Polymer Property : Film Tensile Strength at Break, MD = 25.0 MPa Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Film Tensile Strength at Break, MD	25.0 MPa	3630 psi	ISO 527-3
Polimeri Europa Flexirene® CM 50 Butene Copolymer Linear Low Density Polyethylene Flexirene CM 50 is a butene copolymer with medium density (C4-LLDPE), with antioxidants, suitable for cast film extrusion.Main Applications: Flexirene CM 50 is a highly stiff product and it is reco..
Film Tensile Strength at Break, MD	25.0 MPa	3630 psi	ISO 527-3
Polimeri Europa Riblene® FC 20 Low Density Polyethylene - Blown Film Extrusion Riblene FC 20 is a high molecular weight low density polyethylene resin (LDPE) suitable for blown film extrusion. Riblene FC 20 is characterized by a high melt strength leading to a good bubble sta..
Film Tensile Strength at Break, MD	25.0 MPa	3630 psi	ISO 527-3
Polimeri Europa Riblene® FF 20 Low Density Polyethylene - Blown Film Extrusion Riblene FF 20 is a high molecular weight low density polyethylene (LDPE) suitable for blown film extrusion. Riblene FF 20 is characterized by a good melt strength leading to a good bubble stability..
Film Tensile Strength at Break, MD	25.0 MPa	3630 psi	ISO 527-3
Polimeri Europa Riblene® FF 24 Low Density Polyethylene - Blown Film Extrusion Riblene FF 24 is a high molecular weight low density polyethylene (LDPE), with added slip and antiblocking agents, suitable for blown film extrusion. Riblene FF 24 is characterized by a good melt s..
Film Tensile Strength at Break, MD	25.0 MPa	3630 psi	ISO 527-3
Polimeri Europa Riblene® FH 20 Low Density Polyethylene - Blown Film Extrusion Riblene FH 20 is a low density polyethylene (LDPE) suitable for blown film extrusion. Riblene FH 20 is characterized by a good balance between processability and mechanical properties.Films manufac..
Film Tensile Strength at Break, MD	25.0 MPa	3630 psi	ISO 527-3
Polimeri Europa Riblene® FL 24 Low Density Polyethylene - Blown Film Extrusion Riblene FL 24 is a low density polyethylene (LDPE) with added slip and antiblocking agents, suitable for blown film extrusion. Riblene FL 24 is characterized by a good balance between processabilit..
Film Tensile Strength at Break, MD	25.0 MPa	3630 psi	ISO 527
Premix Thermoplastics PRE-ELEC® PP 1386 PRE-ELEC PP 1386 is a conductive thermoplastic compound based on polypropylene. Conductivity is achieved by using special conductive carbon black. In addition to a low electrical resistivity PRE-ELE..
Film Tensile Strength at Break, MD	25.0 MPa @Thickness 0.400 mm	3630 psi @Thickness 0.0157 in	ISO 527
Premix Thermoplastics PRE-ELEC® PP 1391 Conductive Thermoplastic Compound PRE-ELEC® PP 1391 is a conductive thermoplastic compound based on polypropylene. Conductivity is achieved by using special conductive carbon black. In addition to a low electrical resistivity PRE-E..
Film Tensile Strength at Break, MD	25.0 MPa @Thickness 0.400 mm	3630 psi @Thickness 0.0157 in	ISO 527
Premix Thermoplastics PRE-ELEC® PP 1397 Conductive Thermoplastic Compound PRE-ELEC® PP 1397 is a conductive thermoplastic compound based on polypropylene. Conductivity is achieved by using special conductive carbon black. In addition to a low electrical resistivity PRE-E..
Film Tensile Strength at Break, MD	25.0 MPa	3630 psi	ASTM D882
Petroquimica Triunfo Trithene® TS 4016 LDPE and LLDPE Blend - Film The Trithene® TS 4016 resin is a mixture of low-density polyethylene (LDPE) with linear low-density polyethylene (LLDPE) designed to meet the needs of the technical films segment for the use of aut..
Film Tensile Strength at Break, MD	25.0 MPa	3630 psi	ISO 527-3
Polimeri Europa Greenflex® FD 23 Ethylene Vinyl Acetate Copolymer - Blown Film Extrusion Greenflex FD 23 is an ethylene vinyl acetate copolymer (EVA) suitable for blown film extrusion. Greenflex FD 23 is a version of Greenflex FD 20 with added slip and antiblocking agents. Films produ..
Film Tensile Strength at Break, MD	25.0 MPa	3630 psi	ASTM D882
ExxonMobil LD 117.03 Blown Overwrap Film Resin (discontinued **) LD 117 resins are homopolymer film resins with good clarity and excellent stiffness. Film from LD 117 resins can be used in overwrap applications and push-through type packaging equipment. Film ma..
Film Tensile Strength at Break, MD	25.0 MPa	3630 psi	ASTM D882
ExxonMobil LD 117.08 Blown Overwrap Film Resin (discontinued **) LD 117 resins are homopolymer film resins with good clarity and excellent stiffness. Film from LD 117 resins can be used in overwrap applications and push-through type packaging equipment. Film ma..
Film Tensile Strength at Break, MD	25.0 MPa	3630 psi	ASTM D882
ExxonMobil Escorene® LD-104 LDPE Packaging Film Resin, High Clarity (discontinued **) Data provided by the manufacturer, Exxon Chemical.A homopolymer packaging film resin with excellent clarity and good stiffness. It is excellent either blown film or chill roll casting equipment. I..
Film Tensile Strength at Break, MD	25.0 MPa	3630 psi	ASTM D882
Huntsman PE1651 EVA Film Extrusion (discontinued **) 6.5% Vinyl Acetate EVA copolymer and FDA compliantFeatures: Yields film with outstanding low temperature strength, excellent clarity, and good heat seal.Applications: Film extrusion: ice bags, liqui..
Film Tensile Strength at Break, MD	25.0 MPa	3630 psi	ASTM D882
ExxonMobil Escorene® LD-129 MDPE Cast Overwrap Film Resin (discontinued **) Data provided by the manufacturer, Exxon Chemical.A homopolymer film resin with good clarity and excellent stiffness. Film made from LD-129 can be used in overwrap applications and in push-through ..
Film Tensile Strength at Break, MD	25.0 - 52.0 MPa	3630 - 7540 psi	Average value: 36.6 MPa Grade Count:80
Overview of materials for Linear Low Density Polyethylene (LLDPE)/Butene, Film This property data is a summary of similar materials in the MatWeb database for the category "Linear Low Density Polyethylene (LLDPE)/Butene, Film". Each property range of values reported is minimum..
Film Tensile Strength at Break, MD	25.0 - 57.0 MPa	3630 - 8270 psi	Average value: 47.0 MPa Grade Count:6
Overview of materials for Cyclo Olefin Polymer This property data is a summary of similar materials in the MatWeb database for the category "Cyclo Olefin Polymer". Each property range of values reported is minimum and maximum values of appropria..
Film Tensile Strength at Break, MD	25.0 MPa	3630 psi	ASTM D882
Metabolix M-veraâ„¢ B5008 Film Grade Compostable Bioplastic B5008 is a compostable film product with 30% biobased carbon content that is ideal for compost bags and can liners used for organic waste diversion and for shopping and retail bags.Features:Meets re..
Film Tensile Strength at Break, MD	25.0 MPa	3630 psi	ISO 527-3
Borealis Borseal™ RE939CF Polypropylene Copolymer Borseal™ RE939CF is a random copolymer. This grade is suitable for the manufacturing of unoriented films on chill roll processes. Applications: Borseal™ RE939CF is designed for: Food packaging,..
Film Tensile Strength at Break, MD	25.0 MPa @Temperature 24.0 °C	3630 psi @Temperature 75.2 °F	22mm/min; ISO 527-3
Borealis FA3227 Low Density Polyethylene FA3227 is a Low Density Polyethylene for Film Extrusion. Autoclave Technology. Heat and U/V stabilized. This grade is suitable for building construction film and meets the requirements for heat, al..
Film Tensile Strength at Break, MD	25.0 MPa	3630 psi	ISO 527-3
Borealis FT3200 Low Density Polyethylene FT3200 is a Low Density Polyethylene for Film Extrusion. Applications heavy-duty bags, shrink film, construction films, and agricultural films. FT3200 contains no additives.Information provided by..
Film Tensile Strength at Break, MD	25.0 MPa	3630 psi	500 mm/min; ISO 527-3
DuPont Elvaloy® 3217 AC Ethylene and 17% Butyl Acrylate Copolymer Elvaloy® 3217 AC contains antioxidant, slip and antiblock additives.Elvaloy® 3217 AC has been developed for film applications requiring a combination of softness, toughness and low friction. Typi..
Film Tensile Strength at Break, MD	25.0 MPa	3630 psi	ISO 527-3
Topas Advanced Polymers TOPAS® 9903D-10 Cyclic Olefin Copolymer (COC) TOPAS® 9903D-10 is a very low glass transition temperature (Tg=33°C) film extrusion grade. It is designed to deliver high shrinkage at low temperatures in shrink packaging applications. It is a mo..
Film Tensile Strength at Break, MD	25.0 MPa	3630 psi	ASTM D882
Braskem BC818 Extrusion Coating Low Density Polyethylene Description: BC818 is a grade produced under high pressure in an autoclave reactor. In the coating process it presents very good optical properties, low neck-in, good film stability, and good adhesi..
Film Tensile Strength at Break, MD	25.0 MPa	3630 psi	ASTM-D882
Braskem F 7018 LDPE Extrusion Coating Polyethylene LDPE F 7018 is a low-density polyethylene and has excellent processability and sealability at low temperatures. It does not contain additives. Its applications include: extrusion coating; and injec..
Film Tensile Strength at Break, MD	25.0 MPa	3630 psi	ASTM-D882
Braskem F7018 LDPE Injection Molding Polyethylene F7018 is a low-density polyethylene with excellent processability and sealability at low temperatures. It does not contain additives. Its applications include: extrusion coating, injection molding ..
Film Tensile Strength at Break, MD	25.0 MPa	3630 psi	ASTM-D882
Braskem TN7006 LDPE Blown Film Extrusion Polyethylene TN7006 is a low-density polyethylene (LDPE) specially developed for coextruded films and lamination. The resin presents a great combination of mechanical, optical, and stiffness properties. TN7006 h..
Film Tensile Strength at Break, MD	25.0 MPa	3630 psi	ASTM D882
Huntsman PE1451 EVA Film Extrusion (discontinued **) 4.5% Vinyl Acetate EVA copolymer and FDA compliantFeatures: Excellent balance of optical and strength, toughness and flexibility at low temperatures, and good heat seal characteristic.Applications: ..
Film Tensile Strength at Break, MD	25.0 - 33.0 MPa	3630 - 4790 psi	Average value: 28.3 MPa Grade Count:4
Overview of materials for Polypropylene with Carbon Black Filler This property data is a summary of similar materials in the MatWeb database for the category "Polypropylene with Carbon Black Filler". Each property range of values reported is minimum and maximum v..