Physical Properties | Metric | English | Comments |
---|---|---|---|
Viscosity | 500 cP @Temperature 25.0 °C |
500 cP @Temperature 77.0 °F |
Uncured |
Permabond HM128 Anaerobic Threadlocker Permabond® HM128 Threadlocker is a high strength adhesive for permanent assembly. It is typically used for preventing vibration loosening of bolts, studs and cap screws. Full cure to a cross-linked.. |
|||
Viscosity | 500 cP @Temperature 25.0 °C |
500 cP @Temperature 77.0 °F |
Uncured |
Permabond HM129 Anaerobic Threadlocker Permabond® HM129 is a high strength medium viscosity anaerobic threadlocker and sealant. This material cures in the absence of air between tight fitting metal parts. Cure is fast and reliable on st.. |
|||
Viscosity | 500 cP | 500 cP | Part B |
Resinlab® EP324E Clear Two Part Epoxy Casting Resin Resinlab™ EP 324E Clear is a two part unfilled electronic grade epoxy encapsulant designed for medium sized castings. It cures at room temperature to a tough, semi-rigid polymer. It has good wettin.. |
|||
Viscosity | 500 cP | 500 cP | |
Resinlab® CYNERGY CA6304 Adhesive Description: The CYNERGY 6300 SERIES products are for use in applications where a faster set time is desired or low moisture conditions exist. Provides good bonds to a wide variety of materials.Appl.. |
|||
Viscosity | 500 cP | 500 cP | |
Resinlab® CYNERGY CA6603 Adhesive Description: The CYNERGY 6600 SERIES are modified to provide greatly reduced odor and frosting of plastics. These products are ideal for bonding dissimilar materials with excellent performance on a .. |
|||
Viscosity | 500 - 900 cP | 500 - 900 cP | |
Huntsman HY 955 Polyamide Approx. H+ equivalent weight 65. Mix Ratio with GY 6010 is 35.Comments/Applications: Modified liquid amidoamine, low viscosity. Adhesives, coatings, flooring, potting and we lay-up applications. .. |
|||
Viscosity | 500 cP @Temperature 25.0 °C |
500 cP @Temperature 77.0 °F |
|
Silikony Polskie Polsil OM 500 Methyl Silicone Fluid The methyl silicone fluids are liquid organic silicone polymers, including inorganic elements (Si-O bond, as in quartz, glass or sand) and inorganic elements (methyl groups) in one molecule. This gi.. |
|||
Viscosity | 500 - 1200 cP | 500 - 1200 cP | #2 SP. @30 RPM; RP-0659 |
Solvay ALKASPERSE® A-5H Surfactant Chemical Name: PARTIAL SODIUM SALT OF POLYACRYLIC ACIDCAS: 9003-01-4, 9003-04-7 Available in: Asia Pacific, Europe, Latin America and North AmericaApplications: ALKASPERSE© A-5H is a solid disper.. |
|||
Viscosity | 500 - 10000 cP | 500 - 10000 cP | #2 SP @ 12 rpm; RP-0596 |
Solvay MIRANOL® C2M CONC NP Surfactant Description: A mild amphoteric surfactant that provides exceptional foam quality and reduction in irritation when used in combination with anionic surfactants. Synergy with conditioning polymers.Che.. |
|||
Viscosity | <= 500 cP | <= 500 cP | RP-17619 |
Solvay RHODACAL® A-246/L Surfactant Description: X High-foaming detergent and emulsifier. Alkali stable. Also used as a foam booster, dispersant and wetter in dishwashing, car- wash products and general- purpose cleaners.Chemical Name.. |
|||
Viscosity | 500 - 2500 cP | 500 - 2500 cP | Milled Cement; Zeon Test #327 |
Zeon Chemicals Nipol® 1031 Nitrile Elastomer Nipol 1031 is a copolymer of butadiene and acrylonitrile with very high oil resistance. Sufficient non-staining antioxidant is added during manufacture for normal storage conditions.Excellent fuel a.. |
|||
Viscosity | 500 cP @Temperature 25.0 °C |
500 cP @Temperature 77.0 °F |
After mixing |
Tra-Con Tra-Cast 3010 Flexible Clear Epoxy Casting Compound TRA-CAST 3010 is a clear, low viscosity epoxy casting compound recommended for industrial embedding and casting applications where its combination of superior properties, good clarity, long pot life.. |
