Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Deflection Temperature at 0.46 MPa (66 psi) = 239 °F Product List

Thermal Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Thermal Properties Metric English Comments
Deflection Temperature at 0.46 MPa (66 psi) 115 °C
239 °F
Edgew 120*10*4 sp=100mm; ISO 75/Be
SABIC Innovative Plastics Cycoloy® C1000 PC+ABS (Europe-Africa-Middle East)
CYCOLOY C1000 is a PC+ABS blend developed with emphasis on excellent processing efficiency while maintaining good heat resistance and impact ductility. It is an excellent material choice for a wide ..
Deflection Temperature at 0.46 MPa (66 psi) 115 °C

@Thickness 3.20 mm
239 °F

@Thickness 0.126 in
unannealed; ASTM D 648
SABIC Innovative Plastics Cycoloy® C1950 PC+ABS
Low viscosity injection molding resin.This data was supplied by SABIC-IP for the Americas region.
Deflection Temperature at 0.46 MPa (66 psi) 115 °C
239 °F
120°C/h; ISO 75/1
Polykemi AB POLYblend C65F PC/ABS-blend
Information provided by Polykemi AB
Deflection Temperature at 0.46 MPa (66 psi) 115 °C
239 °F
120°C/h; ISO 75/1
Polykemi AB POLYfill PP HGX500707 Polypropylene, Multifiller
Information provided by Polykemi AB
Deflection Temperature at 0.46 MPa (66 psi) 115 °C
239 °F
120°C/h; ISO 75/1
Polykemi AB POLYfill PPH TS4020D Polypropylene Homopolymer, Mineral Reinforced, Detergent Resistant
Information provided by Polykemi AB
Deflection Temperature at 0.46 MPa (66 psi) 115 °C
239 °F
ISO 75-1/-2
DuPont Performance Polymers Crastin® 6134 NC010 PBT  (Unverified Data**)
Crastin® 6134 NC010 is an unreinforced, medium viscosity polybutylene terephthalate resin for extrusion and injection molding.Information provided by DuPont Performance Polymers
Deflection Temperature at 0.46 MPa (66 psi) 115 °C
239 °F
120°C/h; ISO 75/1
Polykemi AB POLYfill PPC T10030 Polypropylene Copolymer, Mineral Reinforced
Information provided by Polykemi AB
Deflection Temperature at 0.46 MPa (66 psi) 115 °C

@Thickness 3.20 mm
239 °F

@Thickness 0.126 in
unannealed; ASTM D 648
SABIC Innovative Plastics Valox® 308 PBT
PBT, For compounding only. Not intended for Injection Molding. Melt viscosity: 250C at 21.6 kgf is 3500-4500.This data was supplied by SABIC-IP for the Americas region.
Deflection Temperature at 0.46 MPa (66 psi) 115 °C

