Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Deflection Temperature at 1.8 MPa (264 psi) = 220 °C Product List

Thermal Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Thermal Properties Metric English Comments
Deflection Temperature at 1.8 MPa (264 psi) 220 °C

@Thickness 3.20 mm
428 °F

@Thickness 0.126 in
unannealed; ASTM D648
Ovation Polymers RIGITRON 30545 GF Polyester, 45% Glass Reinforced
Polyester – 45% Glass Fiber Reinforced PET. *All properties are measured after 48 hours of conditioning at 23°C and 50% relative humidity. All samples are prepared according to ASTM standards. Var..
Deflection Temperature at 1.8 MPa (264 psi) 220 °C
428 °F
ISO 75
Nilit FRIANYL A63 CU90 Nylon 6.6 for injection molding, 90% copper filled
Nylon 6.6 for injection moldingInformation provided by Frisetta Polymer, which merged into Nilit Plastics
Deflection Temperature at 1.8 MPa (264 psi) 220 °C
428 °F
DIN 53461
Qualchem Danamid AFGFS2HUV30 Polyamide 66, 30% Glass Fiber
Reinforced with glass fiber. Impact modified, heat and UV stabilized, for long-lasting use at 120-140°C, resistant to artificial lights.Information provided by Qualchem Zrt.
Deflection Temperature at 1.8 MPa (264 psi) 220 °C
428 °F
ASTM D648
Samyang Tripet® 2550GN45 Polyethylene Terephthalate, 45% Glass Fiber Reinforced, Flame Retardant  (discontinue
TRIPET® has excellent heat resistance, good surface, chemical resistance and high electrical performance.Applications:Coil BobbinConnectorMotor HousingLamp HousingRelay BaseIron bodyAll information..
Deflection Temperature at 1.8 MPa (264 psi) 220 - 268 °C
428 - 514 °F
Average value: 250 °C Grade Count:10
Overview of materials for Polyphenylene Sulfide (PPS), Conductive
This property data is a summary of similar materials in the MatWeb database for the category "Polyphenylene Sulfide (PPS), Conductive". Each property range of values reported is minimum and maximum ..
Deflection Temperature at 1.8 MPa (264 psi) 220 °C
428 °F
ISO 75-1/-2
Lanxess Durethan® AKV 30 GIT H2.0 900116 Nylon 66, 30% Glass Fiber
PA 66, injection molding grade, 30% glass fibers, suitable for GIT (gas assisted technology), good surface finish, good heat-ageing resistance
Deflection Temperature at 1.8 MPa (264 psi) >= 220 °C

