Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

SABIC Innovative Plastics Prevex BJAX PPE+PS

Category Polymer , Thermoplastic , Polyphenylene Ether/PPO , Polystyrene (PS)
Manufacturer SABIC Innovative Plastics (GE Plastics)
Trade Name Prevex
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF SABIC Innovative Plastics Prevex BJAX PPE+PS.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Foamable resin. All properties at 10% density reduction; 0.250" thick specimens; improved productivity.This data was supplied by SABIC-IP for the Americas region.
Physical Properties Metric English Comments
Specific Gravity 1.01 g/cc
1.01 g/cc
foam molded; ASTM D 792
1.12 g/cc
1.12 g/cc
ASTM D 792
Water Absorption 0.060 %

@Time 86400 sec
0.060 %

@Time 24.0 hour
ASTM D 570
Linear Mold Shrinkage, Flow 0.0060 - 0.0080 cm/cm

@Thickness 6.40 mm
0.0060 - 0.0080 in/in

@Thickness 0.252 in
SABIC Method
Linear Mold Shrinkage, Transverse 0.0060 - 0.0080 cm/cm

@Thickness 6.40 mm
0.0060 - 0.0080 in/in

@Thickness 0.252 in
SABIC Method
Mechanical Properties Metric English Comments
Tensile Strength at Break 32.0 MPa

@Thickness 6.35 mm
4640 psi

@Thickness 0.250 in
ASTM D 638
Tensile Strength, Yield 35.0 MPa

@Thickness 6.35 mm
5080 psi

@Thickness 0.250 in
ASTM D 638
Elongation at Break 14.6 %

@Thickness 6.35 mm
14.6 %

@Thickness 0.250 in
ASTM D 638
Elongation at Yield 6.7 %

@Thickness 6.35 mm
6.7 %

@Thickness 0.250 in
ASTM D 638
Flexural Yield Strength 64.0 MPa

@Thickness 6.40 mm
9280 psi

@Thickness 0.252 in
ASTM D 790
Flexural Modulus 2.13 GPa

@Thickness 6.40 mm
309 ksi

@Thickness 0.252 in
ASTM D 790
Izod Impact, Unnotched 3.09 J/cm

@Temperature 23.0 °C
5.79 ft-lb/in

@Temperature 73.4 °F
ASTM D 4812
Impact Test 46.0 J

@Temperature 23.0 °C
33.9 ft-lb

@Temperature 73.4 °F
Instrumented Impact Energy @ peak; ASTM D 3763
Thermal Properties Metric English Comments
Deflection Temperature at 0.46 MPa (66 psi) 93.0 °C

@Thickness 6.40 mm
199 °F

@Thickness 0.252 in
unannealed; ASTM D 648
Deflection Temperature at 1.8 MPa (264 psi) 78.0 °C

@Thickness 6.40 mm
172 °F

@Thickness 0.252 in
unannealed; ASTM D 648
Vicat Softening Point 111 °C
232 °F
Rate B/50; ASTM D 1525
UL RTI, Electrical 95.0 °C
203 °F
UL 746B
UL RTI, Mechanical with Impact 95.0 °C
203 °F
UL 746B
UL RTI, Mechanical without Impact 95.0 °C
203 °F
UL 746B
Flammability, UL94 V-0

@Thickness 2.99 mm
V-0

@Thickness 0.118 in
UL 94
5VA

@Thickness 4.49 mm
5VA

@Thickness 0.177 in
UL 94
Electrical Properties Metric English Comments
Arc Resistance 60 - 120 sec
60 - 120 sec
Tungsten, PLC code 6; ASTM D 495
Comparative Tracking Index 250 - 400 V
250 - 400 V
PLC code 2; UL 746A
Hot Wire Ignition, HWI 60 - 120 sec
60 - 120 sec
PLC code 1; UL 746A
High Amp Arc Ignition, HAI 15 - 30 arcs
15 - 30 arcs
surface, PLC code 3; UL 746A
High Voltage Arc-Tracking Rate, HVTR 80.0 - 150 mm/min
3.15 - 5.91 in/min
PLC code 3; UL 746A
Descriptive Properties Value Comments
FOAM - ELECTRICAL 6.4 mm Wt Reduction, % 10
-
FOAM - IMPACT 6.4 mm Wt Reduction, % 10
-
FOAM - MECHANICAL 6.4 mm Wt Reduction, % 10
-
FOAM - PHYSICAL 6.4mm Wt Reduction, % 10
-
FOAM - THERMAL 6.4mm Wt Reduction, % 10
-
UV-light, water exposure/immersion F2
UL 746C
Copyright © lookpolymers.com All Rights Reserved