Thermal Properties | Metric | English | Comments |
---|---|---|---|
Specific Heat Capacity | 1.70 J/g-°C @Temperature 100 °C |
0.406 BTU/lb-°F @Temperature 212 °F |
ASTM E1269 |
Eastman BD445 PET
(discontinued **) Voridian Polymer BD445 is primarily targeted for the soft drink and water markets, it is also suitable for use in other beverage containers as well as food and on-food-related applications. This pol.. |
|||
Specific Heat Capacity | 1.70 J/g-°C | 0.406 BTU/lb-°F | Melt |
Covestro Apec® 1700 Polycarbonate
(discontinued **) Key Features:UnfilledSuitable processing methods:Injection moldingFilm extrusionProfile extrusionSheet extrusionCoatingBlow moldingCalanderingTransfer moldingThermoformingInformation provided by Bay.. |
|||
Specific Heat Capacity | 1.70 J/g-°C | 0.406 BTU/lb-°F | Melt |
Covestro Apec® DP 1-9379 Polycarbonate
(discontinued **) Key Features:UnfilledSuitable processing methods:Injection moldingThermoformingInformation provided by Bayer Polymers.As of 1 September 2015, Bayer MaterialScience was separated from Bayer AG and ha.. |
|||
Specific Heat Capacity | 1.70 J/g-°C | 0.406 BTU/lb-°F | Melt |
Covestro Apec® 1800 Polycarbonate Basic gradesoftening temperature (VST/B 120)=185 °CPreprocessingMax. Water content |
|||
Specific Heat Capacity | 1.70 J/g-°C | 0.406 BTU/lb-°F | Melt |
Covestro Apec® 2097 Polycarbonate Easy flowingeasy to demoldUV-stabilizedsoftening temperature (VST/B 120)=202 °CPreprocessingMax. Water content |
|||
Specific Heat Capacity | 1.70 J/g-°C | 0.406 BTU/lb-°F | Melt |
Covestro Apec® DP1-9354 Polycarbonate, Flame Retardant Grade Developmental productflame retardant: V-0/1,5mm (UL 94)V-0/3,0mm (UL 94)5VA/3mm (UL 94)softening temperature (VST/B 120)=185 °Conly opaque colors availablePreprocessingMax. Water content |
|||
Specific Heat Capacity | 1.70 J/g-°C | 0.406 BTU/lb-°F | Melt |
Covestro Bayblend® KU 2-1514 BBS073* Polycarbonate + ABS, Flame Retardant Grade Developmental productHigh heat resistant injection molding gradeimproved chemical resistance and stress cracking behavior compared to KU 2-1514ball indentation temperature = 125 °CVicat/B 120 tempe.. |
|||
Specific Heat Capacity | 1.70 J/g-°C | 0.406 BTU/lb-°F | Melt |
Covestro Desmopan® 790 Polyurethane Extrusion- and injection molding gradehigh mechanical strengthApplicationToothed beltsProfilesInjection molded engineering partsPreprocessingMax. Water content |
|||
Specific Heat Capacity | 1.70 J/g-°C | 0.406 BTU/lb-°F | Melt |
Covestro Desmopan® DP 1080A Polyurethane injection molding gradefree from plasticizershard - soft systemsTechnical partsAs of 1 September 2015, Bayer MaterialScience was separated from Bayer AG and officially adopted its new name – Covest.. |
|||
Specific Heat Capacity | 1.70 J/g-°C | 0.406 BTU/lb-°F | Melt |
Covestro Desmopan® DP 2792A Polyurethane Coating gradedoes not contain any anti-hydrolysis agentfood contact applications are possiblecontact our HSEQ departmentApplicationTextile coatingPreprocessingMax. Water content |
