Polymer Property : Charpy Impact, Notched = 8.00 J/cm² Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Charpy Impact, Notched	>= 8.00 J/cm²	>= 38.1 ft-lb/in²	ISO 179
Murtfeldt Material ”S”® 1000 Green Polyethylene Material ”S”® 1000 is exclusively produced from ultra-high molecular weight polyethylene powder that is mixed with finely milled Original Material ”S”®. The fine milled material is compressio..
Charpy Impact, Notched	>= 8.00 J/cm²	>= 38.1 ft-lb/in²	ISO 179
Murtfeldt Material ”S”® 1000 RB Polyethylene, High Friction An elastomer in Material ”S”® 1000 RB gives it high impact resistance and skid resistance.Special Properties:• High coefficient of friction• Good wear and abrasion resistanceInformation provide..
Charpy Impact, Notched	8.00 J/cm²	38.1 ft-lb/in²	ISO179/3C DIN.53453
Omnia Plastica PE 1000 - Polyethylene 1000 Polyethylene with a molecular weight of ± 1000,000 with excellent impact strength. PE 1000 is less rigid and has a higher shock resistance than the low molecular weight polyethylene and it is there..
Charpy Impact, Notched	8.00 J/cm²	38.1 ft-lb/in²	ISO179/3C DIN.53453
Omnia Plastica PEEK Polyetheretherketone Semicrystalline polymer. Material with high mechanical and thermal properties, up to 240°C. It resists to creep under load and to wear, its friction coefficient is low. The temperature resistance w..
Charpy Impact, Notched	8.00 J/cm²	38.1 ft-lb/in²	ISO179/3C DIN.53453
Omnia Plastica PEI Polyetherimide This high performance engineering plastic is a non-reinforced self-extinguishing amorphous polymer with high thermal, electrical and mechanical properties which are typical of a crystalline polymer...
Charpy Impact, Notched	8.00 J/cm²	38.1 ft-lb/in²	Edgew 80103 sp=62mm; ISO 179/1eA
SABIC Innovative Plastics Lexan® 133R PC (Europe-Africa-Middle East) LEXAN 133R is the highest viscosity, UV stabilized, release containing, linear polycarbonate grade. Suitable for injection molding and extrusion processes. Available in transparent and multiple colo..
Charpy Impact, Notched	8.00 J/cm²	38.1 ft-lb/in²	Partial Break; ISO 179-1/1eA
Quadrant EPP TIVAR® Oil Filled PE-UHMW + oil (ISO Data) TIVAR Oil Filled is a self-lubricating PE-UHMW material in the real meaning of the word. Next to an enhanced wear resistance, the incorporated and evenly dispersed oil renders this material a consid..
Charpy Impact, Notched	8.00 J/cm²	38.1 ft-lb/in²	Edgew 80103 sp=62mm; ISO 179/1eA
SABIC Innovative Plastics Lexan® HFD1413 PC Copolymer (Asia Pacific) 11 MFR LEXAN High Flow Ductile Copolymer
Charpy Impact, Notched	8.00 J/cm²	38.1 ft-lb/in²	Edgew 80103 sp=62mm; ISO 179/1eA
SABIC Innovative Plastics Lexan® HFD1433 PC Copolymer 11 MFR LEXAN High Flow Ductile Copolymer UV stabilized, available in transparent colors only
Charpy Impact, Notched	8.00 J/cm²	38.1 ft-lb/in²	Edgew 80103 sp=62mm; ISO 179/1eA
SABIC Innovative Plastics Lexan® HFD1433 PC Copolymer (Asia Pacific) 11 MFR LEXAN High Flow Ductile Copolymer UV stabilized
Charpy Impact, Notched	8.00 J/cmÂ²	38.1 ft-lb/inÂ²	ISO 179
Menzolit MenzolitÂ® SMC 1500 Unsaturated Polyester UP SMC 1500 is a special SMC for applications calling for high continuous service temperature. The glass level has been selected to combine good mouldability with good strength and stiffness properties..
Charpy Impact, Notched	8.00 J/cmÂ²	38.1 ft-lb/inÂ²
LATI Latamid 6 H2E04 G/30 PA 6, 30% Glass Fiber Reinforced, Heat Stabilized Polyamide 6 (PA6) based compound. Heat stabilized. Toughened. Glass fibers. Good elongation.Availability: Africa & Middle East; Asia Pacific; Europe; Latin America; North AmericaInformation provided..
Charpy Impact, Notched	8.00 J/cmÂ²	38.1 ft-lb/inÂ²	ISO 179
Teijin Multilon T-3011 Standard PC/ABS Polymer Alloy General grade of PC/ABS polymer alloy, having improved impact strength and heat resistance compared with a heat resistant ABS and flame retardant m-PPE and also having higher fluidity compared with ..
Charpy Impact, Notched	8.00 J/cmÂ²	38.1 ft-lb/inÂ²	ISO 179
Teijin Multilon T-3713 Standard PC/ABS Polymer Alloy General grade of PC/ABS polymer alloy, having improved impact strength and heat resistance compared with a heat resistant ABS and flame retardant m-PPE and also having higher flowability compared wi..
Charpy Impact, Notched	8.00 J/cmÂ²	38.1 ft-lb/inÂ²	ISO 179
Styrolution TerblendÂ® N NM-13 ABS/PA6 (Dry) Terblend N NM-13 is a new experimental ABS/PA6-Blend with improved impact strength at low temperatures. It can be easily processed on any standard injection molding machine.Information provided by ..
Charpy Impact, Notched	8.00 J/cmÂ²	38.1 ft-lb/inÂ²	ISO Data
Styron CALIBREâ„¢ 300 15 Polycarbonate, General Purpose CALIBREÂ® 300 series are general purpose, UL listed polycarbonate resins. CALIBRE 300 series resins exhibit an excellent physical property balance of heat resistance, transparency and impact stren..
Charpy Impact, Notched	8.00 - 10.0 J/cm²	38.1 - 47.6 ft-lb/in²	DIN 53453
Zell-Metall Engineering Plastics Zellamid 1100 OIL Zellamid® 1100 OIL: A new type of cast nylon produced by addition of a special oil to the polymer structure. By laboratory test it was proven that this second generation oil filled product reduces ..
Charpy Impact, Notched	8.00 J/cm²	38.1 ft-lb/in²	ISO 179-1
Total Lumicene® mPE M 3509 Medium Density Polyethylene, Blow Molding Lumicene® mPE M 3509 is a metallocene-based medium density polyethylene combining the features of conventional blow molding polyethylene with differentiated optical propertied such as gloss and co..
Charpy Impact, Notched	8.00 J/cm²	38.1 ft-lb/in²	ISO 179/1eA
DuPont Performance Polymers Delrin® 100ST BK602 Acetal (POM) (Unverified Data**) Super Toughened High Viscosity Acetal Homopolymer Delrin 100ST BK602 is a super tough high viscosity acetal homopolymer grade with superior impact resistance. It is designed for highly stressed part..
Charpy Impact, Notched	8.00 J/cm²	38.1 ft-lb/in²	DAM; ISO 179/1eA
DuPont Performance Polymers Zytel® ST7301 NC010 Nylon 6 (Unverified Data**) Super Toughened Polyamide 6 Zytel ST7301 NC010 is a Super Tough heat stabilized lubricated polyamide 6 resin for injection molding and extrusion. It offers outstanding impact resistance over a wide ..
Charpy Impact, Notched	8.00 J/cm²	38.1 ft-lb/in²	DAM; ISO 179/1eA
DuPont Performance Polymers Zytel® ST801 BK010A Nylon 66 (Unverified Data**) Super Toughened Polyamide 66 Information provided by DuPont Performance Polymers
Charpy Impact, Notched	8.00 J/cm²	38.1 ft-lb/in²	DAM; ISO 179/1eA
DuPont Performance Polymers Zytel® ST801 NC010A Nylon 66 (Unverified Data**) Super Toughened Polyamide 6 Zytel ST801 is an unreinforced super tough polyamide 66 for injection molding and extrusion. It offers outstanding break resistance over a wide temperature and humidity r..
Charpy Impact, Notched	8.00 J/cm²	38.1 ft-lb/in²
Akro-Plastic Akromid® A3 4 S1 PA, Cold-Impact Resistant (discontinued **) The outstanding characteristic is the reduction of the normally common cooling brittleness at low temperatures. Here, AKROMID A has set a course with special combinations like high heat stabilizatio..
Charpy Impact, Notched	8.00 J/cm²	38.1 ft-lb/in²	ISO 179-1
Unitika ET2025 PA6, Dry High-impact nylonInformation provided by Unitika Ltd.
Charpy Impact, Notched	8.00 J/cm²	38.1 ft-lb/in²	Edgew 80103 sp=62mm; ISO 179/1eA
SABIC Innovative Plastics Lexan® HFD1433 PC Copolymer (Europe-Africa-Middle East) 11 MFR LEXAN High Flow Ductile Copolymer UV stabilized, available in transparent colors only
Charpy Impact, Notched	8.00 J/cm² @Temperature 30.0 °C	38.1 ft-lb/in² @Temperature 86.0 °F	dry; ISO 179/1eU
EMS-Grivory Grivory® L 25A NZ PA12-I Product Description: Grilamid L 25A NZ is a high viscosity extrusion grade Polyamide 12 (PA12). Grilamid L 25A NZ is hydrolysis and heat stabilized and impact modified. The main features of Grilamid..
Charpy Impact, Notched	8.00 J/cm² @Temperature 23.0 °C	38.1 ft-lb/in² @Temperature 73.4 °F	DAM; ISO 179/1eA
DuPont Performance Polymers Zytel® HTN FE8200 BK431 Polyphthalamide (PPA) (Unverified Data**) Zytel® HTNFE8200 BK431 is an unreinforced, toughened, heat stabilized, lubricated high performance polyamide resin for injection molding. It is also a PPA resin.Information provided by DuPont Perfo..