@Thickness 6.40 mm
>= 428 °F

@Thickness 0.252 in
Unannealed; ASTM D648
LG Chemical LUSEP SP2300 SPS+GF30%, General Purpose
Feature: Injection Molding, sPS+GF30%, General PurposeApplication: Pump Units, Pick-up Lends Holder, etc.CAS No. 9003-53-6 and 65997-17-3Information provided by LG Chemical
Deflection Temperature at 1.8 MPa (264 psi) >= 220 °C
>= 428 °F
Flatw 80*10*4 sp=64mm; ISO 75/Af
SABIC Innovative Plastics LNP LUBRICOMP RFL36 PA 66 (Europe-Africa-Middle East)
LNP* Lubricomp* RFL36 is a compound based on Nylon 66 resin containing Glass Fiber, PTFE.
Deflection Temperature at 1.8 MPa (264 psi) 220 °C
428 °F
Unannealed; ASTM D648
Techmer ES Elastoblend® PA6/6 GF15 IM HS L 15% Glass Filled
Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber Reinforcement, 15% Filler by WeightAdditive: Heat Stabilizer, Lubricant and Impact ModifierFeatures: Heat Stabilized, Lubri..
Deflection Temperature at 1.8 MPa (264 psi) 220 °C
428 °F
Annealed; ISO 75-2/A
Solvay Specialty Polymers Ixef® 1622 Polyarylamide (PARA), 50% Glass Fiber (Dry)
Ixef® 1622 is an impact modified, 50% glass-fiber reinforced polyarylamide. which exhibits very high strength and rigidity, outstanding surface gloss, and excellent impact resistance.Features: Go..
Deflection Temperature at 1.8 MPa (264 psi) 220 °C
428 °F
GB/T 1634.2-2004
Sichuan Deyang Haton® hFR70 PPS / AR Polyphenylene Sulfide
Injection molding, themal conductionInformation provided by Sichuan Deyang Chemical Co., LTD
Deflection Temperature at 1.8 MPa (264 psi) 220 °C
428 °F
Unannealed; ASTM D648
Techmer ES Electrablend® PA6/6 03002 CF Carbon Filled
Availability: North AmericaForms: PelletsFiller/Reinforcement: Carbon Fiber ReinforcementAdditive: Lubricant, Impact Modifier and Heat StabilizerFeatures: Lubricated, Electrically Conductive, Impact..
Deflection Temperature at 1.8 MPa (264 psi) 220 °C
428 °F
Unannealed; ASTM D648
Techmer ES Electrablend® PA6/6 03003 CF Carbon Filled
Availability: North AmericaForms: PelletsFiller/Reinforcement: Carbon Fiber ReinforcementAdditive: Lubricant, Impact Modifier and Heat StabilizerFeatures: Lubricated, Electrically Conductive, Impact..
Deflection Temperature at 1.8 MPa (264 psi) 220 °C

