POLYMER SEARCH

Murtfeldt Murytal® C Acetal Copolymer

Category	Polymer , Thermoplastic , Acetal (POM) , Acetal Copolymer, Unreinforced
Manufacturer	Murtfeldt Kunststoffe GmbH & Co
Trade Name	Murytal®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Murtfeldt Murytal® C Acetal Copolymer.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Thanks to their extremely low absorption of moisture, Murytal® materials are ideally suited for use as electronic isolation components. A fine crystalline structure and high yield strength mean that Murytal® C has a high ability to regain its original form.Special Properties:• High rigidity• Excellent ability to regain its form• Extremely good electric isolation properties• Practically no moisture absorption• Good resistance to chemicals (pH 4 – 13) • Approved for use in the food industry (EU and FDA)• Extremely good machinability• Hydrolysis resistant to 80°CInformation provided by Murtfeldt Kunststoffe GmbH & Co. KG.

Physical Properties	Metric	English	Comments
Density	1.41 g/cc	0.0509 lb/in³	ISO 1183-1
Moisture Absorption at Equilibrium	0.20 % @Temperature 23.0 °C	0.20 % @Temperature 73.4 °F	50% RH
Water Absorption at Saturation	0.80 % @Temperature 23.0 °C	0.80 % @Temperature 73.4 °F

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell M	84	84	dry; ISO 2039-2
Hardness, Shore D	81	81	DIN 53505
Ball Indentation Hardness	140 MPa	20300 psi	dry; ISO 2039-1
Tensile Strength, Yield	66.0 MPa	9570 psi	dry; ISO 527-1
	66.0 MPa	9570 psi	50% RH; ISO 527-1
Elongation at Break	50 %	50 %	dry; ISO 527-1
	50 %	50 %	50% RH; ISO 527-1
Creep Strength	13.0 MPa @Time 3.60e+6 sec	1890 psi @Time 1000 hour	stress leading to 1% elongation; dry; ISO 899-1
	13.0 MPa @Time 3.60e+6 sec	1890 psi @Time 1000 hour	stress leading to 1% elongation; 50% RH; ISO 899-1
Modulus of Elasticity	2.80 GPa	406 ksi	dry
	2.80 GPa	406 ksi	50% RH
Compressive Yield Strength	19.0 MPa @Strain 1.00 %	2760 psi @Strain 1.00 %	dry; ISO 604
	35.0 MPa @Strain 2.00 %	5080 psi @Strain 2.00 %	dry; ISO 604
	67.0 MPa @Strain 5.00 %	9720 psi @Strain 5.00 %	dry; ISO 604
Charpy Impact Unnotched	15.0 J/cm²	71.4 ft-lb/in²	dry; ISO 179-1/1eU
	>= 15.0 J/cm²	>= 71.4 ft-lb/in²	ISO 179
Charpy Impact, Notched	0.700 J/cm²	3.33 ft-lb/in²	dry; ISO 179-1/1eA
Coefficient of Friction, Dynamic	0.30	0.30
Sand Slurry	8.9	8.9	µm/km

Thermal Properties	Metric	English	Comments
CTE, linear	110 µm/m-°C @Temperature 23.0 - 60.0 °C	61.1 µin/in-°F @Temperature 73.4 - 140 °F
	125 µm/m-°C @Temperature 23.0 - 100 °C	69.4 µin/in-°F @Temperature 73.4 - 212 °F
Thermal Conductivity	0.310 W/m-K	2.15 BTU-in/hr-ft²-°F
Melting Point	165 °C	329 °F	ISO 11357-1
Maximum Service Temperature, Air	100 °C @Time 7.20e+7 sec	212 °F @Time 20000 hour
	115 °C @Time 1.80e+7 sec	239 °F @Time 5000 hour
	140 °C @Time <=86400 sec	284 °F @Time <=24.0 hour
Minimum Service Temperature, Air	-50.0 °C	-58.0 °F
Glass Transition Temp, Tg	-50.0 °C	-58.0 °F	ISO 11357-1
Flammability, UL94	HB	HB

Electrical Properties	Metric	English	Comments
Electrical Resistivity	>= 1.00e+14 ohm-cm	>= 1.00e+14 ohm-cm	dry; IEC 60093
	>= 1.00e+14 ohm-cm	>= 1.00e+14 ohm-cm	50% RH; IEC 60093
Surface Resistance	>= 1.00e+13 ohm	>= 1.00e+13 ohm	dry; IEC 60093
	>= 1.00e+13 ohm	>= 1.00e+13 ohm	50% RH; IEC 60093
Dielectric Constant	3.8 @Frequency 100 Hz	3.8 @Frequency 100 Hz	dry; IEC 60250
	3.8 @Frequency 100 Hz	3.8 @Frequency 100 Hz	50% RH; IEC 60250
	3.8 @Frequency 1.00e+6 Hz	3.8 @Frequency 1.00e+6 Hz	dry; IEC 60250
	3.8 @Frequency 1.00e+6 Hz	3.8 @Frequency 1.00e+6 Hz	50% RH; IEC 60250
Dielectric Strength	20.0 kV/mm	508 kV/in	dry; IEC 60243-1
	20.0 kV/mm	508 kV/in	50% RH; IEC 60243-1
Dielectric Loss Index	0.0030 @Frequency 100 Hz	0.0030 @Frequency 100 Hz	dry; IEC 60250
	0.0030 @Frequency 100 Hz	0.0030 @Frequency 100 Hz	50% RH; IEC 60250
	0.0080 @Frequency 1.00e+6 Hz	0.0080 @Frequency 1.00e+6 Hz	dry; IEC 60250
	0.0080 @Frequency 1.00e+6 Hz	0.0080 @Frequency 1.00e+6 Hz	50% RH; IEC 60250

Compliance Properties	Metric	English	Comments
European Food 1935/2004	Yes	Yes
FDA	Yes	Yes

Descriptive Properties	Value	Comments
Color	Natural/Black

Users viewing this material also viewed the following: