyl)imino]-1,6-hexanediyl[(2,2,6,6-tetramethyl-4-piperidyl)imino]}CAS NO.: 70624-18-9M.. |
|||
Density | 1.01 g/cc | 0.0365 lb/in³ | ASTM D792 |
Zeon Chemicals Zeonor® 1020R Cyclo Olefin Polymer Zeonor® is a line of thermoplastic polyolefin resin with an excellent combination of optical and electronic properties. These unique Cyclo Olefin Polymer (COP) was developed by Zeon Corporation usi.. |
|||
Density | 1.01 g/cc | 0.0365 lb/in³ | ISO 1183 |
Polyram PlusTek PD1002NT Nylon 12 for Extrusion Medium viscosity Nylon 12 for extrusion application.Information provided by Polyram. |
|||
Density | 1.01 g/cc | 0.0365 lb/in³ | |
EMS-Griltech Grilamid® DN 10 Nylon 12 Monofilament Description: GRILAMID Monofilaments are mainly used in Filtration. Data provided by Description: GRILAMID Monofilaments are mainly used in Filtration. Data provided by EMS-Griltech. |
|||
Density | 1.01 g/cc | 0.0365 lb/in³ | ISO 1183 |
EMS-Grivory Grivory® XE 3817 black 9992 PA12 Product description: Grilamid XE 3817 black 9992 is a medium viscosity, heat and UV-stabilized Polyamid 12. Grilamid XE 3817 black 9992 is especially suitable for the coating of metal tubes and offe.. |
|||
Density | 1.01 g/cc | 0.0365 lb/in³ | |
DuPont Performance Polymers Zytel® 103FHSA NC010 Nylon 66
(Unverified Data**) Unreinforced Heat Stabilized Polyamide 66 Zytel 103FHSA NC010 is a heat stabilized lubricated polyamide 66 for injection molding.Information provided by DuPont Performance Polymers |
|||
Density | 1.01 g/cc | 0.0365 lb/in³ | |
DuPont Performance Polymers Zytel® 135F NC010 Nylon 66
(Unverified Data**) Unreinforced Nucleated Polyamide 66 Zytel 135F NC010 is a nucleated polyamide 66 resin for injection molding. It was developed for fast cycles and high productivity.Information provided by DuPont Pe.. |
|||
Density | 1.01 g/cc | 0.0365 lb/in³ | ASTM D792 |
Arkema Group Pebax® 2533 Polyether Block Amide (PEBA) Information provided by Arkema Group |
|||
Density | 1.01 g/cc | 0.0365 lb/in³ | ISO 1183 |
Arkema Group Pebax® 5533 SP 01 Polyether Block Amide (PEBA) Polyether block amide PEBAX® 5533 SP 01 is a thermoplastic elastomer made of flexible polyether and rigid polyamide. This SP grade has been developed to be heat and UV resistant.Information provide.. |
|||
Density | 1.01 g/cc | 0.0365 lb/in³ | ASTM D792 |
Arkema Group Pebax® 6333 Polyether Block Amide (PEBA) Information provided by Arkema Group |
|||
Density | 1.01 g/cc | 0.0365 lb/in³ | |
Arkema Group Pebax® 6333 SN 01 Polyether Block Amide (PEBA) (Dry) POLYETHER BLOCK AMIDE (PEBA) hardness 63 shore D Non plasticized flexible Polyamide Outstanding mechanical properties at low temperature (-40°C) Applications: Sport (Football shoe sole, ski top lay.. |
|||
Density | 1.01 g/cc | 0.0365 lb/in³ | ISO 1183 |
Arkema Group Pebax® 7033 SA 01 Polyether Block Amide (PEBA) Polyether block amide PEBAX® 7033 SA 01 is a thermoplastic elastomer made of flexible polyether and rigid polyamide. This SA grade is specially designed to food uses.Information provided by Arkema .. |
|||
Density | 1.01 g/cc | 0.0365 lb/in³ | |
Arkema Group Rilsan® AESN TL Nylon 12, Flexible Tubing Grade (Dry) Designation ISO 1874-PA12,EHL,22-010Rigid grade for tubes extrusion. Available colors: black and natural. Light and heat stabilized.High impact strength. Good chemical resistance. Very good ability .. |
|||
Density | 1.01 g/cc | 0.0365 lb/in³ | ASTM D1475 |
Aptek UVIBOND 7100 Semi-rigid, UV-Curing Urethane Adhesive UVIBOND 7100 is an unfilled, one component, electrically insulating, transparent, semi-rigid urethane adhesive designed for bonding polycarbonate, ABS, glass and other various substrates. UVIBOND 7.. |
|||
Density | 1.01 g/cc | 0.0365 lb/in³ | ISO 2781 |
Termopol Termoton® K2GA2060A TPE Compound, based on SEBS and Polyolefins Main Characteristics: Wide range of hardness; High strength elasticity; 100% recyclable; Easy processing by means of the traditional technologies for thermoplastic materials; Additional resistance t.. |