@Thickness 3.20 mm
428 °F

@Thickness 0.126 in
unannealed; ASTM D648
SABIC Innovative Plastics LNP THERMOTUF VX00585 PA 66 (Asia Pacific)
LNP* Thermotuf* VX00585 is a compound based on Nylon 66 resin containing Glass Fiber. Added features of this material include: High Impact.
Deflection Temperature at 1.8 MPa (264 psi) 220 °C
428 °F
ASTM D648
Solvay TECHNYL® 2412GM05-D PA66, 38% glass fiber, DRY
Description: Polyamid 66, reinforced with 38% of glass fiber and mineral filler, for injection molding.Available in: Asia PacificProduct Applications: TECHNYL® 2412GM05-D is used in all sectors o..
Deflection Temperature at 1.8 MPa (264 psi) 220 °C
428 °F
DIN 53461
Polyram PlusTek PA517 Nylon 6.6, Flame Retardant
Flame retardant halogen free polyamide 6.6 formulated to meet V-0, for injection molding applicationsInformation provided by Polyram Ram On Ind.
Deflection Temperature at 1.8 MPa (264 psi) 220 °C
428 °F
ISO 75
Wellman EcoLon® MRGF1518-BK Mineral/Glass Fiber Reinforced Nylon 66, Lubricated, Heat Stabilized, PCR
Typical Applications: Lawn and garden equipment, automotive trim, bezels, wheel covers, window frames, gas tank filler housings, brackets, metalized lighting reflectors for automotive, automotive co..
Deflection Temperature at 1.8 MPa (264 psi) 220 °C
428 °F
ISO 75-93
Wellman Wellamid® GF1701-N1 5% Glass Fiber Reinforced, Engineering Grade Nylon 66
Description: Glass Fiber Reinforced, Engineering Grade Nylon 66Information provided by Wellman.
Deflection Temperature at 1.8 MPa (264 psi) 220 °C
428 °F
ISO 75
Wellman Wellamid® MRGF25/15 22H-N 25% Mineral/15% Glass Fiber Reinforced Nylon 66, Heat Stabilized
Typical Applications: Lawn and garden equipment, automotive trim, bezels, wheel covers, window frames, gas tank filler housings, brackets, metalized lighting reflectors for automotive, automotive co..
Deflection Temperature at 1.8 MPa (264 psi) 220 °C
428 °F
ASTM D648
Toyobo Vylopet® EMC330K Glass Reinforced Polyester, Easy Molding Grade
HB UL-94 classApplications: General and high rigidity componentsGeneral features of Vylopet® include heat resistance, good mechanical properties, high dielectric strength and tracking resistance, c..
Deflection Temperature at 1.8 MPa (264 psi) 220 °C
428 °F
ISO 179
CP-Polymer-Technik Wellamid® 6600/50 GV 15 HWCP 15% Glass Fiber Nylon 66, Impact Modified Until 0°C, Heat Stabilized, Dry
Information provided by CP-Polymer-Technik GmbH & Co. KG
Deflection Temperature at 1.8 MPa (264 psi) 220 °C
428 °F
ISO 75-1/-2
EMS-Grivory Grivory® TSG-50 PA666-GF50
Product description: Grilon TSG-50 is a heat stabilized, normal viscosity PA66 + PA6 injection molding grade with 50% glass fibers. Grilon TSG-50 has the following important properties: High stiffne..
Deflection Temperature at 1.8 MPa (264 psi) 220 °C
428 °F
ISO 75-1/-2
DuPont Performance Polymers Rynite® 940 BK505 Polyethylene Terephthalate (PET)  (Unverified Data**)
40% Glass/Mineral Reinforced Polyethylene Terephthalate Rynite 940 BK505 is a 40% mica/glass reinforced modified polyethylene terephthalate with greater strength stiffness and low warpage.Informatio..
Deflection Temperature at 1.8 MPa (264 psi) 220 °C
428 °F
ISO 75
Eurotec® Tecomid® NA40 AR20 NL HS PA6.6, 20% aramid fiber reinforced, heat stabilized, natural
Information provided by Eurotec®
Deflection Temperature at 1.8 MPa (264 psi) 220 °C
428 °F
ASTM Test
BASF Petra® 130 FR 30% Glass Filled PET
Petra 130 FR is a 30% glass fiber reinforced, flame retardant injection molding polyethylene terephthalate feedstocks. It is recognized as UL 94V-0/5VA by Underwriters Laboratories. It is also avail..
Deflection Temperature at 1.8 MPa (264 psi) 220 °C
428 °F
ASTM D648
A. Schulman ComAlloy Hiloy® 436 Glass/Mineral Reinforced, PBT Alloy
Data provided by the manufacturer, ComAlloy International Company.20% Glass/Mineral Reinforced.The ComAlloy product line has been integrated into the A Schulman product line.
Deflection Temperature at 1.8 MPa (264 psi) 220 °C
428 °F
HDT/A; ISO 75-2
Akro-Plastic Akromid® B3 GF 50 (2475) PA 6 Dry, 50% Glass Filled
AKROMID® B (Polyamide 6) is an engineering compound, characterized by high mechanical strength, stiffness and thermal resistance. Furthermore, this polyamide offers high toughness at low temperatur..
Deflection Temperature at 1.8 MPa (264 psi) 220 °C
428 °F
ASTM D648
Beijing Chemical Industry KAIFA® 3030 PET Resin
High mechanical strength, Creep resistant, Low frictionInformation provided by Beijing Chemical Industry Research Institute (Group)
Deflection Temperature at 1.8 MPa (264 psi) 220 °C
428 °F
ASTM D648
Plenco 50130 PET, Pellet, Injection Molded, Black  (discontinued **)
PLENCO 50130 is an engineering grade glass reinforced UL flame rated polyethylene terephthalate resin designed for good physical strength. It is UL listed and available in natural and black.Informat..
Deflection Temperature at 1.8 MPa (264 psi) 220 °C
428 °F
ASTM D648
Plenco 50240 PET, Pellet, Injection Molded, Black  (discontinued **)
PLENCO 50240 is an engineering grade glass reinforced UL flame rated polyethylene terephthalate resin designed for excellent dimensional stability. It is UL listed and available in natural and black..
Copyright © lookpolymers.com All Rights Reserved