Polymer Property : Bulk Density = 0.800 g/cc Product List

Physical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Physical Properties	Metric	English	Comments
Bulk Density	0.600 - 0.800 g/cc	0.0217 - 0.0289 lb/in³
Nabaltec NABALOX® NO 113 Ground Alumina NABALOX® aluminum oxide has a number of advantages including low sintering temperaturewide sintering rangeflexible processinghigh sintered densities high wear and impact resistanceelectrical insula..
Bulk Density	0.700 - 0.800 g/cc	0.0253 - 0.0289 lb/in³	PEPL-10-W-67
Pearl Engineering PEPLPET F096HA Film Grade Resin Used mainly as PET films/ sheets, known as bright with anti-blocking agent.
Bulk Density	0.700 - 0.800 g/cc	0.0253 - 0.0289 lb/in³	PEPL-10-W-67
Pearl Engineering PEPLPET F097H Film Grade Resin Used mainly as PET films/ sheets, known as Superbright
Bulk Density	0.500 - 0.800 g/cc	0.0181 - 0.0289 lb/inÂ³
Shandong Dongyue Polymer DF-21C PTFE Presintered Resin Usage: The presintered resin is suitable for continuously extruding of all types, pushing and pressing PTFE rod, tube and special shape.Packing: PTFE is packed in double layer PVC bags inside and in..
Bulk Density	0.700 - 0.800 g/cc	0.0253 - 0.0289 lb/inÂ³
Solvay RHODICARE T Surfactant Description: RhodicareÂ® T is high purity grade specifically designed for thickening and suspension in clear formulations. It has high electrolyte stability over a wide range of pH and fast hydrat..
Bulk Density	0.600 - 0.800 g/cc	0.0217 - 0.0289 lb/in³	Powder Density; ISO 60
Vyncolit 2530 W Novolac Phenolic Mineral and organic filled phenolic molding compound with excellent thermal properties.USES: Lamp sockets, special lamp holders, pan handles and knobs.Information provided by Vyncolit, a Sumitomo Ba..
Bulk Density	0.650 - 0.800 g/cc	0.0235 - 0.0289 lb/in³	Powder Density; ISO 60
Vyncolit 2723 W Novolac Phenolic Mineral and organic filled phenolic molding compound with excellent mechanical, thermal and dielectric properties. I2/FO classified under NF F 16-101 (Fire & Smoke classification).USES: Circuit bre..
Bulk Density	0.650 - 0.800 g/cc	0.0235 - 0.0289 lb/in³
Addcomp ADD-VANCE® DS 785 Desiccant masterbatch in PP carrier Fields of application: Highly concentrated desiccant masterbatch for HDPE and PP.Examples: Elimination of moisture from (recycle) polymers in moisture sensitive applications.Mode of action and advan..
Bulk Density	0.500 - 0.800 g/cc	0.0181 - 0.0289 lb/in³
BASF Ultramid® 1C PA6/66 (Dry) Description: Ultramid® 1C forms flexible, scratch-resistant coatings or tough, resilient, abrasion-resistant coverings on plastics, films, nonwovens, fabrics, leather, paper, wood, or metal.Informa..
Bulk Density	0.500 - 0.800 g/cc	0.0181 - 0.0289 lb/in³
BASF Ultramid® A3EG10 50% Glass Filled PA66 (Dry) Description: 50% glass-fiber reinforced injection-molding grade for technical articles of very high stiffness as well as for electric insulating parts.Information provided by BASF
Bulk Density	0.500 - 0.800 g/cc	0.0181 - 0.0289 lb/in³
BASF Ultramid® B3EG6 LS BK 23189 30% Glass Filled PA6 (Dry) Information provided by BASF
Bulk Density	0.500 - 0.800 g/cc	0.0181 - 0.0289 lb/in³
BASF Ultramid® B3M6 BK 23213 30% Mineral Filled PA6 (Dry) Description: 30% Mineral-filled injection molding grade for high impact industrial items having very high dimensional stability, such as automobile wheel covers.Information provided by BASF
Bulk Density	0.450 - 0.800 g/cc	0.0163 - 0.0289 lb/in³
BASF Ultramid® KR 4350 BK 00464 PA6/6T (Dry) Description: For injection-molding and extrusion, exhibiting high toughness, strength and stiffness, low water absorption, high melting point (295 °C [563°F]). The mechanical properties remain con..
Bulk Density	0.500 - 0.800 g/cc	0.0181 - 0.0289 lb/in³
BASF Ultramid® KR 4355 G5 25% Glass Filled PA6/6T (Dry) Description: 25% glass-fiber reinforced product for injection-molding; high toughness, strength and stiffness, low water absorption, high melting point (295°C [563°F]). The mechanical properties r..
Bulk Density	0.500 - 0.800 g/cc	0.0181 - 0.0289 lb/in³
BASF Ultramid® KR 4355 G5 BK 00564 25% Glass Filled PA6/6T (Conditioned) Description: 25% glass-fiber reinforced product for injection-molding; high toughness, strength and stiffness, low water absorption, high melting point (295°C [563°F]). The mechanical properties r..
