Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Microtherm Group MT Thermosphere® Moldable Insulation Paste

Category Ceramic , Oxide , Silicon Oxide , Other Engineering Material
Manufacturer Microtherm Group
Trade Name MT Thermosphere®
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Microtherm Group MT Thermosphere® Moldable Insulation Paste.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
MT Thermosphere® is a low density temperature resistant paste with excellent thermal insulation properties from cryogenic to high temperature exposure. It is a perfectly seamless insulation system. MT Thermosphere® is self drying and moldable. It dries by the evaporation of the water content. If required, it can be finished by painting or the application of a covering material.Non-combustible to Euro Class A1 (DIN EN 13501-1:2002)Hydrophobic at temperatures < 350ºC (662ºF) when set.PropertiesFormulation based on glass microspheres in inorganic binder.Capable of continuous single sided exposure to 650ºC (approx. 1200ºF).Non-combustible to Euro Class A1.Paste will air dry but drying can be accelerated by heating to no higher than 200ºC (approx. 390ºF).No shrinkage when drying.Good thermal insulation.Low density / low weight.Suitable for insulation of complex shapes in inaccessible areas.Environmentally safe.Hydrophobic.Applications Typical application temperature range from -20 to 600ºC (approx. 0 to 1110ºF).Precast shapes for pipes and difficult areas.Penetration seals.Gap sealing in insulation systems for continuity of protection.On site repairs of existing insulation systems.Any application where conventional insulation block or panel is difficult to use.Information provided by Microtherm.
Physical Properties Metric English Comments
Density 0.110 g/cc
0.00397 lb/in³
dry
0.330 g/cc
0.0119 lb/in³
wet
Thermal Properties Metric English Comments
Specific Heat Capacity 0.840 J/g-°C
0.201 BTU/lb-°F
Thermal Conductivity 0.0370 W/m-K

@Temperature -20.0 °C
0.257 BTU-in/hr-ft²-°F

@Temperature -4.00 °F
@ 110 kg/m³; ASTM C177, ISO 8302, DIN EN-12667:2001-05
0.0380 W/m-K

@Temperature 10.0 °C
0.264 BTU-in/hr-ft²-°F

@Temperature 50.0 °F
@ 110 kg/m³; ASTM C177, ISO 8302, DIN EN-12667:2001-05
0.0420 W/m-K

@Temperature 50.0 °C
0.291 BTU-in/hr-ft²-°F

@Temperature 122 °F
@ 110 kg/m³; ASTM C177, ISO 8302, DIN EN-12667:2001-05
0.0470 W/m-K

@Temperature 100 °C
0.326 BTU-in/hr-ft²-°F

@Temperature 212 °F
@ 110 kg/m³; ASTM C177, ISO 8302, DIN EN-12667:2001-05
0.0580 W/m-K

@Temperature 200 °C
0.403 BTU-in/hr-ft²-°F

@Temperature 392 °F
@ 110 kg/m³; ASTM C177, ISO 8302, DIN EN-12667:2001-05
0.0700 W/m-K

@Temperature 300 °C
0.486 BTU-in/hr-ft²-°F

@Temperature 572 °F
@ 110 kg/m³; ASTM C177, ISO 8302, DIN EN-12667:2001-05
0.0850 W/m-K

@Temperature 400 °C
0.590 BTU-in/hr-ft²-°F

@Temperature 752 °F
@ 110 kg/m³; ASTM C177, ISO 8302, DIN EN-12667:2001-05
0.102 W/m-K

@Temperature 500 °C
0.708 BTU-in/hr-ft²-°F

@Temperature 932 °F
@ 110 kg/m³; ASTM C177, ISO 8302, DIN EN-12667:2001-05
Maximum Service Temperature, Air 650 °C
1200 °F
for long term exposure
Shrinkage <= 2.0 %

@Temperature 450 °C,
Time 86400 sec
<= 2.0 %

@Temperature 842 °F,
Time 24.0 hour
full soak
Processing Properties Metric English Comments
Shelf Life 12.0 Month

@Temperature >=5.00 °C
12.0 Month

@Temperature >=41.0 °F
Copyright © lookpolymers.com All Rights Reserved