Polymer Property : Tensile Strength, Yield = 72500 psi Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	500 MPa	72500 psi
Misumi ANP79 Aluminum Alloy Similar in hardness to 7075 Aluminum Alloy with lower internal stresses. Higher uniformity than 7075.Information provided by MISUMI Corporation.
Tensile Strength, Yield	>= 500 MPa @Strain 0.200 %	>= 72500 psi @Strain 0.200 %
Industeel SUPERELSOÂ® 500 Quenched and Tempered High Strength Steel for Pressure Equipment Description: SuperelsoÂ® 500 (SE 500) is a 500MPa (72ksi) yield strength quenched and tempered steel adapted for pressure equipment. SE 500 is manufactured via the electric furnace with dephosphor..
Tensile Strength, Yield	500 MPa @Strain 0.200 %	72500 psi @Strain 0.200 %
Haynes 625 alloy, 40% cold reduction, 1120Â°C anneal for 5 minutes Cb and Ta content 3.7% combined. Excellent strength up to 816Â°C, good oxidation resistance and aqueous corrosion, excellent forming and welding characteristics. Applications include a variety of ..
Tensile Strength, Yield	500 MPa @Temperature 550 Â°C	72500 psi @Temperature 1020 Â°F	Annealed prior to test
Special Metals INCONELÂ® Alloy MA 754 A mechanically alloyed nickel-chromium alloy with oxide dispersion strengthening. Mechanical alloying, which involves high-energy milling of metal powders, is used to create a uniformly distributed..
Tensile Strength, Yield	500 - 750 MPa @Strain 0.200 %	72500 - 109000 psi @Strain 0.200 %
SSAB Tunnplat DocolÂ® 1000 DL High-strength Steel In course of development.Data provided by SSAB Tunnplat.
Tensile Strength, Yield	500 - 620 MPa @Strain 0.200 %	72500 - 89900 psi @Strain 0.200 %
SSAB Tunnplat DocolÂ® 500YP High-strength Steel High-strength SteelComments: Docol YP - Cold Rolled Steel - HSLA. Property values are for cold-rolled steel; thicknesses 0.5 - 3.00 mm. Iron content is approximate - exact composition is not report..
Tensile Strength, Yield	>= 500 MPa	>= 72500 psi	After bake hardening
SSAB Tunnplat DocolÂ® 600DP High-strength Steel High-strength SteelComments: Docol DP - Cold Rolled Steel - Extra high-strength steel (EHS). Property values are for cold-rolled steel; thicknesses 0.5 - 1.6 mm. Iron content is approximate - exact..
Tensile Strength, Yield	500 - 650 MPa @Strain 0.200 %	72500 - 94300 psi @Strain 0.200 %
SSAB Tunnplat DocolÂ® 800 DP High-strength Steel Docol DP - Cold Rolled Steel - Extra high-strength steel (EHS). Property values are for cold-rolled steel; thicknesses 0.5 - 1.6 mm.Data provided by SSAB Tunnplat.
Tensile Strength, Yield	500 - 600 MPa @Strain 0.200 %	72500 - 87000 psi @Strain 0.200 %
SSAB Tunnplat Dogal 500YP High-strength Metal-coated Steel High-strength Metal-coated SteelComments: Dogal YP - HSLA steel. Property values are for thicknesses 0.4 to 2.5 mm. Iron content is approximate - exact composition is not reported by the manufactur..
Tensile Strength, Yield	>= 500 MPa	>= 72500 psi
SSAB Tunnplat DomexÂ® 500MC HSLA Steel HSLA SteelCharacteristics: Some thicknesses of these steel grades are available with a maximum of 0.03% Si for thin Zn coating. If the material is to be hot-dip galvanized and steel with a maximum ..
Tensile Strength, Yield	>= 500 MPa @Thickness 16.0 mm	>= 72500 psi @Thickness 0.630 in
ThyssenKrupp XABO® 500 T Structural Steel This Material Specification applies to thermo mechanically rolled flat products in thicknesses up to 60 mm. The criteria to distinguish the steel grades is the lowest test temperature for the notch-..
Tensile Strength, Yield	500 MPa	72500 psi
Goodfellow Aluminum-Lithium/SiC Metal Matrix Composite Information provided by Goodfellow.
Tensile Strength, Yield	>= 500 MPa	>= 72500 psi
ThyssenKrupp PAS 500 Structural Steel for Cold Forming This Material Specification applies to plates made of low carbon high strength steels with minimum yield strength values between 315 and 700 MPa1) in the thermo mechanically rolled delivery conditio..
Tensile Strength, Yield	>= 500 MPa @Thickness 16.0 mm	>= 72500 psi @Thickness 0.630 in
ThyssenKrupp XABO® 500 Structural Steel This Material Specification applies to thermo mechanically rolled flat products in thicknesses up to 60 mm. The criteria to distinguish the steel grades is the lowest test temperature for the notch-..
Tensile Strength, Yield	>= 500 MPa @Strain 0.200 %	>= 72500 psi @Strain 0.200 %
CLAL-MSX NICLAFOR® 1000 TD2 Quenched/Cold Rolled, Drawn Copper Alloy Finished parts can be produced with: reduction in sections, high mechanical properties even at high temperature, high spring properties, high conductivity, good resistance to corrosion, low permeabi..
Tensile Strength, Yield	>= 500 MPa @Strain 0.200 %	>= 72500 psi @Strain 0.200 %
CLAL-MSX NICLAFOR® 1000 TF Quenched/Precipitation Heat Treated, Drawn Copper Alloy Finished parts can be produced with: reduction in sections, high mechanical properties even at high temperature, high spring properties, high conductivity, good resistance to corrosion, low permeabi..
Tensile Strength, Yield	500 - 850 MPa	72500 - 123000 psi
ArcelorMittal Complex Phase Steel 800 Y500 Very high strength steel, Cold Rolled Steel Available in the following: uncoated (HCT780C) and electrogalvanized (HCT780C+ZE)Description: The Complex Phase family of steels supplements ArcelorMittal's VHSS (very high strength steel) product r..
Tensile Strength, Yield	500 - 600 MPa	72500 - 87000 psi
ArcelorMittal Dual Phase 780 LCE Y500 Very high strength steel, Cold Rolled Steel Description: Dual Phase steels offer an outstanding combination of strength and drawability as a result of their microstructure, in which a hard martensitic or bainitic phase is dispersed in a soft ..
Tensile Strength, Yield	500 - 590 MPa	72500 - 85600 psi
ArcelorMittal HSLA 500 High strength low alloy steel for cold forming, Hot Rolled Available in the following: S500MCDescription: Steels in the HSLA (High Strength Low Alloy) range are hardened by a combination of precipitation and grain size refining, resulting in high strength w..
Tensile Strength, Yield	500 - 600 MPa	72500 - 87000 psi
ArcelorMittal Dual Phase 780 Y500 Very high strength steel, Cold Rolled Steel Description: Dual Phase steels offer an outstanding combination of strength and drawability as a result of their microstructure, in which a hard martensitic or bainitic phase is dispersed in a soft ..