Processing Properties | Metric | English | Comments |
---|---|---|---|
Cure Time | 1440 min | 24.0 hour | On Steel (Full) |
ND Industries 360 Surface Insensitive Instant Superglue General DescriptionA medium viscosity, general purpose cyanoacrylate which is also surface sensitive. Can handle a wide array of materials which include wood, cork, leather, stone and plastics, in .. |
|||
Cure Time | 1440 min | 24.0 hour | On Steel (Full) |
ND Industries 444 High pressure Sealant Very high strength hydraulic sealant. Non-shrink, high vibration and shock resistance |
|||
Cure Time | 1440 min | 24.0 hour | On Steel (Full) |
ND Industries 446 High pressure Sealant Very high strength refrigerant sealant. Maximum solvent resistance |
|||
Cure Time | 1440 min | 24.0 hour | With Primer (Full) |
ND Industries 541 Shaft & Bearing Retainer Retaining Compound Very high strength retainer for gears, wheels, pulleys, cams, collars, flywheels, rotors to shaft |
|||
Cure Time | 1440 min | 24.0 hour | On metal (Full) |
ND Industries 621 Heptane-Acetone SuperGlue accelerator Fast acting SuperGlue accelerator 15 seconds. Non-ozone depleting but flammable solvent |
|||
Cure Time | 1440 min | 24.0 hour | On steel (Full) |
ND Industries NutGrade® 122 Removable Threadlocker A medium strength, oil tolerant threadlocker. Seals most types of nuts and bolts allowing disassembly using standard tools.Typical Usesstuds and bolts, threaded pipe fittings, and locking nuts or b.. |
|||
Cure Time | 1440 min | 24.0 hour | On Steel (Full) |
ND Industries SuperGlue Ethyl 322 High viscosity for large gap filling non-metallic surfacesMeets military spec Mil-A-46050C Type II Class III |
|||
Cure Time | 1440 min | 24.0 hour | Cured State |
Palm Labs Adhesives TURBO FUSE METHYL FOR METALS (75-95 Viscosity) Rapid Bonding Adhesive Palm Lab's Methyl Cyanoacrylate is a one component rapid bonding adhesive ideal for metal surfaces. TURBO FUSE METHYL’s advanced formula is designed to polymerize instantly by absorbing surface moi.. |
|||
Cure Time | 1440 min | 24.0 hour | |
Parker Chomerics Tecknit Teckfip™ FIP-A Formed in Place Conductive Elastomer Description: This compound is ideally suited to corrosion-concerned applications where the gasket is applied to an aluminum casting. The corrosion resistance is enhanced due to the galvanic compatib.. |
|||
Cure Time | <= 1440 min | <= 24.0 hour | |
Parker Chomerics Tecknit Teckfip™ FIP-C (SP) Formed in Place Conductive Elastomer Description: This is the small particle version of the FIP-C compound. It was specifically designed for mobile cell phone applications, which require a high degree of EMI shielding. While the compou.. |
|||
Cure Time | 1440 min | 24.0 hour | full cure |
Permabond TA4300 Toughened Acrylic Adhesive PERMABOND® TA4300 is a 2-part, 1:1 toughened acrylic adhesive. Its toughening makes it ideal for bonding dissimilar materials where differential thermal expansion and contraction could be an issue... |
|||
Cure Time | 1440 min | 24.0 hour | full cure |
Permabond TA4810 Toughened Acrylic Adhesive PERMABOND TA4810 is a 2-part, 1:1 toughened methacrylate adhesive designed for bonding thermoplastics, thermosets, metals and composites. TA4810 has excellent adhesion to as received metal surfac.. |
|||
Cure Time | 1440 min | 24.0 hour | full cure |
Permabond TA4302 Toughened Acrylic Adhesive PERMABOND® TA4302 is a 2-part, 1:1 toughened acrylic adhesive. It can be used to bond a wide variety of materials including metals, plastics, GRP, ceramics, wood and other substrates. It is conveni.. |
|||
Cure Time | >= 1440 min @Temperature 23.0 °C |
>= 24.0 hour @Temperature 73.4 °F |
|
Humiseal 1B31 Acrylic Conformal Coating Humiseal 1B31 Acrylic Conformal CoatingHigh moisture resistanceExcellent dielectrical propertiesSelective chemical resistanceExcellent repairabilityMIL-I-46058C ApprovedPasses thermal shock test (MI.. |
|||
Cure Time | 1440 - 2880 min | 24.0 - 48.0 hour | hard dry (return to service) |
Industrial Nanotech Nansulateâ„¢ High Heat Translucent Insulation Coating Liquid insulation and corrosion protection incorporating Hydro-NM-Oxide, a product of nanotechnology.NANSULATEâ„¢ liquid applied insulation is a premium industrial grade rust proofing protective .. |
|||
Cure Time | 1440 min @Temperature >=18.0 °C |
24.0 hour @Temperature >=64.4 °F |
|
Lord Adhesives 320 / 322 Epoxy Adhesive LORD® 320/322 adhesive is a general purpose, two component epoxy adhesive system formulated for primerless adhesion to automotive sheet molded compounds (SMC). This adhesive system also provides .. |
|||
Cure Time | 1440 min | 24.0 hour | |
Lord Adhesives 660 White, Non Sag, Fast Set for FRP Acrylic Adhesive Lord Adhesives 660 White, Non Sag, Fast Set for FRP Acrylic AdhesiveLord 660 Acrylic Adhesive bonds FRP (fiber-reinforced plastics) with minimal surface preparation. Lord 660 can cross-bond FRP to m.. |
|||
Cure Time | 1440 min @Temperature 25.0 °C |
24.0 hour @Temperature 77.0 °F |
|
Lord Adhesives Thermosetâ„¢ SC-300M Silicone Gel Encapsulant SC-300M is a two-part, rapid curing, platinum-catalyzed, addition cured, silicone gel. It has an extremely soft, gel-like consistency when cured, and has excellent unprimed adhesion to most substrat.. |
|||
Cure Time | 1440 min | 24.0 hour | Functional cure |
ITW Devcon Flexane® Rubber Repair / Castable Urethane Brushable, Black Information provided by ITW Devcon |
|||
Cure Time | 1440 min | 24.0 hour | Through |
Momentive Performance Materials RTV6703 One-Component, Modified Alkoxy Adhesive Sealant, Black RTV6700 Series sealants are neutral cure, one-component, ready to use silicone adhesive sealants that cure to tough resilient silicone rubber on exposure to atmospheric moisture at room temperature... |
|||
Cure Time | <= 1440 min | <= 24.0 hour | Curing |
Silikony Polskie Gumosil WW Silicone Rubber Flexible with good tearing resistance |
|||
Cure Time | 1440 min @Temperature 25.0 °C |
24.0 hour @Temperature 77.0 °F |
|
Tra-Con Tra-Bond 2111 Rigid Epoxy Staking Compound TRA-BOND 2111 is a thixotropic epoxy resin and hardener formulation developed for industrial adhesive, staking, laminating, repair and manufacturing applications where long pot-life, good wetting, n.. |
|||
Cure Time | 1440 - 2160 min | 24.0 - 36.0 hour | At RT |
Tra-Con Tra-Bond 516H02 Fiber Optic Adhesive TRA-BOND 516H02 is a low viscosity, room temperature or low temperature curing fiber optic adhesive with good stress relief, high adhesion, and low shrinkage upon cure. TRA-BOND 516H02 contains very.. |
|||
Cure Time | 1440 min @Temperature 25.0 °C |
24.0 hour @Temperature 77.0 °F |
Full Cure; Steel |
Loctite® 680 High Strength/High Viscosity Retaining Compound RetainersLoctite Corporation, the pioneer of anaerobic adhesives, has applied this technology to create retaining compounds that increase the shear strength of cylindrical, non-threaded assemblies. .. |
|||
Cure Time | 1440 min @Temperature 22.0 °C |
24.0 hour @Temperature 71.6 °F |
|
Dow Corning 735 OIL RESISTANT SEALANT Black RTV that resists most oils, coolants, etc.Information provided by Dow Corning |
|||
Cure Time | 1440 min @Temperature 25.0 °C |
24.0 hour @Temperature 77.0 °F |
|
Cytec (Conap) RN-1000 / EA-87 Conapoxy® Resin / Conacure® Hardener Epoxy Potting and Encapsulating Systems for Electronic ApplicationsHigh technology epoxy resin systems for potting and encapsulation, for the defense, aerospace, electronics, computer, automotive an.. |
|||
Cure Time | 1440 min | 24.0 hour | Full Mechanical |
3M Scotchkote™ 80EG 531 Urethane Elastomer Scotchkote Urethane Elastomer 80EG 531 has been specifically developed as an elastomeric repair system with a high degree of flexibility for rebuilding and resurfacing rubber components.Product Feat.. |
|||
Cure Time | 1440 min | 24.0 hour | Rate of Cure, 50% RH |
3M 551 Polyurethane Adhesive Sealant 3M™ 500-Series Polyurethane Construction Sealant, Polyurethane Sealant and Polyurethane Adhesive Sealant products are one component, moisture curing products which form permanent elastic bonds. The.. |
|||
Cure Time | 1440 min | 24.0 hour | Full Cure |
3M Scotch-Weld™ MG100 SF Medical Grade Instant Adhesive 3M™ Scotch-Weld™ Medical Grade Instant Adhesive are intended for use on a wide variety of materials used in the construction of disposable medical assemblies. They will quickly bond metals, plasti.. |
|||
Cure Time | 1440 min | 24.0 hour | Full Cure |
3M Scotch-Weld™ SI5 Surface Insensitive Instant Adhesive 3M™ Scotch-Weld™ Surface Insensitive Adhesives bond rough, porous, contaminated, and acidic substrates including wood, cardboard, veneer, fabric, cork, and leather. SI5 (formerly SB20) is a very l.. |