@Thickness 3.20 mm
239 °F

@Thickness 0.126 in
unannealed; ASTM D648
SABIC Innovative Plastics Valox® 309 PBT
PBT, For compounding only. Not intended for Injection Molding. Melt viscosity: 250C at 21.6 kgf is 3500-4500. Available in Natural (1001) only.
Deflection Temperature at 0.46 MPa (66 psi) 115 °C
239 °F
ISO 75-1/-2
Styrolution Luran® S KR 2858 GS Colored 15% Glass Filled ASA
Description: Glass-reinforced grade with high stiffness and heat distortion resistance.Information provided by STYROLUTION, which is a joint venture between BASF and INEOS
Deflection Temperature at 0.46 MPa (66 psi) 115 °C
239 °F
Flatw 80*10*4 sp=64mm; ISO 75/Bf
SABIC Innovative Plastics Xenoy® X4810 PBT+PC (Asia Pacific)
Xenoy X4810 is a hydrostable, High Modulus Ductile PC/PBT blend. This resin provides low temperature (below 0C) ductile impact behaviour, high chemical resistance, very low creep, low CTE, excellent..
Deflection Temperature at 0.46 MPa (66 psi) 115 °C
239 °F
Flatw 80*10*4 sp=64mm; ISO 75/Bf
SABIC Innovative Plastics LNP THERMOCOMP MK0049A PP (Europe-Africa-Middle East)
LNP* STARFLAM* MK0049A is a compound based on Polypropylene resin containing Talc, Flame Retardant. Added features include : Flame Retardant.
Deflection Temperature at 0.46 MPa (66 psi) 115 °C
239 °F
ASTM D648
SCG Chemicals EL-Proâ„¢ P842J Polypropylene Injection Molding
Key Characteristics:Excellent flowabilityExcellent processabilityExcellent stiffnessSuitable for complex parts and large partsRecommended Applications:Electrical appliance parts, mainly for refriger..
Deflection Temperature at 0.46 MPa (66 psi) 115 °C
239 °F
ISO 75-2
Borealis HJ320MO Polypropylene
HJ320MO is a polypropylene homopolymer intended for injection molding. Its very high melt flow makes it especially suitable for thin-wall packaging and products with long flow length. This grade is ..
Deflection Temperature at 0.46 MPa (66 psi) 115 °C
239 °F
ASTM D648
A. Schulman POLYFORT™ FXP 2779U UV Stabilized Copolymer Polypropylene
DescriptionPolyfort® FXP 2779U is a 20% talc-filled, UV stabilized copolymer polypropylene.Information provided by A. Schulman.
Deflection Temperature at 0.46 MPa (66 psi) 115 °C
239 °F
ISO 75-1/-2
EMS-Grivory Grivory® L 20 G PA12
Product Description: Grilamid L 20 LG is a normal viscosity, heat stabilized polyamide 12 non-reinforced injection molding grade. This product has very good flow characteristics Low moisture absorpt..
Deflection Temperature at 0.46 MPa (66 psi) 115 °C
239 °F
ISO 75-1/-2
EMS-Grivory Grivory® L 25H FWA black 9225 PA12
Product Description: Grilamid L 25 H FWA black 9225 is a highviscosity, unreinforced and heat stabilized Polyamide 12 (PA12). Grilamid L 25 H FWA black 9225 is designed for technical injection mould..
Deflection Temperature at 0.46 MPa (66 psi) 115 °C
239 °F
ISO 75-1/-2
EMS-Grivory Grivory® XE 4071 black 9992 PA612
Product description: Grilamid XE 4071 BLACK 9992 is an impact modified unreinforced high viscosity polyamide 612 (PA612) extrusion grade with superior heat and hydrolysis resistance. Compared to sta..
Deflection Temperature at 0.46 MPa (66 psi) 115 °C
239 °F
ISO 75-1/-2
DuPont Performance Polymers Crastin® 6131 NC010 Polybutylene Terephthalate (PBT)  (Unverified Data**)
Unreinforced Low Viscosity Polybutylene Terephthalate Crastin 6131 NC010 is an unreinforced low viscosity polybutylene terephthalate resin for extrusion and injection molding.Information provided by..
Deflection Temperature at 0.46 MPa (66 psi) 115 °C
239 °F
ISO 75-1/-2
DuPont Performance Polymers Crastin® FG6129 NC010 Polybutylene Terephthalate (PBT)  (Unverified Data**)<
Unreinforced High Viscosity Polybutylene Terephthalate Developed for Food Contact Applications and Extrusion and Injection Molding Crastin FG6129 NC010 is an unreinforced high viscosity polybutylene..
Deflection Temperature at 0.46 MPa (66 psi) 115 °C
239 °F
ISO 75-1/-2
DuPont Performance Polymers Crastin® FG6134 NC010 Polybutylene Terephthalate (PBT)  (Unverified Data**)<
Unreinforced Medium Viscosity Polybutylene Terephthalate Developed for Food Contact Applications Crastin® FG6134 NC010 is an unreinforced medium viscosity polybutylene terephthalate resin for injec..
Deflection Temperature at 0.46 MPa (66 psi) 115 °C
239 °F
ISO 75-1/-2
DuPont Performance Polymers Crastin® FGS600F40 NC010 Polybutylene Terephthalate (PBT)  (Unverified Data**)
Unreinforced Low Viscosity Polybutylene Terephthalate Developed for Food Contact Applications Crastin FGS600F40 NC010 is an unreinforced low viscosity polybutylene terephthalate resin for injection ..
Deflection Temperature at 0.46 MPa (66 psi) 115 °C
239 °F
ISO 75-1/-2
EMS-Grivory Grivory® XE 4180 nat PA1010
Product description: Grilamid XE 4180 natural is a unreinforced, high viscosity, plasticized, high impact resistant polyamide 1010 (PA1010) extrusion grade. Grilamid XE 4180 NATURAL is highly resist..
Deflection Temperature at 0.46 MPa (66 psi) 115 °C
239 °F
LAB036
ExxonMobil Mytex™ AS65KW-LGDC
Talc filled compounded polypropylene produced for automotive interior applicationsInformation provided by ExxonMobil Chemical
Deflection Temperature at 0.46 MPa (66 psi) 115 °C
239 °F
ISO 75-1/-2
EMS-Grivory Grivory® L 25 W 10 H X PA12
Product Description: Grilamid L 25 W 10 HX is a semi flexible, plasticized, high viscosity extrusion grade of Polyamide 12 (PA12). Grilamid L 25 W 10 HX is impact modified and heat and UV stabilized..
Deflection Temperature at 0.46 MPa (66 psi) 115 - 118 °C
239 - 244 °F
C.O.I.M. EXTER S® S 401 Isophthalic Resin
Description: The Exter S product line contains a large number of unsaturated polyester resin products with an array of properties and applications.Specific Notes for ESTER S® S 401: Food-grade resi..
Deflection Temperature at 0.46 MPa (66 psi) 115 °C
239 °F
BASF Procom® D 1188 Polypropylene
Data was collected by ISO methods and provided by BASF.
Deflection Temperature at 0.46 MPa (66 psi) 115 °C
239 °F
ISO 75-1/-2
DSM Arnite® A04 900 PET (European Grade)
Arnite resins are engineered to provide specific performance in applications where DSM technology can offer value.Arnite Molding resins: Standard Unfilled and Reinforced materialsHigh modulus Flame ..
Deflection Temperature at 0.46 MPa (66 psi) 115 °C
239 °F
Asahi Kasei Xyron® AT610 Modified Polyphenylene Ether
Applications: Information provided by Asahi Kasei
Copyright © lookpolymers.com All Rights Reserved