Songhan Plastic Technology Co.,Ltd.

Braskem Green PE SGM9450F Blow Film Extrusion and Cast Film Extrusion High Density Polyethylene

Category Polymer , Film , Renewable/Recycled Polymer , Thermoplastic , Polyethylene (PE) , HDPE , High Density Polyethylene (HDPE), Film Grade
Manufacturer Braskem
Trade Name Green PE
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Braskem Green PE SGM9450F Blow Film Extrusion and Cast Film Extrusion High Density Polyethylene.pdf
  Online Service   lookpolymers   27660005
Material Notes:
Description: SGM9450F is a high-density polyethylene, developed for the high molecular weight film extrusion segment produced with bimodal technology. The film produced from this resin has high tenacity and excellent resistance to impact characteristics. This resin has wide molar mass distribution that makes it easier to process. The minimum biobased content of this grade is 96%, determined according to ASTM D6866. Application: Bags in general (like T-shirt bags, Handle Bags, Star Bags, others); Geomembranes.Information provided by Braskem.
Physical Properties Metric English Comments
Specific Gravity 0.952 g/cc
0.952 g/cc
ASTM D1505/D792
Thickness 12.5 microns
0.492 mil
Melt Flow 0.33 g/10 min

@Load 5.00 kg,
Temperature 190 °C
0.33 g/10 min

@Load 11.0 lb,
Temperature 374 °F
ASTM D1238
9.3 g/10 min

@Load 21.6 kg,
Temperature 190 °C
9.3 g/10 min

@Load 47.6 lb,
Temperature 374 °F
ASTM D1238
Mechanical Properties Metric English Comments
Film Elongation at Break, MD 590 %
590 %
Film Elongation at Break, TD 740 %
740 %
Elmendorf Tear Strength MD 58 g
58 g
gF; ASTM D1922
Elmendorf Tear Strength TD 51 g
51 g
gF; ASTM D1922
Dart Drop Test 245 g
0.540 lb
g/F50; ASTM D1709
Film Tensile Strength at Break, MD 85.0 MPa
12300 psi
Film Tensile Strength at Break, TD 45.0 MPa
6530 psi
Heat Seal Strength Initiation Temperature 125 °C
257 °F
Descriptive Properties Value Comments
Puncture Strength 80 J/m
Copyright © All Rights Reserved