Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Flexural Strength | 40.0 MPa | 5800 psi | |
Plastcom SLOVALEN PH 51 N PP, basic type FeaturesModified homopolymer PP for injection moulding. General use in all industry branches - packing material, garden flowerpots, toys, furniture industry, hinges, fasteners, clamps, office chairs.. |
|||
Flexural Strength | 40.0 MPa | 5800 psi | |
Plastcom SLOVALEN PH 59 GB 20 PP, 20% glass beads, mod. of mech. prop. FeaturesModified homopolymer PP for injection moulding, chemically reinforced with 20% glass beads, contains the modifier of mechanical properties. Increased strength in comparison with unfilled PP... |
|||
Flexural Strength | 40.0 - 50.0 MPa | 5800 - 7250 psi | ASTM D790-03 |
Proto3000 Objet Digital Materials™ DM_4310 Polypropylene-like Prototyping Polymer Primary material: DurusWhiteSecondary material: VeroWhitePlus, VeroBlue, VeroBlack or FullCure720Digital Materials are made up of two Objet materials. The two materials are combined in specific conc.. |
|||
Flexural Strength | <= 40.0 MPa | <= 5800 psi | ISO 178 |
Polykemi AB POLYfill PPH GF1020 Polypropylene Homopolymer, Glass Fibre-Reinforced Information provided by Polykemi AB |
|||
Flexural Strength | 40.0 MPa | 5800 psi | ASTM D790 |
PolyOne Maxxam™ DP 9052-3-1000 Polyethylene, High Density (HDPE) PolyOne's Maxxam™ family of polypropylene- and polyethylene-based products covers a wide range of applications, markets and performance requirements. Standard grades are compounded with calcium car.. |
|||
Flexural Strength | 40.0 MPa | 5800 psi | ASTM D790 |
PolyOne Maxxam™ DP-9156-5-8000 Polypropylene Copolymer (PP Copolymer) PolyOne's Maxxam™ family of polypropylene- and polyethylene-based products covers a wide range of applications, markets and performance requirements. Standard grades are compounded with calcium car.. |
|||
Flexural Strength | 40.0 MPa | 5800 psi | ASTM D790 |
Fiberfil® M-2450 Polypropylene Copolymer Information provided by FIBERFIL Engineered Plastics |
|||
Flexural Strength | 40.0 MPa | 5800 psi | ASTM D790 |
Fiberfil® PP-68/TC/20 Polypropylene Copolymer, 20% Talc Information provided by FIBERFIL Engineered Plastics |
|||
Flexural Strength | 40.0 - 65.0 MPa | 5800 - 9430 psi | |
MarkeTech MC-LD and MC-MD Ultra High Temperature Machinable Ceramics For very high temperatures or where thermal conductivity or thermal shock is important, these machinable alkaline/alkaline earth zirconium phosphate ceramics (NaZr2P3O12 or BaZr4P6O24) are recommend.. |
|||
Flexural Strength | 40.0 MPa | 5800 psi | ISO 178 |
Solvay TECHNYL® PSB 286 PA6, Conditioned Description: Unreinforced polyamide PA6, with very good lubrication, standard for fast injection cycles, for injection molding.Available in: North AmericaProduct Applications: This grade has high fl.. |
|||
Flexural Strength | 40.0 MPa | 5800 psi | ISO 178 |
SABIC Innovative Plastics LNP STAT-KON MD000A PP LNP* STAT-KON* MD000A is a compound based on Polypropylene resin containing Carbon. Added feature of this grade is: Electrically Conductive. |
|||
Flexural Strength | 40.0 MPa | 5800 psi | 2 mm/min; ISO 178 |
SABIC Innovative Plastics LNP STAT-KON MD000I PP (Europe-Africa-Middle East) LNP* Stat-kon* MD000I is a compound based on Polypropylene resin. Added features of this material include: Electrically Conductive, High Impact. |
|||
Flexural Strength | 40.0 MPa | 5800 psi | |
SPS Guang Zhou SAMATâ„¢ EP 5001C(f1) Flame-retarded Polypropylene Characteristic: Good flame retardance, non-halogen, high flow properties, high rigidity, high heat resistance, meets the requirements of RoHs and PaHs, excellent UV resistanceApplications: X'mas dec.. |
|||
Flexural Strength | 40.0 MPa | 5800 psi | ISO 178 |
Techmer ES Plaslube® NY-6/MS/M PA12 |
|||
Flexural Strength | 40.0 MPa | 5800 psi | ISO 178 |
