Physical Properties | Metric | English | Comments |
---|---|---|---|
Specific Gravity | 1.04 g/cc | 1.04 g/cc | 23/23°C; ASTM D792 |
RheTech Products CC20P200-00 20% Calcium Carbonate Reinforced Polypropylene Copolymer, Natural Applications: Electrical housingsDurable goodsInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Specific Gravity | 1.04 g/cc | 1.04 g/cc | ASTM D792 |
SABIC Innovative Plastics Cycolac® MG47F ABS Multi-purpose, injection molding ABS providing a favorable balance of engineering properties. FDA compliant. |
|||
Specific Gravity | 1.04 g/cc | 1.04 g/cc | Mixed; TM R050-16 |
Resinlab® EP1112NC Black Electronic Grade Epoxy Encapsulant Resinlab™ EP1112NC Black is a two part unfilled fast curing electronic grade epoxy encapsulant designed for small to medium sized castings. EP1112NC Black is a modified version of the standard EP11.. |
|||
Specific Gravity | 1.04 g/cc | 1.04 g/cc | |
Mapal Plastics Maplon PAPER MATCH Polypropylene Sheet Paper match is a multi layer graphic sheet. The core layer is a high rigidity PP. The skin layers are high field polyolefine. The surface bonds easily to inks and have some absorbing capacity.Main a.. |
|||
Specific Gravity | 1.04 - 1.07 g/cc | 1.04 - 1.07 g/cc | ASTM D792 |
LG Chemical HF380XC ABS, High Flow, High Surface Gloss Feature: Injection Molding, High Flow, High Surface GlossApplication: High melt flow index is suitable for injection molding of large and complicated part. High thermal stabilities enables to expres.. |
|||
Specific Gravity | 1.04 g/cc | 1.04 g/cc | |
Momentive Performance Materials RTV5818 One-Component, Modified Alkoxy Adhesive Sealant, Translucent RTV5810 Series sealants are neutral cure, one-component, ready to use silicone adhesive sealants that cure to tough resilient silicone rubber on exposure to atmospheric moisture at room temperature... |
|||
Specific Gravity | 1.04 g/cc | 1.04 g/cc | ASTM D792 |
SABIC Innovative Plastics SABIC PPCOMPOUND 9710 PP SABIC® PPcompound 9710 is a mineral filled, impact modified polypropylene TPO. This material combines high impact resistance, scratch resistance, and heat stability with interior automotive UV st.. |
|||
Specific Gravity | 1.04 g/cc | 1.04 g/cc | ASTM D792 |
SABIC Innovative Plastics LNP LUBRILOY RA2 PA 66 LNP* LUBRILOY* RA2 is a compound based on Nylon 66 resin containing Aramid Fiber. Added feature of this material is: Wear Resistant. |
|||
Specific Gravity | 1.04 g/cc @Temperature 22.8 °C |
1.04 g/cc @Temperature 73.0 °F |
ASTM D792 |
Spartech PP5220 Calcium Carbonate Filled Homopolymer Offers improved stiffness versus unfilled materials. They offer substantial improvements in drop weight (Gardner) impact over both unfilled polypropylene and other types of filled polypropylene. Cal.. |
|||
Specific Gravity | 1.04 g/cc @Temperature 22.8 °C |
1.04 g/cc @Temperature 73.0 °F |
ASTM D792 |
Spartech PP7220 Calcium Carbonate Filled High Impact Copolymer Provides the highest level of impact of all copolymers and are useful in applications where improved processing and stiffness are required versus unfilled copolymer materials.Information provided by.. |
|||
Specific Gravity | 1.04 g/cc | 1.04 g/cc | ASTM D792 |
Stratasys® ABSplus ABSplus is up to 40 percent stronger than standard ABS material and is an ideal material for conceptual prototyping through design verification through direct digital manufacturing. The marriage of .. |
|||
Specific Gravity | 1.04 g/cc | 1.04 g/cc | ASTM D792 |
Samsung Cheil Industries Starex® HF-0660I ABS, Unreinforced Material with high flowability and high stiffness that can be used for vacuum cleaner, telephone, TV, VCR, calculator, radio and air-conditionerInformation provided by Samsung Cheil Industries. |
|||
Specific Gravity | 1.04 g/cc | 1.04 g/cc | ASTM D792 |
Stratasys® ABS-M30i ABS-M30i is a high strength material well suited for the medical, pharmaceutical
and food packaging industries. Parts manufactured with ABS-M30i material
are biocompatible (ISO 10993 certified) an.. |
|||
Specific Gravity | 1.04 g/cc | 1.04 g/cc | ASTM D792 |
A. Schulman POLYFORT™ FPP 1236 Glass Filled Chemically Coupled Homopolymer Polypropylene DescriptionPolyfort® FPP 1236 is a 20% glass filled chemically coupled homopolymer polypropylene product. Information provided by A. Schulman. |
|||
Specific Gravity | 1.04 g/cc | 1.04 g/cc | ISO 1183 |
Total Polystyrene Impact 8260 Improved Environmental Stress Crack Resistance High Impact Polystyrene POLYSTYRENE IMPACT 8260 is a high impact polystyrene for extrusion and injection applications. This grade has an improved environmental stress crack resistance in comparison with standard high impa.. |
