CeramTec ALUTIT® S Aluminum Titanate (Strength Optimized)

Category	Ceramic , Oxide , Aluminum Oxide , Titanium Oxide
Manufacturer	CeramTec North America
Trade Name	ALUTIT®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	CeramTec ALUTIT® S Aluminum Titanate (Strength Optimized).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

ALUTIT®, which is produced in a special reaction-sintering process, consists of high-purity aluminum oxide and titanium oxide. It offers excellent resistance to sudden changes in temperature, good heat insulation, low thermal expansion, and good chemical resistance. Typical applications are found in the nonferrous metals casting industry. ALUTIT® S is optimized for strength and is used mainly in riser tubes.

Physical Properties	Metric	English	Comments
Density	3.35 g/cc	0.121 lb/in³
Porosity	12.5 %	12.5 %
Pore Size	0.100 microns	0.00394 mil	Average Radius

Mechanical Properties	Metric	English	Comments
Modulus of Elasticity	20.0 GPa	2900 ksi
Flexural Strength	40.0 MPa	5800 psi	Bending Strength

Thermal Properties	Metric	English	Comments
CTE, linear	<= 1.00 µm/m-°C @Temperature 20.0 - 600 °C	<= 0.556 µin/in-°F @Temperature 68.0 - 1110 °F
Thermal Conductivity	1.50 W/m-K	10.4 BTU-in/hr-ft²-°F

Descriptive Properties	Value	Comments
Thermal Shock Resistance R1 (K)	700	maximum air/fluid temperature gradient

Users viewing this material also viewed the following: