Electrical Properties | Metric | English | Comments |
---|---|---|---|
Dielectric Strength | 13.0 - 16.0 kV/mm @Thickness 0.100 mm |
330 - 406 kV/in @Thickness 0.00394 in |
short term; ASTM D149 |
Polikim EFALON® C-25 PTFE, 25% Glass Filled C15 and C25 have less thermal expansion, higher wear resistance and less deformation under load compared to virgin Efalon® (PTFE). Applications: Seals, Seal rings, gaskets, valve sets, piston rings.. |
|||
Dielectric Strength | 13.0 - 19.0 kV/mm | 330 - 483 kV/in | ASTM D149 |
Polimersan Plastics POLITEF® (PTFE) with 25% Carbon As a result of Filled-In POLITEF® alloys, apart from all of its superior properties, POLITEF®, according to its usage areas has gained additional properties as described below:Electrical Conductiv.. |
|||
Dielectric Strength | 13.0 - 19.0 kV/mm | 330 - 483 kV/in | ASTM D149 |
Polimersan Plastics POLITEF® (PTFE) with 25% Carbon As a result of Filled-In POLITEF® alloys, apart from all of its superior properties, POLITEF®, according to its usage areas has gained additional properties as described below:Electrical Conductiv.. |
|||
Dielectric Strength | 13.0 kV/mm | 330 kV/in | Short Time; Dry; ASTM D149 |
Resinoid 1363 Phenolic Molding, Glass Reinforced Data provided by the manufacturer.The Resinoid 1300 and 7000 glass fiber reinforced series compounds feature mechanical strength, dimensional stability, electrical insulation, and heat resistance |
|||
Dielectric Strength | 13.0 kV/mm | 330 kV/in | Short Time; Dry; ASTM D149 |
Resinoid 1365 Phenolic Molding, Glass Reinforced Data provided by the manufacturer.The Resinoid 1300 and 7000 glass fiber reinforced series compounds feature mechanical strength, dimensional stability, electrical insulation, and heat resistance |
|||
Dielectric Strength | 13.0 - 22.0 kV/mm | 330 - 559 kV/in | Average value: 16.5 kV/mm Grade Count:6 |
Overview of materials for Polyphenylene Sulfide (PPS) with 30% Glass Fiber Filler This property data is a summary of similar materials in the MatWeb database for the category "Polyphenylene Sulfide (PPS) with 30% Glass Fiber Filler". Specific grades with glass content between 25%.. |
|||
Dielectric Strength | 13.0 - 120 kV/mm | 330 - 3050 kV/in | Average value: 25.5 kV/mm Grade Count:20 |
Overview of materials for Nylon 66/6 This property data is a summary of similar materials in the MatWeb database for the category "Nylon 66/6". Each property range of values reported is minimum and maximum values of appropriate MatWeb .. |
|||
Dielectric Strength | 13.0 kV/mm | 330 kV/in | 150°C for 1,000 hrs; JIS-K-6249 |
Fujipoly Industries Sarcon® GR-Fd Gap Filler Pad Sarcon GR-d is a highly conformable, thermally conductive material in areas where space between surfaces is uneven and surface textures vary. GR-Fd has a mesh embedded overall.Information provided b.. |
|||
Dielectric Strength | 13.0 kV/mm | 330 kV/in | Wet, short term. ASTM D149 |
Sumitomo Bakelite North America 4064 Mineral Filled Electrical Encapsulation Grade Epoxy Rogers electrical encapsulation grade epoxy is recommended for capacitors, resistors, gold lead encapsulation, relays, coils and bobbins.Information provided by Sumitomo Bak North America, Inc. |
|||
Dielectric Strength | 13.0 kV/mm @Thickness 3.00 mm |
330 kV/in @Thickness 0.118 in |
IEC 243 |
Sumitomo Bakelite North America RX® 611 Fiberglass Reinforced Phenolic RX 611 is a fiberglass reinforced phenolic molding compound, with good dimensional stability and good strength at elevated temperatures. Meets ASTM D-5948 Type MFH.Information supplied by Sumitomo.. |
|||
Dielectric Strength | 13.0 kV/mm | 330 kV/in | AC |
Sapco C 220 Steatite Information provided by Sapco. |
|||
Dielectric Strength | 13.0 kV/mm | 330 kV/in | ASTM D149-95a |
Thermoseal KLINGERSIL® C-6327 SBR Binder Gasketing Synthetic FiberModified SBR BinderControlled SwellUse for Low Temperatures and Low PressuresGood with Low Bolt LoadsInformation provided by Thermoseal Inc. |
|||
Dielectric Strength | 13.0 kV/mm | 330 kV/in | |
Elastomer Engineering Elastamide 150 Elastomer Modified RIM Nylon 6 29% crystallinity. Information supplied by Elastomer Engineering. |
|||
Dielectric Strength | 13.0 kV/mm | 330 kV/in | |
