Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 2.70 g/cc | 0.0975 lb/in³ | |
Mykroy/Mycalex MM 500 Machining Grade Glass-bonded Mica Composite Synthetic mica filler. Does not burn. Better radiation resistance (3 x 10^10 Rads-Cobalt) than grade 400.This ceramoplastic material is a versatile and efficient insulating material designed to me.. |
|||
Density | 2.70 g/cc | 0.0975 lb/in³ | Green Density |
Nabaltec NABALOX® NO 615-30 Reactive Alumina NABALOX® aluminum oxide has a number of advantages including low sintering temperaturewide sintering rangeflexible processinghigh sintered densities high wear and impact resistanceelectrical insula.. |
|||
Density | 2.70 g/cc | 0.0975 lb/in³ | Green Density |
Nabaltec NABALOX® NO 625-30 Reactive Alumina NABALOX® aluminum oxide has a number of advantages including low sintering temperaturewide sintering rangeflexible processinghigh sintered densities high wear and impact resistanceelectrical insula.. |
|||
Density | 2.70 g/cc | 0.0975 lb/in³ | |
Rogers Corporation RO3206 Woven-Glass Reinforced PTFE Laminate Features and Benefits:Woven glass reinforcement - Improves rigidity for easier handlingUniform electrical and mechanical performance - ideal for complex multi-layer high frequency structuresLow diel.. |
|||
Density | 2.70 g/cc | 0.0975 lb/in³ | |
Ferro EG 2410 Specialty Glass Glass Type: Si-MG-Al Typical Powder Form: MVG Typical Application: Sintering Aid / Glaze Ferro offers a wide range of compositions for specialty applications including sintering aids used in the gl.. |
|||
Density | 2.70 g/cc | 0.0975 lb/in³ | Apparent |
Gouda Vuurvast AK 80 A Dense Refractory Brick Description: A 78% alumina, bauxite based, quality with a high abrasion resistance, therefore very well suitable for rotary cement kilns.Remarks: This data represents average values, obtained from s.. |
|||
Density | 2.70 g/cc | 0.0975 lb/in³ | Apparent |
Gouda Vuurvast AK 80 FM Dense Refractory Brick Description: This fused mullite based brick has a very good thermal shock resistance and an excellent resistance against liquid slags at high temperature.Remarks: This data represents average values.. |
|||
Density | 2.70 g/cc | 0.0975 lb/in³ | |
Schott S8802 Contrast Enhancement Filter Contrast Enhancement FilterInformation Provided by SCHOTT North America, Inc. |
|||
Density | 2.70 g/cc | 0.0975 lb/in³ | ASTM D792 |
SABIC Innovative Plastics LNP THERMOCOMP WH0270B PBT LNP THERMOCOMP* WH0270B is a compound based on Polybutylene Terephalate resin containing High Specific Gravity Filler. Added features of this material include: High Specific Gravity. |
|||
Density | 2.70 g/cc | 0.0975 lb/in³ | ISO 1183 |
SABIC Innovative Plastics LNP THERMOCOMP WH0270B PBT LNP THERMOCOMP* WH0270B is a compound based on Polybutylene Terephalate resin containing High Specific Gravity Filler. Added features of this material include: High Specific Gravity. |
|||
Density | 2.70 g/cc | 0.0975 lb/in³ | ASTM D792 |
SABIC Innovative Plastics LNP THERMOCOMP WH0270B PBT (Asia Pacific) LNP THERMOCOMP* WH0270B is a compound based on Polybutylene Terephalate resin containing High Specific Gravity Filler. Added features of this material include: High Specific Gravity. |
|||
Density | 2.70 g/cc | 0.0975 lb/in³ | ISO 1183 |
SABIC Innovative Plastics LNP THERMOCOMP WH0270B PBT (Asia Pacific) LNP THERMOCOMP* WH0270B is a compound based on Polybutylene Terephalate resin containing High Specific Gravity Filler. Added features of this material include: High Specific Gravity. |
|||
Density | 2.70 g/cc | 0.0975 lb/in³ | |
Toho Tenax Besfight® MC Type I (12,000 Filament) Nickel Coated Carbon Fiber Besfight MC Polyacrylonitrile (PAN) based fiber combines the mechanical properties and flexibility of carbon fiber with the electrical conductivity of nickel. It does not delaminate even at the mec.. |
|||
Density | 2.70 g/cc | 0.0975 lb/in³ | |
Goodfellow Aluminum 99/Silicon 1 Alloy An addition of 1% Silicon lowers the melting range without producing brittleness. Aluminum/Silicon alloys are used in brazing alloys and welding wire for joining Aluminum as well as bonding wire in .. |
|||
Density | 2.70 g/cc | 0.0975 lb/in³ | |
Constellium PLAN 6061 Aluminum Rolled Plate Rolled plates in 6061 PLAN are optimized for minimum residual stress and improved dimensional tolerances. 6061 PLAN is mainly used for medium stressed mechanical components, manufactured by intensiv.. |
|||
Density | 2.70 g/cc | 0.0975 lb/in³ | |
Constellium PLAN 6082 Aluminum Rolled Plate Rolled plates in 6082 PLAN are optimized for minimum residual stress and improved dimensional tolerances. 6082 PLAN is mainly used for medium stressed mechanical components, manufactured by intensiv.. |
|||
Density | 2.70 g/cc | 0.0975 lb/in³ | |
3M Nextel™ AF-10 Industrial Woven Fabric 312 Information provided by 3M |
|||
Density | 2.70 g/cc | 0.0975 lb/in³ | |
3M Nextel™ AF-12 Aerospace Woven Fabric 312 Information provided by 3M |
|||
Density | 2.70 g/cc | 0.0975 lb/in³ | Alloy 1100 Property (Annealed) |
Arlon 90B32R016AC Aluminum Clad Press Pad with "C-Finish" Design/Construction:Side 2: Alloy 1100 Aluminum FoilSide 1: Cured Silicone RubberThis data represents typical values for the production material and should not be used as material specifications.I.. |
|||
Density | 2.70 g/cc | 0.0975 lb/in³ | Alloy 1100 Property (Annealed) |
Arlon 91B32R016AC Aluminum Clad Silicone Press Pad with "C-finish" Design/Construction:Side 2: Alloy 1100 H18 Aluminum FoilSide 1: Cured Silicone RubberThis data represents typical values for the production material and should not be used as material specificatio.. |
|||
Density | 2.70 g/cc | 0.0975 lb/in³ | AA 5005 |
Aleris 55HX® Aluminum (5005-H14) Used in interior and exterior architectural applications such as façades and claddings, ceilings and walls, and roofs. Attributes include: anodizing free of streaks; color uniformity between produ.. |
|||
Density | 2.70 g/cc | 0.0975 lb/in³ | |
ALIMEX 6082 T651 Aluminum Alloy Rolled Rolled aluminium material according to DIN EN standard. Information provided by ALIMEX GmbHSolution heat treated, stress relieved by stretching a controlled amount and then artificially aged. |
|||
Density | 2.70 g/cc | 0.0975 lb/in³ | |
Anderman Ceramics EC100P Recrystallized Silicon Carbide EC100P is a porous silicon carbide with excellent thermal shock resistance and high strength and high temperature operating capabilities up to 2910 °F (1600 °C). It is excellent for use in furnace.. |
|||
Density | 2.70 g/cc | 0.0975 lb/in³ | |
3M Nextel™ AF-11 Aerospace Woven Fabric 312 Information provided by 3M |
|||
Density | 2.70 g/cc | 0.0975 lb/in³ | |
3M Nextel™ AF-20 Industrial Woven Fabric 312 Information provided by 3M |
|||
Density | 2.70 g/cc | 0.0975 lb/in³ | |
3M Nextel™ AF-30 Industrial Woven Fabric 312 Information provided by 3M |
|||
Density | 2.70 g/cc | 0.0975 lb/in³ | |
3M Nextel™ AF-40 Industrial Woven Fabric 312 Information provided by 3M |
|||
Density | 2.70 g/cc | 0.0975 lb/in³ | |
CeramTec 645 Steatite (MgO-SiO2) Te value is 810°C. Hasselman Thermal Shock value is 600 K.Data provided by CeramTec North America. |
|||
Density | 2.70 g/cc | 0.0975 lb/in³ | |
3M Nextel™ 312 Industrial Ceramic Fiber Chemical composition above is wt%. Crystal phase is mullite + amorphous (or 100% amorphous). Filament diameter is 10-12 µm.3M Nextel fibers 312, 440, and 550 are designed for non-structural appli.. |