|||
Specific Heat Capacity | 1.70 J/g-°C | 0.406 BTU/lb-°F | Melt |
Covestro Desmopan® DP 3660DU Polyurethane Extrusion- and injection molding gradetransparent up to 6 mm wall thicknesshydrolysis-stabilisedwith special UV stabilizerswith release agentgood wear resistanceApplicationSports shoe solesHosesnon-.. |
|||
Specific Heat Capacity | 1.70 J/g-°C | 0.406 BTU/lb-°F | Melt |
Covestro Desmopan® DP 3695AU Polyurethane Extrusion- and injection molding gradetransparent up to 6 mm wall thicknesshydrolysis-stabilisedwith special UV stabilizerswith release agentgood wear resistanceApplicationSports shoe solesHosesnon-.. |
|||
Specific Heat Capacity | 1.70 J/g-°C | 0.406 BTU/lb-°F | Melt |
Covestro Desmopan® DP 8798A Polyurethane injection molding gradewith special UV stabilizersEasy releaseshort cycle timesApplicationSports shoe solesPreprocessingMax. Water content |
|||
Specific Heat Capacity | 1.70 J/g-°C | 0.406 BTU/lb-°F | Melt |
Covestro Desmopan® DP 9095AU Polyurethane injection molding gradewith special UV stabilizersvery good hydrolysis and microbial resistancegood wear resistancelow warpargeshort cycle timesApplicationEar-tagsPreprocessingMax. Water content |
|||
Specific Heat Capacity | 1.70 J/g-°C | 0.406 BTU/lb-°F | Melt |
Covestro Desmopan® DP 9380A Polyurethane Extrusion- and injection molding gradevery good hydrolysis and microbial resistancegood low-temperature flexibilitycomplies with VDE 0282-10ApplicationCable sheathingsHosesnon-reinforcedPreprocessin.. |
|||
Specific Heat Capacity | 1.70 J/g-°C | 0.406 BTU/lb-°F | Melt |
Covestro Makrolon® 1804 Polycarbonate MVR (300 °C/1.2 kg) 6.0 cm3/10 minhigh viscosityUV stabilizedoptimized for low plate-outimproved flammabilityUL 94 V-2/1.5 mm and 3.0 mmavailable in transparenttranslucent and opaque colorssolid sh.. |
|||
Specific Heat Capacity | 1.70 J/g-°C | 0.406 BTU/lb-°F | Melt |
Covestro Makrolon® 1899* Polycarbonate, Impact Grade Formerly Makrolon DP1-1899MVR (300 °C/1.2 kg) 15.5 cm³/10 minspecial flame retardant systemUL 94V-0/0.75 mmImpact modifiedMedium viscosityEasy releaseVicat softening temperature 50 N; 50 °C/h = 1.. |
|||
Specific Heat Capacity | 1.70 J/g-°C | 0.406 BTU/lb-°F | Melt |
Covestro Makrolon® 2665 Polycarbonate, Flame Retardant Grade ISO 7391-PC,MFR,(,,)-18-9Global gradeMVR (300 °C/1.2 kg) 12.5 cm3/10 minChlorine- and bromine-free flame retardantUL 94V-2/1.5 mm and 3.0 mmMedium viscosityEasy releaseInjection molding - Melt temp.. |
|||
Specific Heat Capacity | 1.70 J/g-°C | 0.406 BTU/lb-°F | Melt |
Covestro Makrolon® 2867 Polycarbonate, Flame Retardant Grade ISO 7391-PC,MFLR,(,,)-09-9MVR (300 °C/1.2 kg) 9.5 cm3/10 minChlorine- and bromine-free flame retardantUL 94V-2/1.5 mm and 3.0 mmMedium viscosityUV stabilizedEasy releaseInjection molding - Melt tem.. |
|||
Specific Heat Capacity | 1.70 J/g-°C | 0.406 BTU/lb-°F | Melt |