Bulk Density	0.500 - 0.800 g/cc	0.0181 - 0.0289 lb/in³
BASF Ultramid® KR 4355 G5 BK 00564 25% Glass Filled PA6/6T (Dry) Description: 25% glass-fiber reinforced product for injection-molding; high toughness, strength and stiffness, low water absorption, high melting point (295°C [563°F]). The mechanical properties r..
Bulk Density	0.500 - 0.800 g/cc	0.0181 - 0.0289 lb/in³
BASF Ultramid® KR 4355 G7 BK 00564 35% Glass Filled PA6/6T (Dry) Description: 35% glass-fiber reinforced product for injection-molding; high toughness, strength and stiffness, low water absorption, high melting point (295°C [563°F]). The mechanical properties r..
Bulk Density	0.700 - 0.800 g/cc	0.0253 - 0.0289 lb/in³
BASF Ultrason® E 2010 C6 30% Carbon Filled Carbon fibers and Ultrason® two partners with good properties. The combination of carbon fibers with the amorphous high-temperature plastic Ultrason® guarantees mechanical properties for temperatu..
Bulk Density	0.700 - 0.800 g/cc	0.0253 - 0.0289 lb/in³
BASF Ultrason® E 2010 G4 MR SW 15102 20% Glass Filled PESU Information provided by BASF
Bulk Density	0.500 - 0.800 g/cc	0.0181 - 0.0289 lb/in³
BASF Ultramid® A3EG5 25% Glass Filled PA66 (Dry) Description: Glass fiber reinforced injection molding grade for machinery components and housings of high stiffness and dimensional stability such as coil formers and bearing cages. Also used for el..
Bulk Density	0.500 - 0.800 g/cc	0.0181 - 0.0289 lb/in³
BASF Ultramid® A4H PA66 (Dry) Description: Highly heat aging resistant, medium-viscosity injection-molding grade for highly stressed parts such as bearing cages, gearwheels, spool bodies and chain drive tensioners.Information pr..
Bulk Density	0.500 - 0.800 g/cc	0.0181 - 0.0289 lb/in³
BASF Ultramid® B35EG3 15% Glass Filled PA6 (Dry) Description: 15% glass-fiber reinforced injection-molding grade for gIT applications such as, for example, steering column switches, vehicle mirror housings and the wheels of mountain bikes.Informat..
Bulk Density	0.500 - 0.800 g/cc	0.0181 - 0.0289 lb/in³
BASF Ultramid® B3WG6 HP BK 23210 30% Glass Filled PA6 (Dry) Description: 30% Glass fiber reinforced and heat aging resistant injection molding grade with enhances flowability used e.g. for automobile manifold.Information provided by BASF
Bulk Density	0.700 - 0.800 g/cc	0.0253 - 0.0289 lb/in³
BASF Ultrason® E 2010 HC PESU Information provided by BASF
Bulk Density	0.700 - 0.800 g/cc	0.0253 - 0.0289 lb/in³
BASF Ultrason® E 2010 MR HP PESU Description: Unreinforced, medium viscosity standard injection molding grade for improved demolding behavior with Mold Release. PES-Blend with improved processibility. (High Productivity) Abbreviate..
Bulk Density	0.700 - 0.800 g/cc	0.0253 - 0.0289 lb/in³
BASF Ultrason® S 3010 MR UN PSU Description: Unreinforced, higher viscosity injection molding and extrusion grade, tougher, with improved chemical resistance and demolding optimized. Abbreviated designation according to ISO 1043-1..
Bulk Density	0.500 - 0.800 g/cc	0.0181 - 0.0289 lb/in³
BASF Ultramid® B3UG4 LS BK 23215 20% Glass Filled PA66 FR (Dry) Description: Halogen-free and phosphorus free flame retardant injection-molding grade with outstanding free-flow properties, good electrical properties and low smoke density; resistant to glow wire..
Bulk Density	0.500 - 0.800 g/cc	0.0181 - 0.0289 lb/in³
BASF Ultramid® B3WG6 GP BK 23210 30% Glass Filled PA6 (Dry) Description: 30% Glass fiber reinforced and heat aging resistant injection molding grade used e.g. for automobile manifold.Information provided by BASF
Bulk Density	0.500 - 0.800 g/cc	0.0181 - 0.0289 lb/in³
BASF Ultramid® B3UG4 LS Grey22985 20% Glass Filled PA66 FR (Dry) Description: Halogen-free and phosphorus free flame retardant injection-molding grade with outstanding free-flow properties, good electrical properties and low smoke density; resistant to glow wire..
Bulk Density	0.500 - 0.800 g/cc	0.0181 - 0.0289 lb/in³
BASF Ultramid® B3WG5 BK 00654 PA6 25% Glass Filled BK (Dry) Description: 25% glass-fiber reinforced and heat aging resistant injection-molding grade, for instance, for fan impeller glass-fiber reinforced injection-molding grade for industrial articles and el..