Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Microplasmic Anodizing [Ceramic Coating] for Aluminum, Magnesium, Titanium, Zirconium & Composites

Category Ceramic , Other Engineering Material , Ceramic/Metallic Coating
Manufacturer Microplasmic Corp.
Trade Name
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Microplasmic Anodizing [Ceramic Coating] for Aluminum, Magnesium, Titanium, Zirconium & Composites.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Microplasmic Process is for all types of aluminum, magnesium, titanium and zirconium alloys and composite materials.  It is an electrochemical  micro arc oxidation process for which a U.S. patent is issued on March 6, 2001.  A specimen is submerged in the electrolytic solution. A controlled high power AC current is applied to the specimen.  The specimen glows bright due to the  micro-arc created  by the surrounding plasma which creates the oxidation of the surface of the specimen. As the thickness of the coating increases, it moves inside the substrate. Practically, there is no change in the dimension of the specimen. Therefore, a completely finished part can be coated without any finishing afterward. The Microplasmic Process is also suited for a hard coating inside surface of a part i.e. a cylindrical, conical or spherical hollow parts. The Microplasmic process produces an outer soft coating of about 15 % that may be buffed off; and a remaining inner layer of extremely hard ceramic material. It creates a thick ceramic coating which exhibits excellent resistance to wear, heat and chemical corrosion.Typical thickness 0-150+ microns. Corrosion resistant > 2000 hrs salt spray and >500 hrs in 98% sulfuric acid.Information provided by Microplasmic Corporation.
Physical Properties Metric English Comments
Density 3.80 g/cc
0.137 lb/in³
Mechanical Properties Metric English Comments
Hardness, Vickers >= 1400
>= 1400
Modulus of Elasticity 277 GPa
40200 ksi
Young's Modulus
Poissons Ratio 0.21
0.21
Adhesive Bond Strength >= 7.00 MPa
>= 1020 psi
Thermal Properties Metric English Comments
Thermal Conductivity 200 W/m-K
1390 BTU-in/hr-ft²-°F
Maximum Service Temperature, Air 1650 °C
3000 °F
with cooling
Electrical Properties Metric English Comments
Electrical Resistivity >= 5.00e+10 ohm-cm
>= 5.00e+10 ohm-cm
Dielectric Breakdown 800 V
800 V
Break Through Voltage
Copyright © lookpolymers.com All Rights Reserved