Covestro Makrolon® 6267 Polycarbonate, Flame Retardant Grade ISO 7391-PC,MFLR,(,,)-18-9Formerly Makrolon DP1-1872MVR (300 °C/1.2 kg) 19 cm3/10 minFlame retardantUL 94V-0/1.5 mmLow viscosityUV stabilizedEasy releaseInjection molding - Melt temperature 280 - 3.. |
|||
Specific Heat Capacity | 1.70 J/g-°C | 0.406 BTU/lb-°F | Melt |
Covestro Makrolon® 6455 Polycarbonate, Flame Retardant Grade MVR (300 °C/1.2 kg) 12.5 cm3/10 minUL 94V-0/3.0 mmeasy releaseinjection moldingavailable in transparenttranslucent and opaque colorsPreprocessingMax. Water content |
|||
Specific Heat Capacity | 1.70 J/g-°C | 0.406 BTU/lb-°F | Melt |
Covestro Makrolon® AL2447 Polycarbonate ISO 7391-PC,MLR,(,,)-18-9Global gradeMVR (300 °C/1.2 kg) 19 cm3/10 minAutomotive lightingLow viscosityUV stabilizedEasy releaseInjection molding - Melt temperature 280 - 320 °CAvailable in transpa.. |
|||
Specific Heat Capacity | 1.70 J/g-°C | 0.406 BTU/lb-°F | Melt |
Covestro Makrolon® LTG2623 Polycarbonate PreprocessingMax. Water content |
|||
Specific Heat Capacity | 1.70 J/g-°C | 0.406 BTU/lb-°F | |
Hippe PP Polypropylene Lower density compared with PE. Higher hardness and stiffness and better reset features. Non-fragile. Toughness in cold lesser than that of PE. Higher working temperatures than PE, not aromatic-.. |
|||
Specific Heat Capacity | 1.70 J/g-°C | 0.406 BTU/lb-°F | Melt |
Covestro Makrolon® 1243 Polycarbonate ISO 7391-PC,ELS,(,,)-09-9Global gradeMVR (300 °C/1.2 kg) 6.0 cm3/10 minExtrusionHigh viscosityBranchedUV stabilizedEasy releaseAvailable in color code 550111onlyMulti wall sheet/profilesPreprocessi.. |
|||
Specific Heat Capacity | 1.70 J/g-°C | 0.406 BTU/lb-°F | Melt |
Covestro Makrolon® LQ3187 Polycarbonate ISO 7391-PC,MLR,(,,)-09-9Global gradeMVR (300 °C/1.2 kg) 6.0 cm3/10 minOptical lensHigh viscosityUV stabilizedUV 400 cut offEasy releaseInjection molding - Melt temperature 280 - 320 °CAvailable i.. |
|||
Specific Heat Capacity | 1.70 J/g-°C | 0.406 BTU/lb-°F | |
BASF Ultramid® C3U BK 23079 PA6/66 FR (Conditioned) Description: Injection-molding grade with improved flame retardance (free from halogens and phosphorus), used e.g. for impact resistant electrically insulating parts such as contact bases and plug c.. |
|||
Specific Heat Capacity | 1.70 J/g-°C | 0.406 BTU/lb-°F | |
BASF Ultramid® A3K BK 00464 PA66 (Conditioned) Description: Easy flowing injection-molding grade for fast processing. Uses include highly stressed technical parts such as bearings and gear wheels; also electrically insulating parts such as termi.. |
|||
Specific Heat Capacity | 1.70 J/g-°C | 0.406 BTU/lb-°F | |
BASF Ultramid® C3U PA66/6 (Dry) Ultramid C3U is an injection molding, general purpose PA66/6 grade with improved flame retardance. |
|||
Specific Heat Capacity | 1.70 J/g-°C | 0.406 BTU/lb-°F | Melt |
Covestro Makrolon® KU1-1230* Polycarbonate ISO 7391-PC,EFL,(,,)-09-9Developmental productMVR (300 °C/1.2 kg) 8.5 cm3/10 minFlame retardant16 mm Triple wall sheet/B1 classification (DIN 4102)Medium viscosityUV stabilizedExtrusionAs of 1 Sept.. |