- HOME
- POLYMER SEARCH
- Potting/Casting Ceramic
- Aremco Ceramacast™ 675 High Temperature Potting & Casting Material Aluminum Nitride
Aremco Ceramacast™ 675 High Temperature Potting & Casting Material Aluminum Nitride
| Category | Ceramic , Nitride , Potting/Casting Ceramic |
| Manufacturer | Aremco |
| Trade Name | Ceramacast™ |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Aremco Ceramacast™ 675 High Temperature Potting & Casting Material Aluminum Nitride.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Fine grain aluminum nitride castable with high thermal conductivity
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.80 g/cc | 0.0650 lb/in³ | |
| Porosity | <= 3.0 % | <= 3.0 % | |
| Viscosity | 12000 cP | 12000 cP | |
| Thickness | 12.7 microns | 0.500 mil | 0 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Compressive Strength | 13.8 MPa | 2000 psi |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 5.22 µm/m-°C @Temperature 20.0 °C |
2.90 µin/in-°F @Temperature 68.0 °F |
|
| Maximum Service Temperature, Air | 1200 °C | 2200 °F | |
| Shrinkage | <= 0.300 % @Temperature 538 °C |
<= 0.300 % @Temperature 1000 °F |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+13 ohm-cm | 1.00e+13 ohm-cm | |
| Dielectric Strength | 11.8 kV/mm | 300 kV/in |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Dry Time | >= 8 hour | >= 8 hour | Air dry |
| Cure Time | 300 - 420 min | 5.00 - 7.00 hour | 2-4 hrs at 200°F; 3 hrs at 250°F |
| Pot Life | 60 - 120 min | 60 - 120 min | |
| Shelf Life | 12.0 Month | 12.0 Month |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Acid Resistance | Good | attacked by HF |
| Alkali Resistance | Good |
Users viewing this material also viewed the following:
- MarkeTech H-3 Honeycomb Ceramic
- Mearthane Durethaneâ„¢ S DS-380A Solid Polyurethane Elastomer
- SABIC Innovative Plastics Valox® DR51 PBT
- Sawbones Solid Rigid Polyurethane Foam 40 pcf Density
- Hexcel® HexForce™ 5328 Aramid Fabric
- Hexcel® HexPly® M49 120°C Curing Epoxy Matrix
- Arkema Group Rilsan® AESN TL Nylon 12, Flexible Tubing Grade (Conditioned)
- 3M 8430-18 Cold Shrink Connector Insulators
- 3M Balsa Panels
- Industeel Superplast® Stainless Mold Steel
Copyright © lookpolymers.com All Rights Reserved