|||
Viscosity | 500 - 2000 cP | 500 - 2000 cP | dynamic |
Dow Corning RD ANTIFOAM EMULSION 10 percent active silicone emulsion designed to control foam in aqueous systems over wide pH ranges.Information provided by Dow Corning |
|||
Viscosity | 500 cP | 500 cP | Dynamic |
Dow Corning SYL-OFF® PMCP7137 High Speed Crosslinker Syl-Off® 7137 High Speed Crosslinker is a 100% active solids crosslinker additive. Recommended for high speed coating conditions where generation of silicone mist is an issue.Information provided b.. |
|||
Viscosity | 500 cP | 500 cP | |
Elmer's Products Aron Alpha® 252F Cyanoacrylate Adhesive (Industrial Krazy Glue™) Surface insensitive adhesives, ultra-fast setting for porous, soft or tough-to-bond substrates. Series 200TX & Gel: No run, no stringing, excellent gap filling characteristics with good strength on.. |
|||
Viscosity | 500 cP | 500 cP | dynamic |
Dow Corning 3-4170 DIELECTRIC GEL KIT Two-part, clear, heat cure, long working time.Information provided by Dow Corning |
|||
Viscosity | 500 - 2500 cP @Temperature 25.0 °C |
500 - 2500 cP @Temperature 77.0 °F |
spindle n 3-10 RPM; MA143LFE |
C.O.I.M. FILCO® 650 Film Former for Glass Fiber Sizes Description: Film Former for Glass Fiber SizesGeneral Information: COIM has developed a range of polyesters for the treatment of glass fiber. These polyesters come in powder and emulsion form and ar.. |
|||
Viscosity | 500 cP | 500 cP | |
ACC QLE 1050 QSI Quantum Silicones 30 Durometer Clear, Addition Cure, 1-part Elastomer for Coating QLE 1050 is a 100% silicone solids elastomer designed for use as a conformal coating, but can also be used for cloth coating applications. Key Features: 100% solids Transparent, ideal for pigmentat.. |
|||
Viscosity | 500 cP | 500 cP | Uncatalyzed, QM 270B |
ACC QM 270 QSI Quantum Silicones 70 Durometer Addition Cure Moldmaking Material QM 270 is a two component, room temperature addition cure silicone material. The cured rubber has excellent mechanical properties, good shelf-life stability, excellent physical properties and resin .. |
|||
Viscosity | 500 - 700 cP | 500 - 700 cP | |
Aremco Corr-Paint™ CP4060-S High Temperature Protective Coating, Silicone-Polyester |
|||
Viscosity | 500 - 700 cP | 500 - 700 cP | |
Aremco Corr-Paint™ CP4095 High Temperature Protective Coating Silicone, Aluminum Filled This silicone-based, heat resistant coatings are formulated using a state-of-the-art, VOC-compliant, water-dispersible silicone resin. CP4000 adheres to metals, ceramics, refractories, and quartz, a.. |
|||
Viscosity | 500 cP | 500 cP | |
Aremco Crystalbond™ 555 Washaway Mounting Adhesive & Accessory Low melting point adhesive systems for moderate-stress machining processes, dry plasma etching of silicon wafers and de-paneling copper plated Teflon boards. Transparent in thin cross-sections. Solu.. |
|||
Viscosity | 500 - 3000 cP @Shear Rate 1.00e+10 1/s, Temperature 20.0 °C |
500 - 3000 cP @Shear Rate 1.00e+10 1/s, Temperature 68.0 °F |
|
Kraton® NEXAR™ MD9150 Polymer Barrier Membrane Solution NEXAR™ sulfonated block copolymer membranes are designed for water transport, filtration and separation. They have a high moisture vapor transportation rate, allowing usage in humidification and d.. |
|||
Viscosity | 500 cP @Temperature 25.0 °C |
500 cP @Temperature 77.0 °F |
Uncured |
Permabond A113 Anaerobic Threadlocker Designed for the locking and sealing of metal parts, Permabond® A113 is ideally suited for use on components that need to be dismantled for maintenance. Giving vibration resistance it can be used .. |