Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Deflection Temperature at 0.46 MPa (66 psi) = 212 °F Product List

Thermal Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Thermal Properties Metric English Comments
Deflection Temperature at 0.46 MPa (66 psi) 100 °C
212 °F
ASTM D648
SABIC PP 500P Polypropylene Homopolymer for Raffia Applications
Product Description: PP 500P is specially developed for producing stretched tapes with the following features:Consistent processabilityEasy orientationLow water carry overGood mechanical properties..
Deflection Temperature at 0.46 MPa (66 psi) 100 °C
212 °F
ASTM D648
SABIC PP 526P Polypropylene Homopolymer for Cast Film
Product Description: PP 526P is specially developed for cast film applications for producing clear films and does not contain slip or antiblock additives.Films produced using PP 526P will exhibit:C..
Deflection Temperature at 0.46 MPa (66 psi) 100 °C
212 °F
120°C/h; ISO 75/1
Polykemi AB POLYblend 45V PC/ABS-blend, Flame Retardant
Information provided by Polykemi AB
Deflection Temperature at 0.46 MPa (66 psi) 100 °C

@Thickness 3.20 mm
212 °F

@Thickness 0.126 in
unannealed; ASTM D 648
SABIC Innovative Plastics Cycoloy® C3650 PC+ABS (Europe-Africa-Middle East)
Flame retardant PC/ABS blend using non-brominated and non-chlorinated flame retardant systems, offering high impact and excellent extrusion and thermoforming characteristics. Halogen free according ..
Deflection Temperature at 0.46 MPa (66 psi) 100 °C

@Thickness 3.20 mm
212 °F

@Thickness 0.126 in
unannealed; ASTM D648
SABIC Innovative Plastics Cycoloy® CX7240 PC+ABS (Europe-Africa-Middle East)
Cycoloy* CX7240 resin is an injection moldable PC/ABS blend. It contains non-brominated and non-chlorinated flame retardant systems to meet UL-94 V0 at 0.75mm, V1 at 0.6mm, V2 at 0.4mm and 5VB at 1...
Deflection Temperature at 0.46 MPa (66 psi) 100 °C
212 °F
Polimeri Europa SINKRAL B232/E ABS, Heat Stabilized  (discontinued **)
Symbol according to ISO 1043-1: ABS Grade designation according to ISO 2580-ABS 1,EGN,105-04-09-25 Extrusion and thermoforming grade with good thermal resistance, high stiffness and a very low vol..
Deflection Temperature at 0.46 MPa (66 psi) 100 °C
212 °F
ASTM D648
Hyosung Topilene B200 PP
B200 Extrusion Special Purpose GradeApplications:Thermoforming sheetExtrusion blow moldingCharacteristics:StiffnessFormabilityInformation provided by Hyosung Corporation
Deflection Temperature at 0.46 MPa (66 psi) 100 °C
212 °F
ASTM D648
Hyosung Topilene R301 PP
R301 Extrusion Random CopolymerApplications:Extrusion blow moldingThermoforming sheetCharacteristics:TransparencyStiffnessStretchabilityInformation provided by Hyosung Corporation
Deflection Temperature at 0.46 MPa (66 psi) 100 °C
212 °F
ASTM D648
Hyosung Topilene R401 PP
R401 Extrusion Random CopolymerApplications:Extrusion blow moldingStationary sheetCharacteristics:TransparencyStiffnessInformation provided by Hyosung Corporation
Deflection Temperature at 0.46 MPa (66 psi) 100 °C

@Thickness 6.40 mm
212 °F

@Thickness 0.252 in
Unannealed; ASTM D648
LG Chemical BM662 ABS, Heat Resistance
Feature: Blow Molding, Heat ResistanceApplication: Automotives Exterior Housing (Spoiler, Bumper Guard etc.)CAS No. 25120-20-1, 9003-56-9, 25747-74-7 and 9003-54-7Information provided by LG Chemical..
Deflection Temperature at 0.46 MPa (66 psi) 100 °C
212 °F
ISO 75-1,-2
Ineos ABS Lustran® ABS 595CP Refrigeration and Extrusion Grade
Lustran® ABS 595CP is refrigeration and extrusion grade, resistant to cyclopentane, and has high impact strength.
Deflection Temperature at 0.46 MPa (66 psi) 100 °C

@Thickness 3.20 mm
212 °F

@Thickness 0.126 in
unannealed; ASTM D648
SABIC Innovative Plastics NORYL SE100V PPE+HIPS (Asia Pacific)
Deflection Temperature at 0.46 MPa (66 psi) 100 °C