Styrolution PS 542N HIPS Styrolution PS 542N is an impact polystyrene with high heat resistance.Information provided by Styrolution |
|||
Flexural Strength | 40.0 MPa | 5800 psi | ASTM D790 |
A. Schulman POLYFORT™ FPP 1245U CaCO3 Filled UV Stable Copolymer Polypropylene DescriptionPolyfort® FPP 1245U is a 20% CAC03 filled UV stable copolymer polypropylene product. Information provided by A. Schulman. |
|||
Flexural Strength | 40.0 MPa | 5800 psi | ASTM D790 |
A. Schulman POLYFORT™ FXP 2779U UV Stabilized Copolymer Polypropylene DescriptionPolyfort® FXP 2779U is a 20% talc-filled, UV stabilized copolymer polypropylene.Information provided by A. Schulman. |
|||
Flexural Strength | 40.0 MPa | 5800 psi | ASTM D790 |
A. Schulman POLYFORT™ FPP 1245U CaCO3 Filled UV Stable Copolymer Polypropylene DescriptionPolyfort® FPP 1245U is a 20% CAC03 filled UV stable copolymer polypropylene product. Information provided by A. Schulman. |
|||
Flexural Strength | 40.0 MPa | 5800 psi | ASTM D790 |
Ecomass® 4703ZC57 Stainless Steel Filled Polyurethane Nontoxic alternative to Lead (Pb), weighting and balancing applicationsModerate Specific GravityStainless Steel Filled Polyurethane (TPU)FlexibleInformation provided by Technical Polymers |
|||
Flexural Strength | 40.0 MPa @Treatment Temp. 250 °C, Time 3600 sec |
5800 psi @Treatment Temp. 482 °F, Time 1.00 hour |
ISO 178; IEC/EN 60893-2 5.1 |
Elektro-Isola G-Etronax SI Silicone, Glass Fabric Reinforcement, White, Sheets Description: Electrical and electrotechnical applications. Suitable as high-frequency insulation on account of its dielectric loss. Used as, among other things, an insulation material in large induc.. |
|||
Flexural Strength | 40.0 MPa | 5800 psi | cond; ISO 178 |
DSM EcoPaXX® Q-X07207 PA410-I Impact Modified |
|||
Flexural Strength | 40.0 MPa | 5800 psi | ASTM D790 |
Aclo Accutech Polypropylene Homopolymer HP0334M10L Mica Reinforced |
|||
Flexural Strength | 40.0 MPa | 5800 psi | at max force; ISO 178 |
BASF Ultramid® C3U10 BK 23079 PA6/66 FR (Conditioned) Description: Flame-retardant injection-molding grade; light colorable. Burning behavior optimized for glow-wire requirements of IEC 60335. Typical applications are switches, housings, plug connector.. |
|||
Flexural Strength | 40.0 MPa | 5800 psi | ISO 178 |
BASF Ultramid® S3K Balance PA 610 (Conditioned) Description: BASF supplies polyamide 610 for processing by injection molding under the trade name Ultramid® Balance which is produced by polycondensation of hexamethylene diamine and sebacic acid. .. |
|||
Flexural Strength | 40.0 MPa | 5800 psi | ASTM D790 |
Aclo Accucomp Polypropylene HPO309L Homopolymer |
|||
Flexural Strength | 40.0 MPa | 5800 psi | ISO 178 |
Azoty Tarnow™ TARNOFORM 300 CI4 POM Impact modified injection molding grade based on Tarnoform 300 reinforced with 20% MBS rubber yielding good cold impact strength and good strength of weld lines combined with good weatherability.Inf.. |
|||
Flexural Strength | 40.0 MPa | 5800 psi | ASTM D790 |
Teknor Apex Sinpolene FRF2074 Polypropylene Availability: Africa & Middle East; Latin America; Asia Pacific; South America Features: Flame Retardant Uses: Appliance Components; Housings Forms: PelletsInformation Provided by Teknor Apex |
|||
Flexural Strength | 40.0 MPa | 5800 psi | ASTM D790 |
Chesterton ARC CS2 Low-viscosity, Composite concrete primer sealer Description: An advanced composite formulated to protect concrete surfaces from mild chemical attack. It is normally applied at a thickness of 250-375 microns (10-15 mils) per coat. Non-shrinking. 1.. |
|||
Flexural Strength | 40.0 MPa | 5800 psi | 2 mm/min; ISO 178 |
Sax Polymers SAXALEN PPH329B20 Polypropylene Homopolymer, 20% Glass Filled SAXALEN PPH329B20 is a 20% glass beads filled Polypropylene - Homopolymer intended for injection molding. Low shrinkage, low warpage gradeInformation provided by SAX Polymers |