- HOME
- POLYMER SEARCH
- Polymer Property : Flash Point = 93.0 °C
Polymer Property : Flash Point = 93.0 °C Product List
Thermal PropertiesTips: 30 items are displayed at most. For the rest of the results, please contact customer service.
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Flash Point | 93.0 °C | 199 °F | |
| LG Chemical P.F.O Structure & Characteristics: Obtained as a by-product of naphtha pyrolysis process. Compared to other products, it is higher in density and significantly more viscous but lower in vapor pressureUses.. |
|||
| Flash Point | 93.0 °C | 199 °F | |
| Lord Adhesives 305 General Purpose, Medium Viscosity Epoxy Adhesive Lord Epoxy AdhesivesLord® Epoxy Adhesives create superior bonds for rubber, SMC, plastics and metals. Our epoxy adhesives are widely used in the automotive industry, over 10 million cars and ligh.. |
|||
| Flash Point | 93.0 °C | 199 °F | |
| Lord Adhesives 307 General Purpose, Medium Viscosity Hardener for Lord 305-1 Lord Epoxy AdhesivesLord® Epoxy Adhesives create superior bonds for rubber, SMC, plastics and metals. Our epoxy adhesives are widely used in the automotive industry, over 10 million cars and ligh.. |
|||
| Flash Point | 93.0 °C | 199 °F | |
| Lord Adhesives 309 General Purpose, Non-Sag, Thixotropic Epoxy Adhesive Lord Epoxy AdhesivesLord® Epoxy Adhesives create superior bonds for rubber, SMC, plastics and metals. Our epoxy adhesives are widely used in the automotive industry, over 10 million cars and ligh.. |
|||
| Flash Point | 93.0 °C | 199 °F | |
| Lord Adhesives 360 Sag-Resistant, High-Performance, 5 min Epoxy Adhesive Lord Epoxy AdhesivesLord® Epoxy Adhesives create superior bonds for rubber, SMC, plastics and metals. Our epoxy adhesives are widely used in the automotive industry, over 10 million cars and ligh.. |
|||
| Flash Point | 93.0 °C | 199 °F | |
| Lord Adhesives 363 Two-Component, Fast Set, Modified Epoxy Adhesive Lord Epoxy AdhesivesLord® Epoxy Adhesives create superior bonds for rubber, SMC, plastics and metals. Our epoxy adhesives are widely used in the automotive industry, over 10 million cars and ligh.. |
|||
| Flash Point | >= 93.0 °C | >= 199 °F | C Curative; Closed Cup |
| Lord Adhesives 7542 Urethane Adhesive LORD® 7542 adhesive is an equal-mix, two-component urethane adhesive system used to bond FRP, SMC and other plastics with little surface preparation. This adhesive will also bond primed metals. L.. |
|||
| Flash Point | >= 93.0 °C | >= 199 °F | |
| Lord Adhesives CircuitSAFâ„¢ MA-420 Epoxy Surface Mount Adhesive CircuitSAFâ„¢ MA-420 is an epoxy surface mount adhesive that cures rapidly at elevated temperatures and has been designed for use in high speed printed circuit board assembly for the attachment o.. |
|||
| Flash Point | >= 93.0 °C | >= 199 °F | Fusor 2201; Closed Cup |
| Lord Adhesives Fusor® 2200 / 2201 Urethane Adhesive Fusor® 2200/2201 is a black equal-mix, twocomponent, paste urethane adhesive system. Fusor 2200/2201 adhesive bonds FRP, SMC, and other plastics with little surface preparation where bond strengt.. |
|||
| Flash Point | >= 93.0 °C | >= 199 °F | 309-2D Hardener; Closed Cup |
| Lord Adhesives Fusor® 309-1D / 309-2D Epoxy Adhesive Lord® 309 is a high performance, thixotropic, two-part epoxy adhesive that is used for applications that require gap filling or non-slumping characteristics on a vertical substrate. The cured adh.. |
|||
| Flash Point | >= 93.0 °C | >= 199 °F | 310A Resin; Closed Cup |
| Lord Adhesives Fusor® 310 A/B Epoxy Adhesive Lord® 310 adhesive is a modified, thixotropic, two-part epoxy adhesive which bonds well to many types of prepared metals, prepared rubber, urethane, and plastics. Originally formulated for primer.. |
|||
| Flash Point | >= 93.0 °C | >= 199 °F | 310B Hardener; Closed Cup |
| Lord Adhesives Fusor® 310 A/B Epoxy Adhesive Lord® 310 adhesive is a modified, thixotropic, two-part epoxy adhesive which bonds well to many types of prepared metals, prepared rubber, urethane, and plastics. Originally formulated for primer.. |
|||
| Flash Point | >= 93.0 °C | >= 199 °F | Mixed; Closed Cup |
| Lord Adhesives Fusor® 310 A/B Epoxy Adhesive Lord® 310 adhesive is a modified, thixotropic, two-part epoxy adhesive which bonds well to many types of prepared metals, prepared rubber, urethane, and plastics. Originally formulated for primer.. |
|||
| Flash Point | >= 93.0 °C | >= 199 °F | 380NS Resin; Closed Cup |
| Lord Adhesives Fusor® 380NS / 383NS Epoxy Adhesive LORD Fusor® 380NS/383NS adhesive is a two-part, rapid-cure epoxy adhesive used to bond fiberglass reinforced plastics (FRP), sheet molded compounds (SMC) and metals.All information provided by Lo.. |
|||
| Flash Point | >= 93.0 °C | >= 199 °F | 253 Resin; Closed Cup |
| Lord Adhesives Versilok® 253 / 254 Acrylic Adhesive LORD Versilok® 253/254 adhesive is a two-component, epoxy-modified acrylic adhesive used to bond a variety of automotive sheet metals, including hot-dip galvanized, electro-galvanized, bare alum.. |
|||
| Flash Point | >= 93.0 °C | >= 199 °F | 254 Hardener; Closed Cup |
| Lord Adhesives Versilok® 253 / 254 Acrylic Adhesive LORD Versilok® 253/254 adhesive is a two-component, epoxy-modified acrylic adhesive used to bond a variety of automotive sheet metals, including hot-dip galvanized, electro-galvanized, bare alum.. |
|||
| Flash Point | >= 93.0 °C | >= 199 °F | 262 Resin; Closed Cup |
| Lord Adhesives Versilok® 262 / 254 Acrylic Adhesive LORD Versilok® 262/254 adhesive is a two-component, epoxy-modified acrylic adhesive used to bond a variety of automotive sheet metals, including hot-dip galvanized, electro-galvanized, bare alumi.. |
|||
| Flash Point | >= 93.0 °C | >= 199 °F | 254 Hardener; Closed Cup |
| Lord Adhesives Versilok® 262 / 254 Acrylic Adhesive LORD Versilok® 262/254 adhesive is a two-component, epoxy-modified acrylic adhesive used to bond a variety of automotive sheet metals, including hot-dip galvanized, electro-galvanized, bare alumi.. |
|||
| Flash Point | >= 93.0 °C | >= 199 °F | 262B Resin; Closed Cup |
| Lord Adhesives Versilok® 262B / 254 Acrylic Adhesive LORD Versilok® 262B/254 adhesive is a two-component, epoxy-modified acrylic adhesive used to bond a variety of automotive sheet metals, including hot-dip galvanized, electro-galvanized, bare alum.. |
|||
| Flash Point | >= 93.0 °C | >= 199 °F | 254 Hardener; Closed Cup |
| Lord Adhesives Versilok® 262B / 254 Acrylic Adhesive LORD Versilok® 262B/254 adhesive is a two-component, epoxy-modified acrylic adhesive used to bond a variety of automotive sheet metals, including hot-dip galvanized, electro-galvanized, bare alum.. |
|||
| Flash Point | >= 93.0 °C | >= 199 °F | 254 Hardener; Closed Cup |
| Lord Adhesives Versilok® 265 / 254 Acrylic Adhesive LORD Versilok® 265/254 adhesive is a two-component, epoxy-modified acrylic adhesive used to bond a variety of automotive sheet metals, including hot-dip galvanized, electro-galvanized, bare alumi.. |
|||
| Flash Point | 93.0 °C | 199 °F | |
| LG Chemical C9 Product Physical Properties: Colorless liquid similar to DIESEL oilObtained as a by-product from pyrolysis oil hydration plant which was produced from naphtha pyrolysis process. It is composed of hydrocarbo.. |
|||
| Flash Point | >= 93.0 °C | >= 199 °F | |
| Solvay GEROPON® TC 42 LQ Surfactant Description: Liquid Sodium Methyl Cocoyl Taurate that demonstrates good lathering properties in skin cleanser and shampoo applications. Displaysexcellent dispersiblity properties in hard water and h.. |
|||
| Flash Point | >= 93.0 °C | >= 199 °F | |
| Solvay IGEPAL® CO 210 Surfactant Description: Nonyl phenol ethoxylate (1.5EO). Foam stabilizer (in low concentration) for high-foaming detergents. Defoamer (in higher concentration) for low-foaming and cold-water detergents. Co-em.. |
|||
| Flash Point | 93.0 °C | 199 °F | Open cup |
| Dow Corning XIAMETER® PMCPMHX-1107 Fluid 30CS Is chemically equivalent to DOW CORNING® MH 1107 FLUID 30 CST. Polymethylhydrogen siloxane fluid, available in 30 cSt viscosity. 1.55-1.60%SiH.Information provided by Dow Corning |
|||
| Flash Point | >= 93.0 °C | >= 199 °F | Closed cup |
| Dow Corning 2502 Cosmetic Fluid A linear polydimethylsiloxane with randomly distributed alkyl chains for use in skincare, woundcare, haircare, suncare, and color cosmetic applications.Information provided by Dow Corning |
|||
| Flash Point | 93.0 °C | 199 °F | |
| 3M 32661 Heavy Duty Performance Coating - Part B 3M™ HD (Heavy Duty) Performance Coating is 100% solids elastomeric lining especially developed for high abrasion and tear resistance with thick build up characteristics. It has good durability and .. |
|||
| Flash Point | 93.0 °C | 199 °F | |
| 3M 32660 Heavy Duty Performance Coating - Part A 3M™ HD (Heavy Duty) Performance Coating is 100% solids elastomeric lining especially developed for high abrasion and tear resistance with thick build up characteristics. It has good durability and .. |
|||
| Flash Point | 93.0 °C | 199 °F | |
| 3M 32665 Green Heavy Duty Performance Coating - Part B 3M™ HD (Heavy Duty) Performance Coating is 100% solids elastomeric lining especially developed for high abrasion and tear resistance with thick build up characteristics. It has good durability and .. |
|||
| Flash Point | 93.0 °C | 199 °F | |
| 3M 32664 Light Gray Heavy Duty Performance Coating - Part B 3M™ HD (Heavy Duty) Performance Coating is 100% solids elastomeric lining especially developed for high abrasion and tear resistance with thick build up characteristics. It has good durability and .. |
|||
Copyright © lookpolymers.com All Rights Reserved