Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

PolyOne OnFlex™ S EH 60A-3S7003 Thermoplastic Elastomer (TPE)

Category Polymer , Thermoplastic , Elastomer, TPE
Manufacturer PolyOne Corporation
Trade Name OnFlex™
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF PolyOne OnFlex™ S EH 60A-3S7003 Thermoplastic Elastomer (TPE).pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
OnFlex™-S EH thermoplastic elastomer compounds are based on hydrogenated styrenic block copolymers. This range of compounds are formulated to deliver a great cost/performance ratio in addition to typical OnFlex™-S properties such as a wide hardness range, good mechanical properties, good processability, good colourability and a wide temperature operating range. OnFlex™-S EH compounds are filled, and are therefore opaque and have a moderately high density.Properties are measured using injection molded plaques.Information provided by PolyOne
Physical Properties Metric English Comments
Density 1.20 g/cc
0.0434 lb/in³
ISO 1183
Mechanical Properties Metric English Comments
Hardness, Shore A 60
60
ISO 868
Tensile Strength at Break 5.00 MPa
725 psi
ISO 37
Tensile Stress 2.30 MPa

@Strain 100 %
334 psi

@Strain 100 %
ISO 37
3.10 MPa

@Strain 300 %
450 psi

@Strain 300 %
ISO 37
Elongation at Break 600 %
600 %
ISO 37
Tear Strength 25.0 kN/m
143 pli
ISO 34-1
Compression Set 25 %

@Temperature 23.0 °C,
Time 259000 sec
25 %

@Temperature 73.4 °F,
Time 72.0 hour
ISO 815
51 %

@Temperature 70.0 °C,
Time 79200 sec
51 %

@Temperature 158 °F,
Time 22.0 hour
ISO 815
78 %

@Temperature 100 °C,
Time 79200 sec
78 %

@Temperature 212 °F,
Time 22.0 hour
ISO 815
Processing Properties Metric English Comments
Melt Temperature 180 - 220 °C
356 - 428 °F
Mold Temperature 30.0 - 60.0 °C
86.0 - 140 °F
Descriptive Properties Value Comments
Features General Purpose
Fogging 1.3 mg
DIN 75201B
Forms Pellets
Generic Material TPE
Generic Material Type Styrenic Thermoplastic Elastomer (TES)
Generic Name Thermoplastic Elastomer (TPE)
Injection Rate Fast
Manufacturer / Supplier GLS Thermoplastic Elastomers
Odor rating 3
VDA 270
Processing Method Injection Molding
Regional Availability Africa & Middle East
Asia Pacific
Europe
North America
South America
RoHS Compliance RoHS Compliant
Uses Appliances
Automotive Applications
Consumer Applications
General Purpose
Industrial Applications
Copyright © lookpolymers.com All Rights Reserved