Elastomer Engineering Elastamide 300 Elastomer Modified RIM Nylon 6 22% crystallinity. Information supplied by Elastomer Engineering. |
|||
Dielectric Strength | 13.0 kV/mm @Thickness 2.00 mm |
330 kV/in @Thickness 0.0787 in |
ASTM D149 |
Toyobo T-661 Nylon 66, Standard Grade (Conditioned) Features: Non-reinforced, Standard GradeInformation provided by Toyobo. |
|||
Dielectric Strength | 13.0 kV/mm | 330 kV/in | |
Dow Corning SE 4440 LP KIT Two-part, grey, 1:1, addition cure gel, good thermal conductivity, low viscosity.Information provided by Dow Corning |
|||
Dielectric Strength | 13.0 kV/mm | 330 kV/in | DIN 53481 |
DSM Fibre Intermediates Nyrim® 1500 (Conditioned) Conditioned at 23°C and 50% Relative Humidity.Nyrim is a Block Copolymer of Nylon 6 and an elastomer with exceptional properties in impact resistance, fatigue and abrasion resistance. Nyrim is proc.. |
|||
Dielectric Strength | 13.0 kV/mm | 330 kV/in | DIN 53481 |
DSM Fibre Intermediates Nyrim® 2000 (Conditioned) Conditioned at 23°C and 50% Relative Humidity.Nyrim is a Block Copolymer of Nylon 6 and an elastomer with exceptional properties in impact resistance, fatigue and abrasion resistance. Nyrim is proc.. |
|||
Dielectric Strength | 13.0 kV/mm | 330 kV/in | DIN 53481 |
DSM Fibre Intermediates Nyrim® 3000 (Conditioned) Conditioned at 23°C and 50% Relative Humidity.Nyrim is a Block Copolymer of Nylon 6 and an elastomer with exceptional properties in impact resistance, fatigue and abrasion resistance. Nyrim is proc.. |
|||
Dielectric Strength | 13.0 kV/mm @Thickness 1.00 mm |
330 kV/in @Thickness 0.0394 in |
IEC 60243 |
Ascend Performance Materials Vydyne® ECO-315 Nylon 66/6, non-halogenated, ignition resistant, DAM Vydyne® ECO315 is non-halogenated, unfilled, flame-retardant PA66/6 copolymer with excellent strength and toughness. It is lubricated for machine feed and has an Underwriters Laboratories UL 94 fla.. |
|||
Dielectric Strength | 13.0 kV/mm | 330 kV/in | Short Time |
Bulk Molding Compounds BMC 501 Mineral Filled, Glass Fiber Reinforced Compound BMC 501 molding compound is a mineral filled glass-fiber-reinforced compound suitable for compression, transfer and stuffer injection molding. It provides the user with good electrical properties An.. |
|||
Dielectric Strength | 13.0 kV/mm | 330 kV/in | Short Time |
Bulk Molding Compounds BMC 600 Mineral Filled, Glass Fiber Reinforced Polyester Compound BMC 600 molding compound is a mineral filled glass-fiber-reinforced polyester compound suitable for compression, transfer and stuffer injection molding. It is a general purpose material with medium .. |
|||
Dielectric Strength | 13.0 kV/mm | 330 kV/in | Short Time; Dry; ASTM D149 |
Resinoid 1360 Phenolic Molding, Glass Reinforced Data provided by the manufacturer.The Resinoid 1300 and 7000 glass fiber reinforced series compounds feature mechanical strength, dimensional stability, electrical insulation, and heat resistance |
|||
Dielectric Strength | 13.0 kV/mm | 330 kV/in | ASTM D149 |
Gharda Chemicals Gafone™ B2300 Polysupersulfone (PSS)
(discontinued **) Characteristics: Excellent Dimensional properties Transparent Improved Impact Strength and Toughness as compared to PES Excellent Hydorlytic Stability High Stress Cracking Resistance Good Chemical.. |
|||
Dielectric Strength | 13.0 kV/mm | 330 kV/in | Wet, Step by Step |
Cosmic Plastics 6120 Short Glass Fiber Filled Ortho Diallyl Phthalate Molding Compound Data provided by the manufacturer. |
|||
Dielectric Strength | 13.0 kV/mm | 330 kV/in | |
Quadrant EPP Duratron® PI D7015G PI, bearing grade (ISO Data) This grade contains 15 % graphite, added to provide long wear and low friction Good performance at elevated temperature (>425 °C) Good chemical resistance Easily machined from a broad range of shap.. |
|||
Dielectric Strength | 13.0 kV/mm | 330 kV/in | ASTM D149 |
Plaslok 501 Black Electrical Grade Mineral/Flock Filled Phenolic Molding Compound
(discontinued **) Plaslok Corporation was purchased by Plastics Engineering Company (maker of Plenco brand materials) in March 2000. The Plaslok name is no longer in use.Plaslok 501 is a two-stage, mineral and flock.. |