|||
Specific Gravity | 1.04 g/cc | 1.04 g/cc | ASTM D792 |
A. Schulman POLYFORT™ FTP 3130H-01/FTP 3130HU-Colors DescriptionPolyfort® FTP 3130H-01 (non-UV stabilized) and FTP 3130HU-Colors (UV-stabilized) are high flow injection molding polyolefin alloys which exhibit an exceptional stiffness-impact balance a.. |
|||
Specific Gravity | 1.04 g/cc | 1.04 g/cc | ASTM D792 |
Total PSI 2451 High Heat Resistance Impact Polystyrene Total Petrochemicals Polystyrene 2451 is a high heat resistance, impact polystyrene for injection blow molding, thermoforming. It is recommended for the manufacturing of articles which require good.. |
|||
Specific Gravity | 1.04 g/cc | 1.04 g/cc | |
Dow Corning QP8-5314 INTERMEDIATE Dow Corning QP8-5314 Intermediate was developed specifically as an intermediate for upgrading the weatherability of acrylic emulsions. However, it should work equally well with other emulsion system.. |
|||
Specific Gravity | 1.04 g/cc | 1.04 g/cc | ASTM D792 |
ELASTO UK Dryflex® 400801S SBS Based Material, 80A Hardness, Natural The 400S-series is a good alternative for indoor applications and disposable articles that do not have high requirements for ageing and heat resistance. The raw materials are specially selected for.. |
|||
Specific Gravity | 1.04 g/cc | 1.04 g/cc | ASTM D792 |
ELASTO UK Dryflex® 400901S SBS Based Material, 90A Hardness, Natural The 400S-series is a good alternative for indoor applications and disposable articles that do not have high requirements for ageing and heat resistance. The raw materials are specially selected for.. |
|||
Specific Gravity | 1.04 g/cc | 1.04 g/cc | ASTM D792 |
ELASTO UK Dryflex® 422451S SBS Based Material, 45D Hardness, Black The 400S-series is a good alternative for indoor applications and disposable articles that do not have high requirements for ageing and heat resistance. The raw materials are specially selected for.. |
|||
Specific Gravity | 1.04 g/cc @Temperature 25.0 °C |
1.04 g/cc @Temperature 77.0 °F |
|
Dow Corning Z-6172 SILANE Dow Corning® Z-6172 Silane is an organofunctional reactive silane. The product has a vinyl reactive organic group and a 2-methoxyethoxysilyl reactive inorganic group. Dow Corning® Z-6172 Silane ha.. |
|||
Specific Gravity | 1.04 g/cc | 1.04 g/cc | ASTM D792 |
Diamond Polymers ABS 3501 Black 1302 Injection Molding Grade Information Provided by Diamond Polymers, Inc. & Network Polymers, Inc. |
|||
Specific Gravity | 1.04 g/cc | 1.04 g/cc | ASTM D792 |
Diamond Polymers ABS 7502 Description: Injection Molding Grade, Extra High ImpactInformation provided by Diamond Polymers, Inc. |
|||
Specific Gravity | 1.04 g/cc | 1.04 g/cc | ASTM D792 |
Americas Styrenics EA3130 High Heat Crystal Polystyrene Product CharacteristicsAdditive FreeFood Contact CompliantTypical ApplicationsMedical PartsColor Concentrate CarrierLow Profile AdditivesInformation provided by AmericasStyrenics LLC. |
|||
Specific Gravity | 1.04 g/cc | 1.04 g/cc | ASTM D792 |
Americas Styrenics STYRON A-TECH® 1400AS High Impact Polystyrene Product CharacteristicsHigh FlowGood ImpactFood Contact CompliantTypical ApplicationsTelevision housingsPrinter HousingsConsumer goodsInformation provided by AmericasStyrenics LLC. |
|||
Specific Gravity | 1.04 g/cc | 1.04 g/cc | ASTM D792 |
Aaron Industries AAROPRENE® TFPP 2020 Talc Filled Polypropylene AAROPRENE® TFPP 2000 Series Talc Reinforced CompoundsMelt flow index may be specified. Color may be specified. |
|||
Specific Gravity | 1.04 g/cc | 1.04 g/cc | Uncatalyzed, DBT Catalyst |
ACC QSil 40 QSI Quantum Silicones 40 Durometer Condensation Cure for Potting QSil 40 is a general purpose two-part, room temperature, condensation cure siloxane elastomer. The two applicable catalysts are 0.5% DBT by weight and 10% Deep Section Catalyst by weight. Cure speed.. |
|||
Specific Gravity | 1.04 g/cc | 1.04 g/cc | ASTM D792 |
A. Schulman POLYFLAM™ E-15086-1B Mineral Impact Modified, Low Warp Polypropylene Black DescriptionPolyfort® E-15086-1B is a mineral impact modified low warp polypropylene black.Information provided by A. Schulman. |
|||
Specific Gravity | 1.04 g/cc | 1.04 g/cc | Part B; TM R050-16 |
Resinlab® UR3001HP Clear Urethane Encapsulant Resinlab™ UR3001HP Clear is a clear, two component, room temperature curing urethane encapsulating system. It is designed to cure completely at room temperature. UR3001HP Clear provides excellent e.. |