Electrical Properties | Metric | English | Comments |
---|---|---|---|
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | |
Plastcom SLOVAMID 66 GF 40 PA66, 40% glass fibre FeaturesChemically reinforced with 40% glass fibre, suitable for mouldings with high strength and toughness also at minus temperatures. Used in the automotive, engineering and electrical industry. W.. |
|||
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | STN IEC 60243 |
Plastcom SLOVAMID 66 GF 50 Polyamide 66, 50% Glass Fiber FeaturesChemically reinforced with 50% glass fiber, suitable for mouldings with high strength and toughness also at low temperatures. Used in the automotive, engineering and electrical industry. W.. |
|||
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | IEC 60250 |
Polyram PlusTek PA301G2 Nylon 6.6 for Injection Molding, 10% Glass Fiber Reinforced, Heat Stabilized Heat stabilized, 10% Glass fiber reinforced Nylon 6.6 for injection molding applications.Information provided by Polyram. |
|||
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | VDE 0303/4 |
Polyram PlusTek PA301G50 Nylon 6.6, Heat Stabilized, 50% Glass Fiber Heat stabilized, 50% glass fiber reinforced polyamide 6.6 for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | VDE 0303/4 |
Polyram PlusTek PA301G6 Nylon 6.6, Heat Stabilized, 30% Glass Fiber Heat stabilized, 30% glass fiber reinforced polyamide 6.6 for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | VDE 0303/4 |
Polyram PlusTek PA303G33 Nylon 6.6, 33% Glass Fiber 33% glass fiber reinforced, heat stabilized and hydrolysis resistant polyamide 6.6 for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | VDE 0303/4 |
Polyram PlusTek PA303G43 Nylon 6.6, 43% Glass Fiber 43% glass fiber reinforced, heat stabilized and hydrolysis resistant polyamide 6.6 for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | VDE 0303/4 |
Polyram PlusTek PA303G50 Nylon 6.6, 50% Glass Fiber 50% glass fiber reinforced, heat stabilized polyamide 6.6 for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | VDE 0303/4 |
Polyram PlusTek PA305G6 Nylon 6.6, 30% Glass Fiber Heat stabilized, improved surface quality, 30% glass fiber reinforced polyamide 6.6 for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | VDE 0303/4 |
Polyram PlusTek PA309G6 Nylon 6.6, 30% Glass Fiber 30% glass fiber reinforced, UV stabilized polyamide 6.6 for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | IEC 60250 |
Polyram PlusTek PA313G43 Nylon 66 for Injection Molding, 43% Glass Fiber Reinforced, Heat Stabilized Heat stabilized, 43% Glass fiber reinforced Nylon 6.6 for injection molding applications.Information provided by Polyram. |
|||
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | VDE 0303/4 |
Polyram PlusTek PA341G9 Nylon 6.6, 45% Glass Fiber 45% glass fiber reinforced, high stiffness and extreme cold environment, UV stabilized polyamide 6.6 for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | IEC 60250 |
Polyram PlusTek PA823M6 Nylon 6.6 for Injection Molding, 30% Minerals Reinforced, Impact Modified 30% Minerals reinforced, impact modified Nylon 6.6 for injection molding applications.Information provided by Polyram. |
|||
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | VDE 0303/4 |
Polyram PlusTek PA830 Nylon 6.6, Impact Modified Impact modified polyamide 6.6 for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | VDE 0303/4 |
Polyram PlusTek PA840G3 Nylon 6.6, 15% Glass Fiber 15% glass fiber reinforced, impact modified polyamide 6.6 for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | IEC 60250 |
Polyram PlusTek PA840G7 Nylon 6.6 for Injection Molding, 35% Glass Fibers Reinforced, Impact Modified 35% Glass fiber reinforced, impact modified Nylon 6.6 for injection molding applications.Information provided by Polyram. |
|||
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | VDE 0303/4 |
Polyram PlusTek RA844 Nylon 6.6, UV Stabilized Impact modified, UV and heat stabilized polyamide 6.6 for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | VDE 0303/4 |
Polyram PlusTek RA845 Nylon 6.6, Impact Modified Improved impact polyamide 6.6 for good resistance to low temp for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | IEC 60250 |
Polyram PlusTek RA300G7 Nylon 6.6 for Injection Molding, 35% Glass Fiber Reinforced, Heat Stabilized Heat stabilized, 35% glass fiber reinforced Nylon 6.6 for injection molding applications.Information provided by Polyram. |
|||
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | IEC 60250 |
Polyram PlusTek RA301G5 Nylon 6.6 for Injection Molding, 25% Glass Fiber Reinforced, Heat Stabilized Heat stabilized, 25% glass fibers reinforced Nylon 6.6 for injection molding applications.Information provided by Polyram. |
|||
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | VDE 0303/4 |
Polyram PlusTek RA303G4 Nylon 6.6, 20% Glass Fiber 20% glass fiber reinforced, heat stabilized polyamide 6.6 for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | VDE 0303/4 |
Polyram PlusTek RA304G6 Nylon 6.6, 30% Glass Fiber 30% glass fiber reinforced, heat stabilized polyamide 6.6 for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Dielectric Strength | 90.0 - 105 kV/mm | 2290 - 2670 kV/in | Air, 0.125mm Thk Tape; ASTM D149 |
Dalau Dalcon 086 100% Virgin PTFE modified polymer Applications & Industries: General: The static and dynamic friction coefficient are numerically equal, consequently no ’Stick Slip’ occurs. Modified PTFE has an advantage over Homopolymer (Normal .. |
|||
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | ASTM D149, IEC 243 |
EPICHEM Epinyl PA 66 GF 30 H Polyamide 66, 30% Glass, Heat Stabilized Characteristics: 30% glass fibre filled |
|||
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | ASTM D149, IEC 243 |
EPICHEM Epinyl PA 66 GF 30 Polyamide 66, 30% Glass Characteristics: 30% glass fibre filled |
|||
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | |
BASF Luranyl® KR 2403 G6 Polyphenylene Ether + Styrene-Butadiene Blend, 30% Glass Fiber Reinforced General-purpose grade with 30% glass fiber for parts requiring especially good resistance to heat deformation.Applications: parts for hot-water contact, pump housings, fan blades.Data was collected .. |
|||
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | Short Term; ASTM D149 |
Quadrant EPP Quicksilver® UHMW-PE Premium Truck Lining (ASTM Product Data Sheet) |
|||
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | |
BASF Luranyl® KR 2451/3 Polyphenylene Ether + Styrene-Butadiene Blend Especially easy flowing grade containing halogen-free, flame-retardant; mainly used for housings for electrical equipment and in the electronics sector.Data was collected by ISO methods and provided.. |
|||
Dielectric Strength | 90.0 - 95.0 kV/mm | 2290 - 2410 kV/in | Average value: 91.7 kV/mm Grade Count:9 |
Overview of materials for Polyphenylene Ether + Styrene-Butadiene Blend This property data is a summary of similar materials in the MatWeb database for the category "Polyphenylene Ether + Styrene-Butadiene Blend". Each property range of values reported is minimum and ma.. |