Petroquimica Triunfo Trithene® TX 7010 LDPE - Medium Duty Film

Category	Polymer , Film , Thermoplastic , Polyethylene (PE) , LDPE
Manufacturer	Petroquimica Triunfo
Trade Name	Trithene®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Petroquimica Triunfo Trithene® TX 7010 LDPE - Medium Duty Film.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

The Trithene® TX 7010 resin is a low-density polyethylene (LDPE) with high molecular weight, excellent processability with very good mechanical properties. Besides these properties, the material is characterized by excellent draw-down and shrinkage properties. Contains no additives. This product complies with ASTM standard D1248-IA4 and the requirements of Brazilian and corresponding legislation of Mercosul and it is in conformity with FDA Regulations 21 CFR 177.1520 (c) 2.1, to contact with foodstuff.Applications: Thin and general purpose films. Thin shrink film. Coextrusion with PA (Nylon), EVA, PP.Resin Properties: Compressed molded plate. Method ASTM D-1928, procedure C. Film obtained on a 50mm blow film line with barrier screw, 25:1 L/D, 1.0mm die gap, 50µm gauge, 2.3:1 BUR.Information provided by Dax Resinas

Physical Properties	Metric	English	Comments
Density	0.921 - 0.923 g/cc	0.0333 - 0.0333 lb/in³	ASTM D1505
Thickness	50.0 microns	1.97 mil
Melt Index of Compound	0.80 - 1.2 g/10 min @Load 2.16 kg, Temperature 190 °C	0.80 - 1.2 g/10 min @Load 4.76 lb, Temperature 374 °F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	12.5 MPa	1810 psi	ASTM D638
Tensile Strength, Yield	10.0 MPa	1450 psi	ASTM D638
Film Elongation at Break, MD	300 %	300 %	ASTM D882
Film Elongation at Break, TD	625 %	625 %	ASTM D882
Elongation at Break	500 %	500 %	ASTM D638
Secant Modulus, MD	0.100 GPa	14.5 ksi	5%; ASTM D882
Secant Modulus, TD	0.110 GPa	16.0 ksi	5%; ASTM D882
Coefficient of Friction, Dynamic	0.60	0.60	ASTM D1894
Elmendorf Tear Strength, MD	8.00 g/micron	203 g/mil	ASTM D1922
Elmendorf Tear Strength, TD	4.40 g/micron	112 g/mil	ASTM D1922
Dart Drop Test	180 g	0.397 lb	(method A); ASTM D1709
Film Tensile Strength at Break, MD	22.5 MPa	3260 psi	ASTM D882
Film Tensile Strength at Break, TD	20.0 MPa	2900 psi	ASTM D882

Thermal Properties	Metric	English	Comments
Vicat Softening Point	91.0 °C	196 °F	ASTM D1525

Optical Properties	Metric	English	Comments
Haze	9.5 %	9.5 %	ASTM D1003
Gloss	52 %	52 %	45° - Gardner; ASTM D2457
	85 %	85 %	@ 60° Gardner; ASTM D2457

Processing Properties	Metric	English	Comments
Processing Temperature	155 - 165 °C	311 - 329 °F	Plasticizing Zone
	165 - 175 °C	329 - 347 °F	Mixture Zone
Feed Temperature	150 - 160 °C	302 - 320 °F
Adapter Temperature	175 - 185 °C	347 - 365 °F
Blow-up Ratio (BUR)	3.0	3.0	Recommended

Users viewing this material also viewed the following: