Physical Properties | Metric | English | Comments |
---|---|---|---|
Particle Size | 30 µm | 30 µm | Geon® DFT 1466; Internal Method |
PolyOne Geon™ FIT E 51 Polyvinyl Chloride Homopolymer (PVC Homopolymer) Geon® FIT E 51 is a medium molecular weight homopolymer resin intended for use as a Formulation Improvement Tool (FIT) in plastisol formulations which enhance the plastisol usage (pot life) and red.. |
|||
Particle Size | 30 µm | 30 µm | Mean Volume, Geon® DFT 1466; Internal Method |
PolyOne Geon™ FIT E 52 Polyvinyl Chloride Homopolymer (PVC Homopolymer) Geon® FIT E 52 is a high molecular weight homopolymer resin intended for use as a Formulation Improvement Tool (FIT) in plastisol formulations which enhance the plastisol usage (pot life) and reduc.. |
|||
Particle Size | 30 µm | 30 µm | Geon® DFT 1466; Internal Method |
PolyOne Geon™ 210 Series 217 Blending Resin Polyvinyl Chloride Homopolymer (PVC Homopolymer) Geon® 217 is a low to medium molecular weight homopolymer blending resin intended for use as a formulation tool in plastisol formulations.It improves air release performance resulting in reduced sc.. |
|||
Particle Size | 30 µm | 30 µm | 75% finer than |
Imerys Minsilsparâ„¢ Feldspar Minsilspar is a 170 mesh feldspathic sand (sandspar) used primarily in the Sanitaryware industry.Information provided by Imerys |
|||
Particle Size | >= 30 µm | >= 30 µm | 0.3% finer than |
Imerys Minsparâ„¢ 1 Feldspar Minspar 1 is a minus 30 mesh Feldspar product used in the glass container and ceramic tile markets.Information provided by Imerys |
|||
Particle Size | 30 - 40 µm | 30 - 40 µm | 90% |
H.C. Starck Amperit® 588.059 Chromium Carbide-Nickel Chromium 75-25 (Cr3C2-NiCr) |
|||
Particle Size | 30 - 40 µm | 30 - 40 µm | 50% |
H.C. Starck Amperit® 832.054 Zirconium Oxide-Yttrium Oxide 93-7 (ZrO2-Y2O3) |
|||
Particle Size | 30 - 46 µm | 30 - 46 µm | |
Lucite International Colacryl ® B866 Acrylic Dental Resin Cold-curing denture repair resin with Methyl Methacrylate based homopolymers. Features fast polymerisation, easy mixing, good clarity, short hydroflask cure cycles, and excellent pigment acceptance.. |
|||
Particle Size | 30 - 45 µm | 30 - 45 µm | |
Lucite International Colacryl ® TS1326 Acrylic Dental Resin Colacryl® TS1326 is a plasticiser free, ethyl methacrylate based resin aimed at the formulation of temporary crown and bridge materials. It may be used in conjunction with most traditional cold c.. |
|||
Particle Size | 30 - 38 µm | 30 - 38 µm | MV |
H.C. Starck Amperit® 553.074 Tungsten Carbide-Cobalt-Chromium 86-10-4 (WC-Co-Cr) |
|||
Particle Size | 30 - 40 µm | 30 - 40 µm | Blue |
Solvay Chemicals Blue pigment Information provided by Solvay |
|||
Particle Size | 30 µm | 30 µm | 95%, Laser diffraction; QSOP-5&75 |
Shamrock Technologies Fluoro T® 607 Thermoplastic Grade PTFE Additive The addition of micronized polytetrafluoroethylene (PTFE) powder to polymeric resins provides greatly increased resistance to surface wear and abrasion. PTFE has a very low coefficient of friction .. |
|||
Particle Size | 30 µm | 30 µm | 95%, Laser diffraction; QSOP-5&75 |
Shamrock Technologies Fluoro T® 707 Thermoplastic Grade PTFE Additive The addition of micronized polytetrafluoroethylene (PTFE) powder to polymeric resins provides greatly increased resistance to surface wear and abrasion. PTFE has a very low coefficient of friction .. |
|||
Particle Size | 30 µm | 30 µm | 95%, Laser diffraction; QSOP-5&75 |
Shamrock Technologies Fluoro T® 807 Thermoplastic Grade PTFE Additive The addition of micronized polytetrafluoroethylene (PTFE) powder to polymeric resins provides greatly increased resistance to surface wear and abrasion. PTFE has a very low coefficient of friction .. |
|||
Particle Size | 30 µm | 30 µm | Before Conversion |
Silberline Extra Sparkle Silvet® 400-10-E1 Sparkle Silvet® E1 grades are easy to disperse and are compatible with a variety of polymers, particularly polyolefins. They are typically used to make concentrates or compounds for use in final .. |