@Thickness 3.20 mm
212 °F

@Thickness 0.126 in
unannealed; ASTM D648
SABIC Innovative Plastics LNP STAT-LOY M3000 PP
LNP STAT-LOY* M3000 is a compound based on unfilled Polypropylene resin. Added feature of this material is: Antistat.
Deflection Temperature at 0.46 MPa (66 psi) 100 °C
212 °F
Edgew 120*10*4 sp=100mm; ISO 75/Be
SABIC Innovative Plastics Xenoy® XD549S PBT+PC (Europe-Africa-Middle East)
Xenoy XD549S is an automotive grade, designed for thin wall (2.5 mm.) direct gated exterior parts. The material has an excellent flow. Xenoy XD549S can be painted with primerless solvent or waterbas..
Deflection Temperature at 0.46 MPa (66 psi) 100 °C
212 °F
Edgew 120*10*4 sp=100mm; ISO 75/Be
SABIC Innovative Plastics Noryl EN110 PPE+HIPS (Europe-Africa-Middle East)
NORYL EN110 is an extrusion material with a Vicat B/120 of 115°C according ISO 306. NORYL EN110 is a standard extrusion grade for applications where medium temperature resistance is required.This..
Deflection Temperature at 0.46 MPa (66 psi) 100 °C
212 °F
ASTM D648
A. Schulman POLYFORT™ PP 2268UX Heat Resistant Polypropylene
DescriptionPolyfort® PP 2268UX is a UV stabilized, extra high flow unique high modulus, heat resistant polypropylene.Information provided by A. Schulman.
Deflection Temperature at 0.46 MPa (66 psi) 100 °C
212 °F
ASTM D648
A. Schulman PP 3488-01 Polypropylene Homopolymer Polypropylene
DescriptionPolypropylene PP 3488-01 is a specially formulated homopolymer polypropylene designed for large appliance injection molding. This material has excellent chemical resistance in addition t..
Deflection Temperature at 0.46 MPa (66 psi) 100 °C
212 °F
ASTM D648
A. Schulman PP 3468-01 Polypropylene Homopolymer For High Speed Extrusion
DescriptionPolypropylene PP 3468-01 is a specially designed homopolymer for high speed extrusion applications. ApplicationTypical applications of PP 3468-01 include profile extrusions, strapping, r..
Deflection Temperature at 0.46 MPa (66 psi) 100 °C
212 °F
ISO 75
Polyram PlusTek PA823M6 Nylon 6.6 for Injection Molding, 30% Minerals Reinforced, Impact Modified
30% Minerals reinforced, impact modified Nylon 6.6 for injection molding applications.Information provided by Polyram.
Deflection Temperature at 0.46 MPa (66 psi) 100 °C
212 °F
ASTM D648
A. Schulman PP 829-01 Polypropylene Homopolymer Polypropylene
DescriptionPolypropylene PP 829-01 is a homopolymer polypropylene approved to Ford specification ESB-M4D63A. Primarily used for interior automotive components, this material is also well suited for..
Deflection Temperature at 0.46 MPa (66 psi) 100 °C
212 °F
ASTM D648
Westlake Plastics PMP Film Made from TPX® Polymethylpentene Resin
Lowest specific gravity of any known thermoplastic. Exceptional electrical properties. Good chemical resistance. High heat resistance. Excellent acoustical properties. Transparency. FDA compli..
Deflection Temperature at 0.46 MPa (66 psi) 100 °C
212 °F
ASTM D648
A. Schulman PP 3353-01 Polypropylene Medium Impact Polypropylene
DescriptionPolypropylene PP 3353-01 is a high flow medium impact polypropylene which is suitable for molding thin parts with long mold flow distances. It permits reduction of cycle times, temperatu..
Deflection Temperature at 0.46 MPa (66 psi) 100 °C
212 °F
ASTM D648
A. Schulman POLYFORT™ FXP 2600-3120 CaC02 Filled Homopolymer Polypropylene
DescriptionPolyfort® FXP 2600-3120 is a 20% GAC02 filled homopolymer polypropylene compound.Information provided by A. Schulman.
Deflection Temperature at 0.46 MPa (66 psi) 100 °C
212 °F
ISO 75-1,-2
Covestro Bayblend® FR3040 PC/ABS Blend
Main characteristics:• High toughness even at low temperatures• High dimensional accuracy and stability• Good paintability• Good flowabilityGrade characteristics:• Flame-retardant• Injec..
Deflection Temperature at 0.46 MPa (66 psi) 100 °C
212 °F
ISO 75-1/-2
DuPont Performance Polymers Crastin® ST820 BK503 Polybutylene Terephthalate (PBT)  (Unverified Data**)
Unreinforced Polybutylene Terephthalate with Excellent Impact Resistance Crastin ST820 BK503 is an unreinforced Super Tough black polybutylene terephthalate resin for injection molding.Information p..
Deflection Temperature at 0.46 MPa (66 psi) 100 °C
212 °F
ASTM D648
Aclo Accutech Polypropylene Copolymer CP0436T10L1 Talc Reinforced
Deflection Temperature at 0.46 MPa (66 psi) 100 °C
212 °F
ASTM D648
Aclo Accutech Polypropylene CP0405UVV Copolymer UV Stabilized
Approved to Suzuki PP-S2 Med Grey T01
Deflection Temperature at 0.46 MPa (66 psi) 100 °C
212 °F
Arkema Group Altuglas® 84 L Acrylic-Styrene Copolymer
ALTUGLAS 84 L is a new type of acrylic polymer produced by ATOHAAS which increases the range of material for injection molding applications. ALTUGLAS 84 L is a styrene methylmethacrylate copolymer s..
Deflection Temperature at 0.46 MPa (66 psi) 100 °C
212 °F
ISO 75-1/-2
DSM Arnitel® PB581-H Polyether Ester Elastomer (European Grade)  (discontinued **)
Product description: Arnitel® combines the advantages of engineering thermoplastics, being easy to process with excellent mechanical properties, at the same time with the flexibility of rubbers.Arn..
Deflection Temperature at 0.46 MPa (66 psi) 100 °C
212 °F
ASTM D648
ExxonMobil PP6262 Polypropylene Homopolymer
Product Description: A clarified homopolymer resin designed for production of extruded sheet and thermoformed containers. It exhibits excellent processing characteristics even in deep drawn applica..
Copyright © lookpolymers.com All Rights Reserved