Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Flexural Strength | 20.0 MPa | 2900 psi | STN EN ISO 178 |
Plastcom PLASTALEN® PH 91 SDU Polypropylene Modified homopolymer PP for injection molding. General use in all industry branches. Delivered in natural mode and in full RAL color.Information Provided by Plastcom spol. s r.o. |
|||
Flexural Strength | 20.0 MPa | 2900 psi | |
Quadrant EPP TIVAR® 1000 EC PE-UHMW + specific additives (ISO Data) TIVAR 1000 EC is a PE-UHMW grade containing specific additives rendering this material a lower surface resistivity than TIVAR 1000 antistatic, improving electrical conductivity and UV-resistance |
|||
Flexural Strength | 20.0 MPa | 2900 psi | conditioned, 2 mm/min; ISO 178-A |
Lanxess Durethan® BC 550 DUSXBL 900116 Nylon 6 PA 6, non-reinforced, extrusion, Blastorm, impact modified, heat-ageing stabilizedInformation provided by LANXESS. |
|||
Flexural Strength | 20.0 MPa | 2900 psi | ASTM D790 |
SABIC Innovative Plastics LNP LUBRICOMP FL004 PE LNP* Lubricomp* FL004 is a compound based on Polyethylene resin containing 20% PTFE. Added features of this material include: Internally Lubricated. |
|||
Flexural Strength | 20.0 MPa | 2900 psi | ASTM D790 |
SABIC Innovative Plastics LNP THERMOCOMP TH0815A PUR (Asia Pacific) LNP* THERMOCOMP* TH0815A is a compound based on Polyurethane resin containing High Specific Gravity Filler. Added features of this material include: High Specific Gravity. |
|||
Flexural Strength | 20.0 MPa | 2900 psi | ASTM D790 |
A. Schulman POLYFORT™ PP 3701 Information provided by A. Schulman. |
|||
Flexural Strength | 20.0 MPa | 2900 psi | ISO 178 |
Borealis Daplen™ ED206HP TPO Compound Daplen ED206HP is a 25% mineral reinforced compound intended for injection molding. ED206HP has been developed especially for the car industry, to be used in interior parts requiring excellent scra.. |
|||
Flexural Strength | 20.0 MPa | 2900 psi | ASTM D790 |
UBE UBESTA® 3030JFX1 Plasticized Industrial Grade Nylon 12 Description: UBE UBESTA® Industrial grade Nylon 12Comments: UV resistance, heat resistanceInformation provided by UBE. |
|||
Flexural Strength | 20.0 MPa | 2900 psi | ASTM D790 |
A. Schulman POLYFORT™ PP 3701 Information provided by A. Schulman. |
|||
Flexural Strength | 20.0 MPa | 2900 psi | ASTM D790 |
Ensinger Tecatron® XP-79 Compression Molded PPS Compound, 70% PTFE Filled Seal Material Ensinger Special Polymers has over twenty different grades of TECATRON PPS available. Custom formulations can be blended to suit specific applications. Compression molding is amenable to short run p.. |
|||
Flexural Strength | >= 20.0 MPa | >= 2900 psi | high temp bending |
China-Yixing Longly Refractories ASM-125 Cordierite-Mullite Featured mullite, cordierite as the main raw material, the use of advanced production technology, professionally manufacturing the kiln furniture of ceramic and powder metallurgy with load bearing b.. |
|||
Flexural Strength | 20.0 MPa | 2900 psi | ASTM D790 |
Aclo Accutech Polypropylene Copolymer CP0437T30L1 Talc Reinforced |
|||
Flexural Strength | 20.0 MPa | 2900 psi | ASTM D790 |
Aclo Accutech Polypropylene Copolymer CP0437W20L1 Wollastonite Reinforced |
|||
Flexural Strength | 20.0 MPa | 2900 psi | ASTM D790 |
Aclo Accutech Polypropylene Copolymer CP0437W40L1 Wollastonite Reinforced |
|||
Flexural Strength | 20.0 MPa @Temperature 93.0 °C |
2900 psi @Temperature 199 °F |
ASTM Test |
BASF Ultramid® 8202 PA6 (Dry) Ultramid 8202 is a low viscosity, general purpose polyamide 6 injection molding homopolymer exhibiting excellent melt fluidity for filling thin sections. It is also available in heat stabilized (Ult.. |
|||
Flexural Strength | 20.0 MPa @Temperature 93.0 °C |
2900 psi @Temperature 199 °F |
ASTM Test |
BASF Ultramid® 8270 HS PA6 (Dry) Ultramid 8270 HS is a thermally modified PA6 blow molding compound exhibiting exceptional toughness and melt strength ideally suited for blow molding, profile extrusion, and other applications requi.. |
|||
Flexural Strength | 20.0 MPa @Temperature 65.0 °C |
2900 psi @Temperature 149 °F |
ASTM Test |