|||
Particle Size | 30 µm | 30 µm | |
Silberline Extra Sparkle Silvex® 400-10-C Sparkle Silvex® C grades are aluminum pigment flakes dampened with a plasticizer to help prevent the individual flakes from becoming airborne during handling and processing. They are well suited .. |
|||
Particle Size | 30 µm | 30 µm | |
Silberline Sparkle Silver® 3141-ST Sparkle Silver® 3141-ST is a coarse high sparkle, non-leafing aluminum pigment popular for Automotive Applications. This pigment can be used with tints to produce a wide range of polychromatic ef.. |
|||
Particle Size | 30 µm | 30 µm | |
Silberline Sparkle Silver® 3166-AR Sparkle Silver® 3166-AR is a coarse high sparkle, non-leafing aluminum pigment popular for Automotive Applications. This pigment can be used with tints to produce a wide range of polychromatic ef.. |
|||
Particle Size | 30 µm | 30 µm | 98% less than value (Size C) |
Vesta Ceramics SicoMill® Grade 2 Silicon Powder General Description:SicoMill® is a fine-grained silicon powder, specially developed for the ceramic industry. We have five standard grinding grades, but we can produce powders adapted to single cu.. |
|||
Particle Size | 30 µm | 30 µm | 98% less than value (Size C) |
Vesta Ceramics SicoMill® Grade 4 Silicon Powder General Description:SicoMill® is a fine-grained silicon powder, specially developed for the ceramic industry. We have five standard grinding grades, but we can produce powders adapted to single cu.. |
|||
Particle Size | <= 30 µm | <= 30 µm | |
Epoxy Technology EPO-TEK® B912-8 Epoxy Product Description: A single component, thermally and electrically conductive, epoxy adhesive designed for semiconductor die attach and circuit assembly applications. Its unique features are a pot.. |
|||
Particle Size | 30 - 50 µm | 30 - 50 µm | D(0.5) |
Akzo Nobel Expancel® 551 WE 40 d36 Wet expanded microspheres Expancel microspheres are thermoplastic hollow spheres. The microspheres are white spherically formed particles with a thermoplastic shell encapsulating a gas. When the microspheres are heated the.. |
|||
Particle Size | 30 µm | 30 µm | 50th% |
3M H50/10000EPX Glass Bubbles 3M™ Glass Bubbles are engineered hollow glass microspheres that are alternatives to conventional fillers and additives such as silicas, calcium carbonate, talc, clay, etc., for many demanding appli.. |
|||
Particle Size | 30 µm | 30 µm | 10th% |
3M K1 Glass Bubbles 3M™ Glass Bubbles are engineered hollow glass microspheres that are alternatives to conventional fillers and additives such as silicas, calcium carbonate, talc, clay, etc., for many demanding appli.. |
|||
Particle Size | 30 µm | 30 µm | |
3M Dyneon™ PFA 6503PAZ Fluoroplastic Powder 3M™ Dyneon™ Fluoroplastic Powder PFA 6503PAZ is a fluorothermoplastic powder designed for use in thin film powder coatings. Typical applications include non-stick surfaces, chemical vessel and tan.. |
|||
Particle Size | 30 µm | 30 µm | |
3M Dyneon™ PFA 6503PBZ Fluoroplastic Powder 3M™ Dyneon™ Fluoroplastic Powder PFA 6503PBZ is a fluorothermoplastic powder with excellent thermal stability characteristics, designed for use in thin film powder coatings. Typical applications i.. |
|||
Particle Size | 30 µm | 30 µm | 50th% |
3M S60 Glass Bubbles 3M™ Glass Bubbles are engineered hollow glass microspheres that are alternatives to conventional fillers and additives such as silicas, calcium carbonate, talc, clay, etc., for many demanding appli.. |
|||
Particle Size | 30 - 100 µm | 30 - 100 µm | Range (D10 to D90); Laser Diffraction |
ALM PA 620-MF Mineral Fiber Filled Nylon 12 SLS Prototyping Polymer Information provided by Advanced Laser Materials (ALM). |
|||
Particle Size | 30 - 40 µm | 30 - 40 µm | 90% |
H.C. Starck Amperit® 529.053 Tungsten Carbide - Hastalloy C 85-15 (NiMoCrFeCo) |
|||
Particle Size | 30 - 38 µm | 30 - 38 µm | 50% |
H.C. Starck Amperit® 547.059 Tungsten Carbide-Nickel 88-12 (WC-Ni) |