BASF Ultramid® 8350 HS PA6 (Dry) Ultramid 8350 HS is a heat stabilized, impact modified type 6 graft copolymer developed for extrusion, tubing, and jacketing applications requiring a high level of toughness combined with a moderate.. |
|||
Flexural Strength | 20.0 - 34.0 MPa @Strain 5.00 % |
2900 - 4930 psi @Strain 5.00 % |
ASTM D790 |
Arkema Group KYNAR FLEX® 2850-02 Polyvinylidene Fluoride Copolymer - Extrusion Characteristics: Natural resin - translucent, off-white hemispheres. 150°C Temperature rating. High stability in harsh thermal, chemical and ultraviolet environments. High toughness and mechani.. |
|||
Flexural Strength | 20.0 - 34.0 MPa @Strain 5.00 % |
2900 - 4930 psi @Strain 5.00 % |
ASTM D790 |
Arkema Group KYNAR FLEX® 2850-04 Polyvinylidene Fluoride Copolymer - Extrusion & Molding Characteristics: Natural resin - translucent, off-white hemispheres. 150°C Temperature rating. High stability in harsh thermal, chemical and ultraviolet environments. High toughness and mechani.. |
|||
Flexural Strength | 20.0 - 34.0 MPa @Strain 5.00 % |
2900 - 4930 psi @Strain 5.00 % |
ASTM D790 |
Arkema Group KYNAR FLEX® 3120-15 Polyvinylidene Fluoride Copolymer - Extrusion & Molding Characteristics: Natural resin - translucent, off-white hemispheres. Flexible, flame and smoke suppressant. High stability in harsh thermal, chemical and ultraviolet environments. High toughness.. |
|||
Flexural Strength | 20.0 - 34.0 MPa @Strain 5.00 % |
2900 - 4930 psi @Strain 5.00 % |
ASTM D790 |
Arkema Group KYNAR FLEX® 3120-50 Polyvinylidene Fluoride Copolymer - Extrusion & Molding Characteristics: Natural resin - translucent, off-white hemispheres. Flexible, 150°C temperature rating. High stability in harsh thermal, chemical and ultraviolet environments. High toughness a.. |
|||
Flexural Strength | 20.0 MPa @Temperature 65.0 °C |
2900 psi @Temperature 149 °F |
ASTM Test |
BASF Ultramid® 8281 HS PA6 (Dry) |
|||
Flexural Strength | 20.0 MPa | 2900 psi | ISO 178 |
Ascend Performance Materials Vydyne® 50BW Nylon 66, Conditioned (2.5% Moisture) Vydyne® 50BW is a general purpose Nylon 66 resin. Available in natural. Designed for extrusion applications that do not require use of a high-viscosity resin. This resin offers a well-balanced comb.. |
|||
Flexural Strength | 20.0 MPa | 2900 psi | ASTM D790 |
A. Schulman POLYFORT™ PP 3701 Information provided by A. Schulman. |
|||
Flexural Strength | 20.0 - 34.0 MPa @Strain 5.00 % |
2900 - 4930 psi @Strain 5.00 % |
ASTM D790 |
Arkema Group KYNAR FLEX® 2800-20 Polyvinylidene Fluoride Copolymer - Extrusion & Molding Characteristics: Natural resin - translucent, off-white hemispheres. Flexible. High stability in harsh thermal, chemical and ultraviolet environments. High toughness and mechanical strength, low.. |
|||
Flexural Strength | 20.0 - 34.0 MPa @Strain 5.00 % |
2900 - 4930 psi @Strain 5.00 % |
ASTM D790 |
Arkema Group KYNAR FLEX® 2850-00 Polyvinylidene Fluoride Copolymer - Extrusion & Molding Characteristics: Natural resin - translucent, off-white hemispheres. 150°C Temperature rating. High stability in harsh thermal, chemical and ultraviolet environments. High toughness and mechani.. |
|||
Flexural Strength | 20.0 MPa | 2900 psi | ASTM D 790 |
SABIC Innovative Plastics LNP Stat-kon MD000IU PP LNP* Stat-kon* MD000IU is a compound based on Polypropylene resin containing Carbon Powder. Added features of this material include: Electrically Conductive, High Impact, UV Stabilized.This data wa.. |
|||
Flexural Strength | 20.0 MPa | 2900 psi | ASTM D 790 |
SABIC Innovative Plastics LNP Stat-kon MD000IU PP (Asia Pacific) LNP* Stat-kon* MD000IU is a compound based on Polypropylene resin containing Carbon Powder. Added features of this material include: Electrically Conductive, High Impact, UV Stabilized.This data wa.. |
|||
Flexural Strength | 20.0 MPa | 2900 psi | SAE J949 |
Azdel SuperLite® SL551400-100 PP Resin Matrix / 55% Glass Fiber (3 mm Molded Thickness) AZDEL SuperLite® SL551400-100 is a low pressure, thermoformable, thermoplastic composite of polypropylene and long chopped glass fibers. Usually combined with outer layers as needed for the applic.. |